Designed for studio or light-duty stage applications, the Kali Audio WS-12 V2 is an active 12" subwoofer, well suited for recording studios, broadcast environments, film mixing, and small stage setups. The WS-12 V2 utilizes a 1000W Class-D amplifier to power the woofer, which is capable of a frequency response of 30 to 180 Hz at ±3 dB and a maximum SPL of 123 dB.

The WS-12 excels at reproducing film soundtracks and bass-heavy music like EDM and hip-hop. The front-firing port tube is designed to ensure that all the air leaves the port tube at the same velocity, preventing turbulent chuffing while creating a tight, clean bass tone that is devoid of noise.

The rear panel offers several DIP switches for setting crossover settings, gain controls, and polarity. Two combo XLR-1/4" inputs and two XLR outputs allow for flexibility when deploying in the studio or onstage. Additionally, there are a pair of RCA inputs, which are defeatable via DIP-switch settings. A universal power supply allows the WS-12 to be used anywhere in the world with the flip of a switch. The Kali Audio WS-12 V2 ships with a power cord.

12" Woofer    1000W Class-D Amplifier    Low-Noise Port Tube    User Selectable Crossover and Polarity    30 to 180 Hz Frequency Response ( ±3 dB)    123 dB Maximum SPL    Two Combo XLR-1/4" Inputs + Stereo RCA    Two XLR Outputs    1/4" Footswitch for Bypass    Includes Power Cord

• 12" woofer
• Class-D 1000W amplifier
• 23 to 180 Hz frequency range
• User selectable crossovers
• 123 dB maximum SPL
• Combo XLR-1/4" inputs + stereo RCA
• Two XLR outputs 
• 1/4" foot switch
• M20 threaded pole cup for speaker pole

Related Questions and Answers

Q: 1. Are they plug and play (for a Dell laptop)? Thx

A: Yes, the Creative Labs Pebble V2 USB Type-C Powered Desktop Speakers are plug and play.

Q: 2. What is the diameter of the cross bar?

A: Cross bar is 1 diameter. This stand works great with our backdrop.

Q: 3. What is the measurements of circumference and diameter of the base?

A: Not sure. We use a green screen fabric that was 24 by 10 but turned sideways. The crossbar sagged so we returned it. Built a custom support fixed to the wall.

Q: 4. Can I pair two of these (one on each speaker) to one transmitting signal?

A: NoJust like any other Bluetooth productCan only match one at a time

Q: 5. What is the battery runtime for the PA speaker and runtime for the microphones?

A: Pyle does not specify but typically around 3-4 hrs of normal use.

Q: 6. I was wondering if you can put a boom arm on this structure to hang a hair light over head from the structure and use the background support at the same time?

A: Unfortunately, using a boom on this background stand while a background is attached would render it unsafe.

Q: 7. Is it pure sinewave?

A: No, the Wagan 3720 SlimLine 1000W 12 VDC to 115 VAC Power Inverter provides a modified sine wave output of 1,000 Watts.

Q: 8. why these speaker only have audio inputs and no outputs? should get a split connector to reach both speakers? Avante Audio Achromic AS8 1000W Column PA System

A: In addition to its audio inputs, the Avante Audio Achromic AS8 1000W Column PA System also features an XLR 3-Pin Male Balanced/Unbalanced Line Output connection for sending signal to externally connected speakers.

Q: 9. Is this sturdy enough to hold a 107 x 36 seamless paper background roll?

A: Depends on the grain and density of your paper, but this system is extremely sturdy and balanced so I would say yes! (Note: I useCloth based backdrop, not paper)

Q: 10. Will The saramonic xm1 Windproof fit My saramonic blink500 b6 mic?

A: No, the Saramonic XM1-WS Furry Windscreen is only meant to work with the SmartMic and SR-XM1 microphones.