You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Sony Burano Shoulder Cage Set | Shape Broadcast

Sony Burano Shoulder Cage Set | Shape Broadcast
  • Product Code: eq142811
  • Availability: In Stock

$6,019.20 $7,824.96

This Broadcast Shoulder Cage Set from SHAPE adds a custom-built cage system with multiple 1/4"-20 and 3/8"-16 threaded mounting points to the Broadcast Shoulder Baseplate for an even more comprehensive rig system designed for your Sony BURANO. The modular unit features a VCT baseplate that works perfectly with the Sony BURANO and a wide variety of other cameras. It includes a set of left and right handgrips boasting ARRI-style rosettes and a 15mm rod block system.

The two lightweight 15mm rod blocks can be affixed to both the front and rear sections of the baseplate, facilitating the attachment of additional camera accessories. Included are two pairs of 15mm rods measuring 8 and 4", respectively, and crafted from dependable aluminum coated with a clear finish. The integrated safety ratchet knobs are engineered to apply optimal pressure to the rods.

For enhanced comfort, the thick shoulder pad is constructed with gel padding and slip-resistant material. The baseplate features a sophisticated tool compartment for storing extra screws and an Allen key. This convenient access to supplementary screws proves invaluable, especially during active shoots. The shoulder plate incorporates 1/4"-20 and 3/8"-16 threaded holes for storing extra screws and a magnet at the rear for attaching the included Allen key.

Designed for Sony BURANO    Shoulder Baseplate with Handles Included    Handgrips with ARRI-Style Rosettes    15mm Rod Block with Safety Ratchet Knob    Integrated Cable Connector Protector    Compatible with FX9 Factory Top Handles.    CNC Aluminum Construction

Parameters
Support TypeBaseplate, Shoulder Support
Grip TypeDual Handgrips
Camera CompatibilitySony BURANO
Mounting
Rod Standard15 mm (Unspecified Spacing)
Included Rods2x 8" / 20.3 cm Aluminum Rod
2x 4" / 10.2 cm Aluminum Rod
Battery Plate TypeNo
Accessory MountingTop Plate, Top
Multiple Anti-Twist 1/4"-20 Female Thread
Multiple Anti-Twist 3/8"-16 Female Thread
Tripod MountingVCT-14
Rod PortsRod Blocks, Base
2x 15 mm Rod Port
Shoe MountingNo
Rosettes2x ARRI Rosette w/ M6 Female Thread
General
MaterialsAluminum
Dimensions23 x 16.5 x 13" / 58.4 x 41.9 x 33 cm
Weight7.6 lb / 3.4 kg
Packaging Info
Package Weight7.6 lb
Box Dimensions (LxWxH)21.1 x 8.3 x 4.9"

  • Front-to-back sliding plate for quick positioning of your camera accessories and optimal weight distribution
  • Protective rubber pads on top of the plate
  • Two standard ARRI rosettes on handles
  • Adjust the height of your rod block to match your camera’s optical center
  • Comfortable and moveable shoulder pad made of slip-free material and gel padding
  • Front and rear 15mm lightweight rod blocks with two pairs of 15mm rods (8 and 4") to mount more camera accessories
  • Safety pins prevent the upper plate from sliding
  • Ratchet knob applies optimal pressure to the rods
  • Sophisticated toolbox to store your extra screws and Allen key

Related Questions and Answers

Q: 1. What size baseplate?

A: Hello Jack, Thank you for your question! If you mean the actual physical size of the baseplate included with our FX6 cage ? Here are the specs:7 inch long x 3 1/4 wide and 7/8 high. These specs are in inches. We hope this helps and we thank you for our interest in our products. The SHAPE team

Q: 2. What type of ND filters can fit on the Matt box? Can I find compatible glass filters?

A: Hi,Our Matt box are compatible with 4x4 filters , I am sure you can find those type of filters at your B&H store !Best regards

Q: 3. Is it possible to use the baseplate with a tripod with the assistance of a quick release plate and which would be the best to use with this rig?

A: Hello Jay, Thank you for your question! Indeed it is possible. You can easily attach any tripod quick release plate underneath all of our baseplates. Any video tripod which has a quick release plate, not too big would be ideal. We hope this helps and we thank you for your interest in our products. The Shape team.

Q: 4. is it compatible with the a7riii

A: Sorry, no this will not work with the Sony a7R III. Shape is currently at work making a cage for that camera. Note: since cages are form-fitting, assume that if it does not mention the camera you are using in the name of the cage, it does not fit. If you must use a cage now and no one has a cage, get a universal type that is three sided and adjustable.

Q: 5. Will this work with an FS7 M2?

A: Hello Tania, Thank you for contacting us! Unfortunately, this camera support was specifically designed for the Sony FS5. We cannot guarantee it will fit for the Sony FS7M2. We do have a line of products for the Sony camera that will give you several interesting solutions. We invite you to visit our Sony FS7Mii page on our website. a href= https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx target= _blank https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx/aWe hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 6. Does the cage come with the base plate for the 15mm rods?

A: No it does not. This is for the cage by itself. Here is the link for the baseplate SHAPE 15mm Lightweight Baseplate for Sony FX6 B&H # SHB15FX6 MFR # B15FX6 https://www.bhphotovideo.com/c/product/1622253-REG/shape_b15fx6_15mm_lightweight_baseplate_for.html Here is a link for the Cage and the Baseplate SHAPE Camera Cage and 15mm LWS Baseplate for Sony FX6 BH #SHFX6ROD • MFR #FX6ROD https://www.bhphotovideo.com/c/product/1622261-REG/shape_fx6rod_camera_cage_and_15mm.html

Q: 7. Does the center piece where the top handle fits in come with the camera cage?

A: Yes, the camera cage comes as pictured in the main photo illustration of the unit.

