Portable Carbon Fiber Tripod & Fluid Head Kit Gt254Cf

Portable Carbon Fiber Tripod & Fluid Head Kit Gt254cf

Product Code: eq142771
Availability: In Stock

$537.00 $681.99

Qty

14 reviews Write a review

Description
Reviews (14)

Support your camera rig and perform high and low-angle shots with this Portable Carbon Fiber Tripod & Fluid Head Kit GT254CFfrom INNOREL. The kit includes GT254C carbon fiber legs with interchangeable short and long center columns and the F10 mini fluid head, which includes an Arca-type quick release plate and a pan bar. A carry bag is included to store and transport the kit.

The durable, lightweight carbon fiber legs and the short and long columns can be interchanged to create extreme high- or low-angle shots. Each leg can move independently with easy flip locks, and there are three preset leg angles for each leg at 8, 36, and 66° to remain steady on a variety of surfaces. The rubber feet can be swapped out for spikes, so you can set up the legs on hard or soft surfaces. There are 1/4"-20 and 38"-16 threads on the side for adding accessories.

The F10 head has a flat base with a 3/8"-16 threaded mounting hole that mounts on the tripod's 3/8"-16 threaded screw. It uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 8.8 lb, and it features independent pan and tilt locks. An included smartphone mount and magic arm allow you to mount any phone measuring 2.32 to 3.7" wide.

Video Head with 8.8 lb Payload Portable Carbon Fiber Tripod Easy Flip-Lock System 63" Maximum Tripod Height Short and Long Center Columns Rubber and Spiked Feet Arca-Type Quick Release Plate, Pan Bar 3 x Preset Leg Angles: 8, 36, 66° 1/4"-20 and 3/8"-16 Accessory Threads Includes Smartphone Mount and Magic Arm

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male with Locating Pin
Camera Plate	Quick Release w/ Sliding Balance Plate: Arca-Type
Head Type	Fluid Head
Primary Material	Carbon Fiber
Load Capacity	8.8 lb / 4 kg
Maximum Working Height	63.0" / 160 cm
Closed Length	Not Specified by Manufacturer
Weight	4.7 lb / 2.1 kg
Camera Attachment
Camera Mounting Screw	1x 1/4"-20 Male with Locating Pin
Camera Plate	Quick Release w/ Sliding Balance Plate: Arca-Type
Plate Dimensions	2.4 x 1.5" / 60 x 38 mm
Head
Head Type	Fluid Head
Base Mount	Flat Base with 3/8"-16 Female
Counter Balance	Fixed
Head Dimensions	Base Diameter: 1.7" / 44.00 mm Height: 3.0" / 7.6 cm
Pan & Tilt
Independent Pan Lock	Yes
Independent Tilt Lock	Yes
Vertical Tilt	+90° to -90°
Lateral Tilt	No
Legs
Primary Material	Carbon Fiber
Leg Lock	Twist Lock
Leg Sections	4
Independent Leg Spread	Yes
Leg Positions	3 Positions
Foot Features	Spiked
General
Load Capacity	8.8 lb / 4 kg
Maximum Working Height	63.0" / 160 cm
Center Column	Yes: Ballast Hook, Center Brace, Removable
Closed Length	Not Specified by Manufacturer
Accessory Mounting	1x Pan Handle Fitting 1x 1/4"-20 Female Thread
Bubble Level	Yes
Spreader Support	No
Weight	4.7 lb / 2.1 kg

For DSLR, mirrorless, or compact video cameras up to 8.8 lb
Fluid system for smooth 360° pans and +90/-90° tilts
44mm base diameter with 3/8"-16 base thread
Arca-type quick release plate with 1/4"-20 screw
Dual safety lock system prevents the plate from slipping off the head
Bubble level
Pan handle with foam grip
1/4"-20 accessory thread on the side
Includes magic arm and smartphone mount that fits phones from 2.32 to 3.7" wide

Lightweight carbon fiber construction for a balance of weight and strength
Interchangeable long and short center columns with ballast hooks
63" maximum height
Foam padded legs
Three preset locking leg angles: 8, 36, and 66°
One 1/4"-20 and one 3/8"-16 threaded accessory mounting thread
Interchangeable rubber and stainless steel spiked feet
Includes carry bag

Related Questions and Answers

Q: 1. If you were to remove the camera mount and leg stand from the monopod, how long would the tube be in a completely folded state?

A: It would be approximately 21.6 inches.

Q: 2. What is the difference between MTT705BS with this monopod

A: There is no discernable differences between the MTT705B and MTT705BS aside from their color scheme.

Q: 3. Can the spreader on this tripod be removed?

A: Yes, the spreader is removable. You can use a ground level spreader instead.

Q: 4. Does this head only come as flat base with bowl adapter or is there a version that is 75mm bowl only? I purchased this and can't seem to remove what I thought was a bowl adapter.

A: This video tripod system comes with the Manfrotto 504X Fluid Video Head with Flat Base. You should be able to easily remove the ball adapter. If not, please contact us via phone, 800.606.6969, Live Chat, or email provideo@bhphoto.com.

Q: 5. What is the plate that this tripod uses, because putting the Manfrotto plate is not possible? The clamp on the tripod head is not wide enough for the Manfrotto plates to slide in.

A: The plate style of the CAME-TV 701B is a custom design. The best way to convert the plate style to Manfrotto would be to add this QR adapter. The adapter mounts to the CAME-TV plate and converts it to a Manfrotto 501PL style. https://bhpho.to/3lMNG6A

Q: 6. Can the pan bar be switched from the right side of the head to the left side?

