Ashly Protea Ne24.24Mt Dsp 16X4 I/O Matrix Processor

Ashly Protea Ne24.24mt Dsp 16x4 I/o Matrix Processor

Product Code: eq143001
Availability: In Stock

$8,547.00 $11,025.63

Qty

10 reviews Write a review

Description
Reviews (10)

Control and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I/O and functionality. This model includes three 4-channel input cards.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

Standard I/O: 4 Inputs & 4 Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Option Bays for Expanded Functionality Windows Compatible

General
Compatibility	Not Specified by Manufacturer
Frequency Response	20 Hz to 20 kHz (±0.25 dB)
THD	<0.01% at 1 kHz, +20 dBu
Dynamic Range	>110 dB (20 Hz to 20 kHz) Unweighted
Signal to Noise Ratio	<-90 dBu Unweighted
Inputs / Outputs
Audio I/O	2x Block 6-Pin Line Input 2x Block 6-Pin Line Output
Inputs/Outputs	Input: Active Balanced, 18 Kilohms Input Gain Range: -50 to +12 dB, Selectable Polarity Output: Active Servo Balanced, 112 Ohms Input/Output: Level +20 dBu (Max) Output Gain Range: -50 to +12 dB, Selectable Polarity
Input and Output Connectors	Logic Inputs (Preset Recall): 9-Pin Block 0-5V Remote Level Control: 10-Pin Block Controller Interface: 4-Pin Block
Network	10/100 Ethernet Port RS-232 Port
Wireless
Mobile App Compatible	No
Power
Power Source	AC Input (Included)
AC Input Power	90 to 240 VAC, 50 / 60 Hz
Power Consumption	40 W
Environmental
Environmental Resistance	No
Operating Temperature	40 to 120°F / 4 to 48°C
Physical
Color	Black
Dimensions	19 x 8.5 x 3.5" / 48.3 x 21.6 x 8.9 cm
Weight	12 lb / 5.4 kg

10/100 Ethernet & RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
Mic/line inputs
24-bit A/D–D/A audio resolution
Up to 24 channels of audio processing
4x4 base unit configuration
Expand inputs or outputs 4 channels per module
Modules easily field installable
Euroblock connectors for audio, preset recall, DC remote level control, and data in/out
31 preset locations
Remote controls for level, preset recall, and programmable functions
Third-party control-friendly
Input and output metering viewable in dBu
Multilevel security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
- Advanced gate controls
Gain
EQ:
- 15-band parametric
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

Related Questions and Answers

Q: 1. I am looking at the IOGEAR Wireless 5 x 2 HD Matrix Pro with Three Additional Receivers. Question 1. Is there an option for yet another receiver - five all together? Question 2. Are there other product choices that accomplish the same thing

A: This system is not expandable beyond this kit.

Q: 2. There's no way to bring in a signal via HDMI, scale it, and also bring in a signal via SDI, scale that, and then select which one is output depending on which one I needed to send to a projector for instance is there?Basically, I want to send to MacBook's to an ATEM Television Studio so be switched between them and cameras and displayed on projection screens. My understanding is that I'll have to convert the signal before it gets to the Switcher. So can this Teranex handle 2 inputs, or can it only take one in, convert it, and spit that same one out?

A: You can use the Teranex to scale the two signals, then go to the MacBook next to the switcher via the LAN connection.

Q: 3. Is this product only compatible with iPhone 15 Pro or Pro Max?

A: The Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, is compatible with both the iPhone 15 Pro and iPhone 15 Pro Max.

Q: 4. Does this product support PAL HDMI transmission or only NTSC?

A: It will support NTSC frame rates only.

Q: 5. does this product has a 3C certification for export compliance?

A: The Roland VP-42H is made in Japan (not China) and lists a CAN ICES-3 (B)/NMB-3(B) compliance. https://proav.roland.com/global/products/vp-42h/

Q: 6. It seems you can only record to the iPhone’s storage? Is there any way around to record to an SSD while monitoring on the iPhone

A: At the time of this message, it is not possible to record to an external SSD when using the Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01.

Q: 7. Can the new iPad be used as the monitor ?

A: It's not possible at this time to use the new iPad as a monitor for the Atomos Ninja Phone Video Co-Processor.

Q: 8. Is there a SDI version?

A: At the time of this message, there is no SDI version of the Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01.

Q: 9. Does this allow for preroll like the other recent ninja monitors?

A: The Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, does not have a pre-roll function at the time of this message. Pre-roll is available on the Shogun, Ninja Assassin, Flame and Inferno series monitors.

Q: 10. I am looking at the IOGEAR Wireless 5 x 2 HD Matrix Pro with Three Additional Receivers, are there any other product choices that accomplish the same idea?

A: We do not offer a similar product with the same functionality.

anyonymous	28/09/2024
[Black] i use this mixer for several years, live sound and recording. the preamps are clear, full and detailed. by far the best preamps for the dollar i have ever heart. 5

Kolton	29/08/2024
[40 W] Great, works as expected. 5

Ruess,	28/08/2024
[40 W] Trying to 'down-size' my live keyboard rig. Agonized about whether the 8 speakers would have enough depth to them. They work perfectly for my use (moderate volume band, piano/organ/synth - all sound great). 5

Tim	28/08/2024
[40 W] Nothing in it's price class comes even close. This unit is rock solid, easy to use, and offers great flexibility. It can be used as a delay, crossover, eq, limiters, and many other audio needs. With 4 ins and 8 outs, the setup can be almost endless. You can use outputs 1 & 2 as Master LR, outputs 3 -6 for delay lines, and 7 & 8 as a biamped monitor send. I would definitely spec and install this unit on any of my installations. 5

Kenny	22/08/2024
[Black] Great price for the package! And it got here very fast! Thanks 5

TravisH	07/08/2024
[Black] I use this product in our committee rooms, legislative house, and senate chambers. It is very easy to add and network together for the perfect control. It would be nice to have a web connect feature for internet remote access control (hint, hint). 5

Edward	25/06/2024
[40 W] For a little background, I have owned a K10, a KW122, and a KSub. Our GB band owns many QSC speakers, as well, including the K8, K10, K12, KW152, and KW181. I am a guitarist and bassist and sometimes run a pre-amp into the K-series speakers directly for lower volume situations. The original K8 has always been my favorite for acoustic guitar and I have used one many times to perform outdoor wedding ceremonies. The wide dispersion pattern and detailed midrange sits nicely with acoustic instruments. The K8.2, to me, almost sounds like the original K10 in regards to depth of sound while retaining the wider dispersion of the 8" driver. It puts out a lot of quality sound in a small form factor. I'm sure many of us are happy that the K8.2 also has the ability to be used as a floor monitor, too, which is another application I will be using mine for. The new onboard DSP, while not as quick to navigate as the analog dip switches of the original K-series, adds lots of functionality. Most notable for instrumentalists is the addition of the high impedance input setting on channel B. Combined with the onboard EQ and three different high pass filter settings, you can skip using a pre-amp and plug straight in, if a simplified setup is needed. I plan on using it this way for playing lower volume cocktail hour duo scenarios. Also, thank you B&H for offering this speaker with the carrying bag included. It made it easy to decide where to purchase it! 5

Christopher	03/06/2024
[40 W] A fantastic kit — Powerful little speakers. Light enough to easily carry them around, and good-quality hardware to connect them. I definitely recommend a subwoofer for these. 5

Paul	21/05/2024
[40 W] I have an original K10 and the addition of the K8.2 is very welcome. the K8.2 delivers great balance between brilliant highs and tight, round low end with a nice punch of power. all in a small user friendly package. 5