Q: 8. The Shape Cinema Cage work well with Sony a6300?

A: Hello Thiago, Thank you for your question! Unfortunately, our Cage system was designed specifically for the Sony A7Sii. Trying to fit another model would be a bit risky. But stay tuned for more cages and systems from SHAPE in 2017. We will surely come out with systems compatible for this camera.We hope this answers your question and we thank you for your interest in our products.The SHAPE team

Q: 9. I noticed in the video produced by Shape there is a film plane set screw for a tape measure. I did NOT that receive very specific screw with the Shape FX9 tpo bracket. If it's not part of the top plate where can I purchase one?

A: Hello Paul, Thank you for reaching out to us! As discussed on the phone on monday, the set screw is normally supplied with the FX9 camera. You can try to contact Sony directly if they can send you one. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 10. What size filters does this matte box hold? Shape has multiple swing away matte boxes, so I'm not sure which model this is.

A: The matte box included in the SHAPE Broadcast Pro Kit for Sony BURANO is the SHAPE Swing-Away Matte Box, BH #SHAKSWA, which is designed for 4 x 5.6" and 4 x 4" filters.

24/09/2024

[7.6 lb] Solid camera cage with a huge top handle. Built to last.

5
11/09/2024

[7.6 lb] First camera cage system from BT and it's awesome. I bought the original Kasbah system alongside the Misfit kick back in the day and was impressed by the functionality, quality, and their efforts to keep things light weight while still strong/solid. When it came time to get a cage for the Burano, I knew I wanted to try BT over the other options that were first to market apon its launch. The side rails connecting top and bottom inspire confidence for mounting things pretty much anywhere on the rig. The sliding top plate is slick, I'm getting another one for quick swaps to my movi alongside a BUD plate for the bottom. The D handle is solid and comfy. Paired with my Kasbah shoulder rig, its the quickest to build and comfiest to shoulder all day compared to other systems I've tried/built in my AC days. You won't regret it! Also the customer service is TOP with BT. They just called me within 15 mins to get clarification on a support email I sent regarding plate compatibility. Who does that these days?!

5
29/08/2024

[Sony BURANO] I shot videos of myself making things in my work shop. I wanted the monitor to be protected from getting banged around. Also I am using a Small Rig tilt/swivel fitting so you are constantly pulling on the monitor. Having this strong cage saves any wear and tear on the 1/4-20 mounting thread

5
22/08/2024

[Sony BURANO] This shoulder mount is comfortable enough to shoot for hours. And with any and all of the attachments that You could need for a shoot, you cannot beat it for the price. It's durable and easy to put together and is relatively lightweight once fully assembled.

5
18/08/2024

[VCT-14] I was kind of hesitant at first about buying this but I really do enjoy this cage this is really nice cage it's not real heavy and it has a great finish on it and it does protect my shinobi really well and I'm glad I got it I love it that you can also mount it in several different places on your camera cage as well great product!!

5
14/08/2024

[7.6 lb] I needed a compact set up for my Sony FX3 and this cage delivers. I
really like the feel of the wooden handle, and having anti-twist
stoppers within the cage is always a plus - It's high quality.

5
06/08/2024

[7.6 lb] For the flimsy material Atomos uses for the Shinobi this is a must to protect it not to mention the price. Just protect it and if you travel a lot it is well worth it.

5
19/07/2024

[Dual Handgrips] I've tried several cage/baseplate options for the FX6, and this one is the best!

5
17/06/2024

[Aluminum] Very well built, fits perfect , only problem was it didn't come with the hardware to install it to the monitor. Missing were {2} 1/4 x1/2socket head cap screws. Had to go to the local hardware store to purchase.
Thanks again B&H for all your help as usual great service.
Thanks
 A happy customer

5
13/06/2024

[Sony BURANO] Super solid, very industrial. It looks like Shape has improved their finish - this is more polished than previous machined parts of theirs I've rented. Lifetime warranty sounds great, but I honestly doubt many people end up using it.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Sony Burano Shape Cine Cage

$1,845.36 $2,214.43

Arri Broadcast Set For Sony Burano

$6,540.00 $10,398.60

Mid49 Cage Kit For Sony Burano With Shockmount

$3,870.00 $4,760.10

Shape Broadcast Pro Kit For Sony Burano

$11,534.16 $14,648.38

Arri Broadcast Set For Sony Venice 1/2 | Arri

$6,330.00 $8,102.40

Arri Pro Broadcast Set Sony Burano

$11,070.00 $15,830.10

Sony Fx6 Shoulder Mount | Shape Accessories

$1,845.36 $2,417.42

Shape Remote Kit For Sony Burano

$657.36 $992.61

Chrosziel Cage Kit For Sony Burano Cinema Camera

$6,564.00 $10,305.48

Sony Fx6 Camera Cage | Shape Accessories

$789.36 $1,073.53

Arri Cine Set For Sony Burano | Basic Kit

$4,800.00 $6,048.00

Arri Pro Broadcast Set For Sony Venice 1/2

$10,890.00 $13,939.20

Tilta 19mm Studio To Arri Base Plate

$2,340.00 $3,088.80

Products You May Like

Zacuto Act Recoil Rig For Z Cam E2 Series

$2,997.00 $3,656.34

Sightron Objective Stop Ring For Optics

$89.97 $142.15

Klipsch Rp-1000sw 10" 600w Subwoofer

$1,197.00 $1,508.22

Nanuk N-cubik Organizer Insert Black 8l

$239.85 $321.40

Kramer Va-102p12 5-output Power Supply 12vdc

$1,464.00 $2,108.16

Swarovski Z5 3.5-18x44 Riflescope Matte Black

$4,497.00 $5,711.19

Apple Studio Display

$2,799.00 $3,862.62