A: Yes, there is a rosette mount on both sides of the tripod head.

Q: 7. Which of the inexpensive systems would you recommend for the Arri Alexa Classic camera?

A: We would recommend the CAME-TV 18T PRO Carbon Fiber 100mm Fluid Head Tripod BH #CACAME18T https://bhpho.to/3kxe07p This model supports - Head 6-20kg Tripod 40kg.

Q: 8. If I put a Manfrotto Move on this will I still be able to fit the tripod with the fluid head on in the included bag? I added one to another tripod I own and it barely fits.

A: The bag included with the Manfrotto 504X Fluid Video Head & 645 FAST Aluminum Tripod with Mid-Level Spreader kit is designed to hold only the tripod and head in this kit.

Q: 9. Does this package contains Mid-Level Spreader, if not what Mid-Level Spreader is recommended?

A: This Tripod comes with a Floor Spreader. At this time we are not aware of any Mid-Level Spreaders that are compatible with this unit. If you need help finding a tripod that will work with a Mid-Level Spreader instead feel free to email us at provideo@bhphoto.com for additional assistance.

Q: 10. Where u can look at it ?

A: The Manfrotto 504X Fluid Video Head & MVTTWINMA Aluminum Tripod with Mid-Level Spreader is on display in the B&H superstore for viewing.

stefan	07/09/2024
[+90° to -90°] I'm using this with a C100 that goes from minimal build to completely decked out (Rods, external recorder, EVF, Matte Box, etc.) big weight differences. The head has functioned beautifully, showing only a bit of limitation when really weighted down. Just got back from a six country shoot, where it was set up and broken down a lot. No problems with travel at all. All in all, it's great to be able to have a Sachtler Tripod for this price. What a world. 5

anyonymous	03/09/2024
[4] I couldn’t be happier with my decision to go with the TS100CF-Q tripod—it's the lightest 100mm bowl option available, making it a breeze to carry around. The included shoulder strap for the carry bag is a game-changer for me, making transportation to and from locations effortless. Adding an extra base plate to all my cameras was a smart move, allowing for rapid setup, and the 1-lever, 2-stage feature on the legs is a huge time-saver on set. 5

Luke	22/08/2024
[Yes] I was looking for heavy duty tripod for my Alexa, it weighs about 35-40lbs with all the accessories on it. This was the only option other than spending over 10k on oConnor Tripod. I was my suspicions because of cheap price but it turned out great. Amazing head that holds my camera without any trouble, great leg with easy pull setup. I recommend it. 5

Salvatore	11/08/2024
[4] Have used this tripod a couple of times since I received it. Legs are very smooth rising and lowering with a weight of a camera on it. 100mm bowl with illuminated light makes it super easy to level the camera. 6 levels of pan and tilt friction gives you great creative control of how you can smoothly move the camera to capture your vision. Top plate sliding also lets you balance your front to back weight. Everything works perfectly to make it a very solid tripod purchase. I highly recommend this tripod to anyone looking to hold something more than just a DSLR. 5

Peter	22/07/2024
[Twist Lock] I’m a retired cinematographer with Hollywood credits. I bought this iFootage combo to continue learning digital cine techniques with an iPhone 15 Pro Max. This kit works perfectly. It’s lightweight, easy to set up and my operating still looks great. Highest possible recommendations for both the tripod and the K5 head in this application. 5

Jeff	12/06/2024
[Yes] Of all the tripods I've used, this one is a beast at a great price. I purchased a used model only it's aluminum. Although the carbon fiber model is slightly lighter, I don't notice that much of a difference. This baby holds a lot of weight. In addition, the tripod head is nice and smooth, but better than previous models I owned. I highly recommend this unit for any serious videographer. 5

Richard	07/06/2024
[Twist Lock] To me it looks and feels just like a Sachtler 18 S2 ENG 2 CF Video 18 S2 Fluid Head with ENG 2 CF Tripod and Ground Spreader except for the handle looks a little different and the Cam-TV logo, which I covered with my contact info (white text on black label stickers, which looks clean). Clients probably think it's a Sachtler. But more importantly it is buttery smooth, fully adjustable, and sturdy. There's only a few potential cons in my view. There's only the floor spreader available, but you can take it off if you're ever on rough terrain. In that case I might use something like the Oben Tripod Hammock to add stability in that rare situation. For me 95% of the time I'm on a fairly smooth flat surface. Another unknown is how it would be to have this brand serviced, but in my case I take good care of equipment and it's not getting used like a rental house. I'm ok with those downsides for the benefit of saving 5K or more. 5

Heather	25/05/2024
[Spiked] Best tripod i ever owned, incredibly stable and smooth! 5

Charles	08/05/2024
[Carbon Fiber] I put this tripod to the test. It's currently sitting on top of a 4-floor office building, holding a time-lapse camera. While being held in place by sandbags, it has been through some high winds and foul weather and it's holding strong. It is also a very smooth head. Pans and tilts like a dream. It's also very light. I carried it up a ladder to get on the roof and it wasn't too much of a challenge. Highly recommend this camera. 5

Michael	21/04/2024
[Spiked] After years of using Sachtler tripods, switching to this TS100CF-Q has been a game changer. It can counterbalance my RED and Pictor Zooms. The variable drag feature enables precise adjustment of the shot, whether I'm aiming for a slow pan or a whip. With the pan drag zeroed out, It recently handled a 360 pan shot seamlessly—something that an OConnor head cannot do. I also purchased the mid-level spreader and feet. Which were a necessary for my outdoor shoots and allowed me to get lowered angled shots. 5