You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Atdec Awms-3-13714 Triple Monitor Mount White

Atdec Awms-3-13714 Triple Monitor Mount White
  • Product Code: eq142368
  • Availability: In Stock

$1,344.00 $1,814.40

The white Atdec AWMS-3-13714 Triple Monitor Mount Whitesupports three displays up to 24" in size. Flat monitors up to 20 lb, and curved monitors up to 17.6 lb each. The display height, optimal viewing angle, and orientation can be set to your preferences with ±90° of rotation and -45 to 50° of tilt.

Built-in cable management helps keep your workspace clear, while rotation limiters prevent interference with walls, partitions, or other displays. Built from lightweight yet durable aluminum, the mount can be easily recycled at the end of its life. The F-clamp desk fixing attaches to desks up to 3.1" in thickness.

Supports up to Three 24" Displays    Holds Flat Monitors up to 20 lb Each    Holds Curved Monitors up to 17.6 lb Each    -45 to 50° of Tilt    ±90° of Rotation    Built-In Cable Management

Parameters
Compatible ModelsDisplays Up to 24"
Mounting-Hole Pattern75 x 75 mm
100 x 100 mm
Load Capacity20 lb / 9.1 kg (Flat Screen)
17.6 lb / 8 kg (Curved Screen)
Mounting CompatibilityDesk Clamp: Up to 3.1" / 7.9 cm
AdjustmentsRotation: 180° (-90 to 90°)
Swivel
Tilt: 55° (-15 to 40°)
Height
ExtensionArm: Up to 28.0" / 71.1 cm
OrientationLandscape, Portrait
Material of ConstructionAluminum

Related Questions and Answers

Q: 1. Does the included power adapter include UK & Euro connectors/adapters? Or just a USA connector?

A: While this is a Multi-Voltage and NTSC/PAL system it will come with USA power connectors. You will just need a basic adapter to use it in the UK or Europe. UK Adapter - https://bhpho.to/2wwuZxK Europe Adapter - https://bhpho.to/3czZpQg

Q: 2. Is this monitor HDCP compliant?

A: Feelworld does not list HDCP compliance in their specs for the FeelWorld T51-H Triple 5" 2 RU HDMI Rackmount Monitor.

Q: 3. Does it work well with a black magic 6k pro

A: Yes. The Delkin Devices Fat Gecko Triple Mount can work for the Black Magic Blackmagic Design Pocket Cinema Camera 6K Pro as the triple mount has a maximum payload of 12lbs.

Q: 4. Does this product cross convert sdi to hdmi?

A: According to manufacturer notes, this does not cross convert signals, it just allows loop throughs on each individual protocol.

Q: 5. Hi. Will it work in dji osmo 4 and boya shotgun mic

A: Yes, you will need a Hot Shoe Adapter for the DJI Osmo 4. https://www.bhphotovideo.com/c/product/1341080-REG/kupo_kg015111_gopro_tripod_mount_with.html

Q: 6. Could I connect this to a 18 wheeler?

A: Yes, the Delkin Devices Fat Gecko Triple Mount can be mounted to an 18-wheeler as long as the surface it's mounted on is smooth.

Q: 7. Would this work inside on a dashboard?

A: Like any suction mount it will work only on a smooth clean surface like glass or the exterior of a car - doubt it would work on a dash

Q: 8. Does the HDMI pass-thru change the signal at all?? Let say you send 1080p23.97 to the monitors as a pre-ATEM, than this will change to say 1080p59 or something?

A: There should be no changes whatsoever to the signal integrity via the HDMI pass-thru.

Q: 9. can I change the angle of side monitors?

A: Angle, tilt and height can be adjusted with all of the monitors in this product.

Q: 10. Can this be mounted to the windshield for a small camcorder to point *outwards*? What accessories might be needed for that?

A: Yes. The Delkin Devices Fat Gecko Triple Mount can be mounted to a windshield . No other accessories are required for the device to suction.

29/08/2024

[Aluminum] I've been very pleased with this mount. I have it holding up an ASUS ROG Swift PG43UQ, which is a little over 31 lbs. Setup is very easy overall, and the mount is definitely beefy, but it does require a good bit of force to set a monitor of this size where you want it and prevent any drooping. Once you get it set, though, it's fantastic to free up the desk space and be able to float your monitor in a position you wouldn't be able to with a stand. I'm using the bolt-through mounting option, so can't speak to the clamp method, but with bolt-through, this thing isn't going anywhere!

5
22/07/2024

[Aluminum] have 3 22 monitors haging from this for at least 6 months now and it's held up great! Stays in perfect balance and has not sagged a millimeter!

5
03/07/2024

[Aluminum] works very well and now I actually have work space again!

5
18/06/2024

[Aluminum] I needed a multi pivot angle display holder for my shop and this fit the bill easy to install move whether temporary permanently it works

5
18/06/2024

[Aluminum] Use it to hold a 49 Dell monitor. Handles it just fine so far.

5
17/06/2024

[Aluminum] This triple arm monitor stand worked great for 5 years even with a 24 Dell-UltraSharp-2408WFP-24-inch monitor at center that is said to be 22 LBS! Have since upgraded to ultrawide.


Solid product overall. I would recommend this product!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Atdec Awms-3-13714 Triple Monitor Mount Silver

$1,344.00 $2,083.20

Atdec Awms-2-d13-f Dual Arm Mount (white)

$1,092.00 $1,692.60

Atdec Awms-2-4640 Dual Monitor Arms (silver)

$984.00 $1,544.88

Atdec Awms-hxb Heavy-duty Monitor Arm Silver

$975.00 $1,433.25

Atdec Awms-hxb Heavy-duty Monitor Arm Black

$975.00 $1,287.00

Atdec Awms-hxb-h Heavy-duty Monitor Arm White

$888.00 $1,065.60

Atdec Awms-hxb Heavy-duty Monitor Arm - White

$975.00 $1,511.25

Atdec Awms-dw Dynamic Arm Wall Mount Black

$582.00 $919.56

Atdec Awms-hx40-h Heavy Duty Arm 400 Post Black

$1,152.00 $1,555.20

Atdec Awms-hx40-h Heavy Duty Arm 400 Post White

$1,152.00 $1,635.84

Wesco Telescoping Handle Platform Truck

$599.85 $875.78

Products You May Like