Designed to complement the ART-Series or any full-range speaker, the RCF SUB 702-AS MK3 is a portable 12" high-powered active subwoofer well suited for bands, DJs, clubs, touring companies, and rental houses.

The subwoofer's integrated Class-D amplifier delivers 1400W of peak power to the 12" driver, which offers a frequency range of 40 to 120 Hz with a maximum SPL of 129 dB, making it great for small to midsize venues and touring applications. Rear-panel controls include volume, EQ, polarity, and crossover frequency selection. The rugged all-wood cabinet with scratch-resistant polyurea coating makes it durable, easy to carry, and install securely. 

For Small to Midsize Venues    Great for Portable Applications    1400W Class-D Amplifier    12" Woofer, 2.5" Voice Coil    Stereo Crossover, Switchable Frequencies    129 dB Max SPL    Baltic Birchwood Bass-Reflex Housing    Phase-Reversal Switch    Electronic EQ, Soft Limiter, Protections    Stereo XLR 3-Pin I/O

• 1400W Class-D amplifier
• 15” woofer, bass reflex housing
• 40 to 120 Hz frequency response
• 129 dB max SPL
• Stereo crossover
• Switchable crossover frequencies
• Polarity-reverse switch
• Electronic equalization, soft limiter, and protection
• Stereo XLR input, stereo XLR signal output
• Bass Motion Control excursion management

RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self-powered design, long-term reliability, and impressive size/weight to SPL output ratio. Your crowd will be able to have engaging immersive experiences with both live sound or DJing applications.

• RCF's improvements in transducer design make them stronger and more powerful, so the amplifier follows the evolution. With 1400W peak power, the Class-D amplifier manages extreme sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss. The speaker design is energy-efficient so there's no need for a cooling fan.
• The amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet with no moving parts. The stereo input circuit with crossover features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. RCF amplifiers are designed according to EN62368-1 for maximum safety and present a switched-mode power supply section joining high-efficiency with minimum weight.

SUB 7 Series subwoofers can be configured from the rear panel, and features a full set of commands:

• X-Over Preset: 80 Hz / 110 Hz
• Polarity Reverse
• Out Signal: Line / High Pass

• When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
• The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.

• The subwoofer is suitable for a wide range of live sound applications. The rugged all-plywood cabinet is easy to carry and stack due to its light weight. All are equipped with ergonomic handles with rubber grips for easy setup and teardown. The M20 threaded pole mount on the top allows the cabinet to support speakers with a pole mount.
• The heavy-duty polyurea coating, the powder coated metal grille, and the rugged structure of the cabinet withstand long-term use and transportation. Separate housing for the amplifier guarantees component efficiency and reliability. An acoustically transparent sound foam backing on the inside of the grille ensures protection from dust and humidity. With its frontal vented ports, the subwoofer can also be used in recessed spaces.

Related Questions and Answers

Q: 1. Does the monitor have a PQ mode for HDR?

A: Although the SmallHD 702 Touch, does not have a specific mode for HDR, it can utilize LUTS to display various HDR formats.

Q: 2. Will this work with the Canon 24mm TS-E ll ?

A: I have to be very honest. Yes, it works. But, I really prefer my plastic bag. I ended up going back to it because it is so easy to work with. So, for pennies, you can have a wonderful rain cover and I carry 2 or 3 with me at all times.

Q: 3. can I use the 32 bit motu traveler with my 64 bit macOS?

A: Yes, the MOTU Traveler-mk3 FireWire Audio Interface can be used with a 64-bit macOS system. In this scenario, the 32-bit float point recording capabilities of the Traveler are a separate specification to the Mac's 64-bit application processes. The MOTU Traveler-mk3 has the following system requirements for macOS: -G4/500Mhz Power Mac or faster equipped with at least one FireWire port -At least 256 MB of RAM (512 MB or more is recommended) -Mac OS X (version 10.4.9 or later) -A large hard drive (preferably at least 100 GB)

Q: 4. How do I mount the camera in the E-702 elements cover?

A: Undo the long line of velcro. Place your camera into the clear plastic area lens first. Guide your lens through the tube. Their is another velcro which you will fasten around your lens. Fasten the long line of velcro to seal your camera inside. Your hands go in on each side to access the camera. It can be awkward with your camera strap as it will project out through the line of velcro. I imagine if you are set on a tripod you can remove the strap to make everything well sealed. I hope this helps.

Q: 5. Is there a good cable to power the monitor through the dc barrel from the 4pin 12V accessory port on the side of an ursa mini pro?

A: The only recommended DC power option for this is the D-tap power cable from smallHD

Q: 6. Can this input at 24p and output at 60p? What is the latency?

A: Smallhd does not provide display latency. However, This is a professional display with low latency. The SmallHD 702 touch is not a frame rate converter and will output the frame rate that you input.

Q: 7. Does this monitor support touch autofocus if I want to touch the screen to tell my Canon C300 Mark iii which object to auto focus on?

A: The SmallHD 702 Touch 7" On-Camera Monitor does not provide control for the Canon EOS C300 Mark III Digital Cinema Camera Body (EF Lens Mount).

Q: 8. What’s the weight without battery plate?

A: the weight is 18.9 oz / 536 g

Q: 9. does this monitor have an onion skinning feature?

A: No. The following unit does not offer onion skinning.

Q: 10. Does this monitor support simultaneous output on both HDMI and SDI ports from a single source (HDMI or SDI)?

A: Yes, as it is also processing a cross conversion.