The white Atdec AWMS-2-4640 Dual Monitor Arms on Post - Whiteis a dual 18" arm combination attached to a 15.7" post. The two arms can be installed in a dual-row side-by-side or back-to-back configuration for portrait or landscape orientation. The arms will support flat screen monitors weighing up to 26.5 lb each or curved screen monitors weighing up to 17.6 lb each. Advanced cable management keeps wiring clean. Use the -15 to 40° of tilt adjustment, ±90° of rotation, and 360° of pan adjustment to avoid glares and find an ideal viewing angle. This mount attaches to your desk via an F-clamp and works with desks up to 3.1" in thickness.

For Two Displays up to 32"    Holds 26.5 lb per Flat Monitor    Holds 17.6 lb per Curved Monitor    -15 to 40° Tilt    ±90° of Rotation    3.1" F-Clamp    Landscape or Portrait Orientation

Related Questions and Answers

Q: 1. Can I drop the 2 step corner mast riser which i currently have in my apollo into the the corners of this system?

A: No, the Inovativ Insight Monitor Mounting System for Apollo 40 & Two Pro Ultra Arms, B&H # INVM40I2PUA2, is not designed to be used with the Inovativ 2-Stage Corner Mast Riser, B&H # IN500627.

Q: 2. Does this fit directly into the thread provided on the back on the MOZA Air 2?

A: This arm has 1/4"-20 screws. The Moza Air 2 has a 3/8"-16 threaded hole on the front of the handle and 1/4"-20 and 3/8"-16 threaded holes on the bottom. You could use this arm on the bottom of the gimbal as is. To use it on the front handle you will need a 3/8"-16 to 1/4"-20 Reducer Bushing, BH #OB1039. https://bhpho.to/2gGw2Pp

Q: 3. Can this support DLSR cameras? (Canon 6d Mark ii and a lens)

A: Yes, it will support Canon 6d Mark II, providing it will be with the regular lens. If you planning to mount it on the edge of flat surfaces you can use GV-CM3-MMA11H2 (https://www.bhphotovideo.com/c/search?Ntt=gyrovu%20gv-cm3-mma11h2&N=0&InitialSearch=yes&sts=ps)

Q: 4. Can anyone tell me the outer diameter of the pole this mounts on and if if the height can be adjusted quickly (uses a clamp or other quick release, not screws)?

A: It looks like I missed this email, caught it when cleaning up my inbox. But if the info can be used for future buyers, I am happy to respond. The standing support is 1 1/4 Dia., and yes the bracket that supports the arms has a lever (as shown in the picture) that can easily be adjusted up or down. The question wasn't asked, but the standing support is 16 tall. Hope this helps!

Q: 5. Can you tell me the width inside and outside the "fork"? Want to use on different brand arm I already own. Tks!

A: These dimensions for the K&M 23881 5/8" Adapter for Monitor Mount Arms, BH # KMAMMB, are not published by the manufacturer. The outside is about 2.1" and the inside is just less than 2".

Q: 6. I have a glass desk that fits the width requirements, but I'm curious whether or not anyone has mounted it on glass? Any issues?

A: I have it mounted on a small glass top desk, it comes with a small rubber pad wich you just stick on the bracket to tighten. So far it holds good! No complaints.

Q: 7. From the center of the monitor, what is the max height?

A: I would say 18 to the center of the monitor is the max height.

Q: 8. I’m looking to find an articulated arm that will hold the monitor for the c200 when in the Crane 3s - would I be able to make something like this work?

A: yes this would work as long as it's clamped to the handle or the gimbal

Q: 9. What is the easiest way to open the clamp? Is there a trick to make it easier to open? Thanks

A: The Revo VL-6 Vlog Bi-Color 6" LED Ring Light Kit with Dual Accessory Arms, B&H # REVL6, does not have a specific trick to open it. I would recommend looking at the screw and see if it's not too tight, beyond that, using an oil lubricant could help if it happens to be stuck.

Q: 10. Will the clamp fit through a 2.5 inch hole? My cubicle backs up to a wall, i'd have to insert the clamp into the extra cable hole in the desk.

A: It depends on the exact shape and depth of the hole. The mounting flange is just shy of 2.5 but is D shaped (to go along a wall). The flange may or may not fit into the hole as the longest distance from the corner of the D to the opposite rounded edge is closer to 3 . However the clamping depth/height may allow for the rounded portion to fit to the hole and allow you to bring the entire clamp forward so that the rear-flat part of the D can take up the diameter of the hole. If the hole is only 2.5 and the desk thickness is more than 1.5 you might not be able to fit the clamp.But if the desk is about 1.5 and the hole is a generous 2.5 you will probably be fine.