Hdmi Extender Over Twisted Pair With Power Control

Product Code: eq14337
Availability: In Stock

$1,192.11 $1,907.38

Qty

8 reviews Write a review

Description
Reviews (8)

The HDMI Extender over Twisted Pair with Power Controlis a transmitter and receiver set that allows you to transmit a HDMI signal, bidirectional IR control, and RS-232 control up to 230' over a single Cat 6 or greater cable. It supports resolutions up to 1080p and 4K, and 3D video. 4K can be transmitted up to 131'.

Only one power supply is required, connected at either the transmitter or receiver end, as one unit will transmit power to the other. An 18V power supply with a screw-on connector is included. Two IR emitter cables, two IR receiver cables, and two pairs of mounting brackets are also included. The individual transmitter and receiver units are not compatible with other HDBaseT devices due to proprietary PoE circuitry.

Transmits HDMI/IR/RS-232 230' via Cat 6 Supports up to 1080p / 4K, and 3D Video Only One Power Supply Required Screw-On Power Supply Included Bidirectional IR and RS-232 Pass-Through Built-In Surge Protection CEC Supported HDCP Compliant Includes Two IR Emitters / Receivers Includes L Mounting Brackets

Parameters
Input / Output	Transmitter: 1x HDMI type A input 1x Shielded RJ45 output, 8P8C 1x IR emitter port, 3.5 mm TRS jack 1x IR receiver port, 3.5 mm TRS jack 1x RS-232 port, 3-Pole Euroblock connector 1x Locking DC power port, 5.5 mm outside diameter / 2.1 mm inside diameter Receiver: 1x HDMI type A output 1x Shielded RJ45 input, 8P8C 1x IR emitter port, 3.5 mm TRS jack 1x IR receiver port, 3.5 mm TRS jack 1x RS-232 port, 3-Pole Euroblock connector 1x Locking DC power port, 5.5 mm outside diameter / 2.1 mm inside diameter
Maximum Distance	Over Cat6: 197 ft (60 m): Deep Color 36/30/24 bit at 1080p 115 ft (35 m): Deep Color 48 bit at 1080p, 3D, and 4K x 2K Over Cat6 or greater with shielded connectors: 230 ft (70 m): Deep Color 36/30/24 bit at 1080p 131 ft (40 m): Deep Color 48 bit at 1080p, 3D, and 4K x 2K Maximum HDMI Distance:16 ft (5 m)
Compliance	HDMI, HDCP, and CEC
Embedded Audio	Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal	5.0 V p-p (TTL)
Input Video Signal	0.5 - 1 V p-p
IR Frequency Range	33-55 kHz at 5 V
RS-232 Baud Rate	Up to 115200 baud
HDBaseT Signal Characteristics	Maximum Distance: 230 ft (70 m) Cable Requirements: Solid core Cat6 or 6A with TIA/EIA-568B crimp pattern Bandwidth: 10.2 Gbps Gain: 0 dB - 10 dB at 100 MHz Resolution Range: 800 x 600 - 1920 x 1200 Signal to Noise Ratio (SNR): > 70 dB at 100 MHz over 328 ft (100 m) Return Loss: < -30 dB at 5 KHz Total Harmonic Distortion (THD): < 0.005% at 1 KHz Min-Max Signal Level: < 0.3 - 1.45 V p-p Differential Phase Error: ±10° at 135 MHz over 328 ft (100 m)
Housing	Painted steel
Maximum Power Consumption	Transmitter: 3 W; Receiver: 6 W
Power Supply	18 V DC
ESD Protection	15 kV
Regulatory	CE, RoHS
Operating Temperature	Environment: 32 to 104°F (0 to 40°C) Chassis: 88°F (31°C) (Transmitter); 100°F (38°C) (Receiver)
Storage Temperature	Environment: 14 to 140°F (-10 to 60°C)
Operating Humidity	Environment: 20 to 90%, non-condensing
Storage Humidity	Environment: 20 to 90%, non-condensing
Dimensions	5.3 x 2.9 x 0.6" (13.5 x 7.4 x 1.5 cm)
Weight	Approx.1 lb total (Approx. 0.45 kg)
Packaging Info
Package Weight	1.755 lb
Box Dimensions (LxWxH)	9.05 x 6.55 x 2.2"

HDMI transmission up to 230' over Cat 6 or greater cable

Supports 1080p, 4K x 2K, and 3D video

Bidirectional Wideband IR and RS-232 pass-through

Power supply required only on one end

CEC supported

Built-in surge protection

Power, Status, Link, and HDCP diagnostic LEDs

HDCP compliant

Locking power connector included

Also includes two IR emitters/receivers and two sets of mounting brackets

Related Questions and Answers

Q: 1. Please, how many units can be attached in daisy chain?

