Enhance your productivity by connecting the RVP-G8 14-in-1 USB-C 3.2 Gen 2 Docking Stationto your compatible laptop. This comprehensive dock features multiple USB and video ports, supporting up to three 1920 x 1080 Full HD resolution displays or two 4K monitors.

The USB-C 3.2 Gen 2 data port can transfer up to 10 Gb/s with compatible storage drives and other devices, allowing you to quickly transfer large photos and videos. Three USB-A 3.1 Gen 1 ports are available for 5 Gb/s devices. SD and microSD card reader slots allow you to quickly offload photos and videos from your memory cards. Use the USB-C charging port or DC input with a separately purchased power adapter and provide up to 85W charging to compatible laptops. Displays may be attached to the DisplayPort and dual HDMI ports. The Gigabit Ethernet port provides fast and stable connections to wired networks. Additionally, you can plug a headset into the 3.5mm jack.

10 Gb/s USB-C 3.2 Gen 2 Host Connector    2 x HDMI | 1 x DisplayPort    3 x 1920 x 1080, 60 Hz Monitor Support    3 x USB-A 3.1 Gen 1    1 x USB-C 3.2 Gen 2    1 x Gigabit Ethernet | 1 x 3.5mm Audio    SD Card & microSD Card Reader    USB-C Charging Port    DC Power Input    Up to 85W Power Delivery

Simultaneously stream media to up to three Full HD, 60 Hz monitors via the DisplayPort and dual HDMI ports. Please note that macOS and iPadOS devices only support mirror mode.

Keep your laptop charged at up to 85W safely while connecting multiple peripherals.

With 10 Gb/s USB-C connectivity and three USB-A 3.1 Gen 1 ports, experience lightning fast data transfer.

Enjoy the reliability of a stable, wired internet connection with Gigabit Ethernet performance via the RJ45 Ethernet port.

This hub features an SD/microSD card slot for lightning fast photo transfers to your compatible device for immediate browsing and editing. Both slots may be used simultaneously, reaching speeds of up to 104 MB/s.

Related Questions and Answers

Q: 1. Can I put in a drive (Win10 data) that already has data on it? Or do I need to format it in this unit first?

A: The Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station can be used as a docking station for up to five individual drives with their own data.

Q: 2. can it support more harddrive storage capacity with a pci expansion card ??

A: The Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station does not have a PCIe expansion slot.

Q: 3. What is read/write speed?

A: The read and write speeds of the Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station will vary depending on how many drive bays are occupied, which RAID type you have the enclosure set to, the drives used, and how much data is on the drives. But the USB 3.2 Gen 2 connection supports a maximum transfer speed of 10 Gb/s.

Q: 4. 1. Does this work with a Mac? 2. Will the mechanism "sleep" when the Mac goes to sleep and then wake up when the Mac does?

A: The Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station is compatible with Mac, and it won't go to sleep when the Mac goes to sleep. It's powered independently with it's own cable and power supply.

Q: 5. Does this support JBOD (multiple inserted drives being mounted as a single drive in the OS)?

A: The Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station does support JBOD. However, please note if configured as JBOD, the drives will not show up as a single drive. Each drive will show as its own volume.

Q: 6. can this device support hard drive with large capacity such as Seagate x18 18TB?

A: The Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station can be used with any capacity of disk that is supported by your host OS. In most cases an 18TB drive would be fine.

Q: 7. Is it necessary to press the power buttons for each drive for them to power on, or do they connect automatically when plugged in so this can be used as an unattended NAS?

A: With the Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station, you can manually turn your drives on and off with individually allocated power buttons, while a main power button rests on the back of the housing. Please note that this is not a NAS since this has no network capabilities. It is a DAS and will be connected to your computer via USB.

Q: 8. Does it support RAID? If so, which levels?

A: The Sabrent USB 3.2 Gen 2 4-Bay 3.5" SATA Hard Drive Tray-Less Docking Station does not support RAID setups on its own.

Q: 9. how long is the cable?

A: The USB cable included with the Sabrent USB 3.2 Gen 2 4-Bay 3.5" SATA Hard Drive Tray-Less Docking Station is roughly 18" long.

Q: 10. Will the same drives come back on after a power cut without having to press the individual power buttons?

A: The Sabrent USB 3.2 Gen 2 5-Bay 3.5" SATA Hard Drive Tray-Less Docking Station, B&H # SADSSC5B, will require turning each drive on if the power is cut to the enclosure.