A: In theory, until you run into a device that no longer meets the HDCP negotiation or until you run out of keys to negotiate. That said, there is a limit to how much distance you'll get on a particular type of cable. For the most distance, you need shielded cat6 or better.

Q: 2. What type of power supply is shipped with the device? Is is a normal DC wall pack, or is it the PS-1202?

A: It is a wall-wart style DC power adapter.

Q: 3. Do both (transmitter and receiver) need power ? or ONLY one of them?

A: Yes, both the transmitter and receiver will need to be powered. It will come with 2 AC power supplies.

Q: 4. Will this work with another brand of transmitter? In other words, are there different protocols or a standard one for converting signals?

A: Sorry, but the Kramer HDMI over Twisted Pair Receiver B&H # KRPT572P can only be used with a dkgat product like the VM-114H4C, VM-1H4C or pt-571.

Q: 5. Can I have multiple receivers? I have one source that I would like to display on 3 different displays in 3 different locations.

A: Yes, one can work with up to 8 receivers, with capability to send the same source to multiple receivers.

Q: 6. Would i need the receiver if i have a device that supports HDBT?

A: No, the Kramer PT-571 HDMI over Twisted Pair Transmitter will allow you to output HDBT signals directly to the device you are using that has HDBT input. You do not need a receiver.

Q: 7. Can you have multiple transmitters on the same network and flip between sources?

A: There are no controls on the receiver so no way to flip between sources. The transmitters do multicast across the whole network so the best way to do what you want (with these boxes) would be to set up separate physical networks or create virtual LANs to separate the various transmitters. A receiver's port would need to be assigned to a particular VLAN to receive the signal from the transmitter on that VLAN.

Q: 8. Can I have the model number of the correct receiver to pair 3 more TV's to this unit ?

A: The Ocean Matrix HDMI Over IP Extender / Converter (BH # OCOMXHDMI2IP) will use this receiver: Ocean Matrix OMX-HDMI-2-IP-R HDMI over IP Extender Receiver (B&H # OCOMXHDMIIPR) 1080p HDMI Signal Extender Transmits up to 393' with Cat 6 Cable HDCP Compliant Takes Advantage of Existing Wiring Supports Multichannel Audio

Q: 9. what is the max resolution that this will support?

A: This for HDMI, I.E 1080p.

Q: 10. Does this support 1920x1200?

A: Yes, the Kramer HDMI over Twisted Pair Receiver supports 1920x1200.

Randy	03/09/2024
[18 V DC] My rating on this piece of equipment It is as follows. It performs above and beyond what I could imagine, easy to set up great quality! The service from B&H Photo sales staff was awesome as well I cannot recommend this more highly. I have a total of 4 of these units and they all work perfectly Kramer is awesome with their service and support as well. 5

Woodrow	01/09/2024
[5.0 V p-p (TTL)] Used in a church sanctuary to send HDMI long distances and does it job. The green/orange/red indicator is very handy as well as the surface mounting hardware. 5

Tom	26/08/2024
[Painted steel] I'm using 571/572s for video, with audio going to mixer and house speakers. Video and audio are not in synch. Presonix mixer has no function to delay audio. Help, anyone? 5

MACDdaddy	14/07/2024
[Painted steel] We needed this for a church set up. We are running a video camera and to get the HDMI signal back to the booth we tried these out. Our church also uses a rec/tran pair to get HDMI up to our projector. Kramer makes good sturdy products this is no exception. This is the Receiver you do need to purchase the Transmitter PT-571 to make a pair. Both come with a power supply you only need to power one end. This did work just fine with a pre-made 100 foot cat5 cable. If I was going longer distance I would make sure to use cat6 cable. Good Luck... Rob 5

Patrick	05/06/2024
[Painted steel] Easy to install. Little to no maintenance needed on these 5

ahinesobc	11/05/2024
[18 V DC] Need to send video beyond the limits of HDMI? Look no further... This hardware just works. 5

Jon	14/04/2024
[18 V DC] These little pico tools from Kramer are an excellent solution at a good price point. Using these with 572 receivers and a Kramer 2x4 HDMI distro on the front end to send presentations to three screens over 100' of qualified (Kramer uniKat) CAT6 cable. It just works. No latency, no glitching, no resolution limits up to and including 1920 x 1080. Rack amount accessories make for a clean, manageable installation. The 572 receivers get power over ethernet, so no wall wart required at the receiver end. 5

ahinesobc	12/04/2024
[Painted steel] Need to send video over distances greater than the limits of HDMI? Look no further... just make sure you buy it with the transmitter. 5