Turn your modular system into a self-contained music machine with the Tiptop Audio HATS808, a Eurorack module featuring the original 808 analog closed hi-hat and open hi-hat sound engines. The module contains both circuits and features the original choke circuit for realistic performance.

Special features for each voice include independent accent levels, a high-powered gain stage, and dual-input pulse-shaper. Filter Q and VC-Q knobs were added to the main band-pass filter for additional tuning and to allow you to generate crushed tones and self-oscillation at the knob's max position, all without compromising the signature sound of the TR-808 hi-hat. The module ships with a ribbon power cable.

Original TR-808 Analog Hi-Hat Circuits    Independent Open and Closed Hi-Hat Voice    Two Sets of Gate + Accent Trigger Inputs    Separate Outputs for Open and Closed    Level, Decay, and Accent Controls    Resonance (Q) Knob + CV Input    Bandpass Output    Includes Ribbon Power Cable

• Real analog closed and open hi-hat circuits from the TR-808
• Adapted for use in Eurorack modular synthesizer format
• Independent accent levels
• High-powered gain stage
• Dual input pulse-shaper
• Filter Q and VC-Q knobs were added to the main bandpass filter for additional tuning and to allow you to generate crushed tones and self-oscillation at the knob’s max position

HATS808 is a one-to-one clone of the original circuit found in Roland's TR-808 drum machine. The noise source in HATS808 is made of a mix of six analog square wave oscillators set at specific frequencies. During the design, Tiptop measured the frequency of those oscillators in several original machines and found large differences; that wasn't much of a surprise as these oscillators are made using very primitive methods with no scaling or temperature compensation. As with all the other modules in this series, the guide has been the original schematic.

• The choke function is a clever interaction between the two hats that adds a feel of dynamics and movement to your groove. It is an original part of the TR-808 circuit and is fully implemented in the HATS808. The idea is simple: if both sounds (CH and OH) are triggered at the same time, the short envelope of the CH will be forced on the internal VCA of the OH. In that scenario, what you will be hearing is a short CH from both outputs
• The nice thing about the choke is when a CH will be trigger after a long decayed OH, the CH envelope will choke (mute) the long decay of the OH and will give this great effect of interaction between the two hats
• Using the choke function with accents can produce great rhythms

• 4 HP Eurorack format module
• Maximum depth: 0.6" (14mm)
• Includes power ribbon cable with Eurorack power headers
• Power consumption: +12V: 30mA, -12V: 25mA

Related Questions and Answers

Q: 1. Is there a board I can buy that will turn this into a hi-hat? It would need to have a 3/8ths stud in the middle

A: Ikan does not have a board option for their IK-RSR6 riser. Other solutions with a board are - Proaim Heavy-Duty Cinema Hi-Hat with Octagonal Board (75mm) BH #PRHTBWL7500

Q: 2. Is there a version of this with a flight case?

A: We think you are thinking of these dollies. However, in order for them to fit in a reasonable case, they do not incorporate a high hat. https://bhpho.to/2kitBVS

Q: 3. Can the legs be inverted so that the bowl mount faces the floor?

A: Not that we are aware of. This system will not work in that way.

Q: 4. Can you lay the tracks on the ground without using stands?

A: Yes, the dolly track holders can sit on the ground.

Q: 5. Does it work with the Sachtler Aktiv12 fluid head?

A: Yes, the Manfrotto 529 Hi Hat with 100mm Bowl is compatible with the Sachtler aktiv12T Touch & Go Fluid Head with SpeedLevel & 7-Step Drag (100mm).

Q: 6. can that Reverse setup when wanna low angle?

A: For a low angle, you would want to use a shorter stand, such as a set of Avenger Combo Steel Stand 10s: https://www.bhphotovideo.com/c/product/611470-REG/Avenger_A1010CS_A1010CS_Ultra_Low_Boy.html/specs

Q: 7. Are there mounting holes for a Mounting Board?

A: Yes. If you rotate the red feet there is a hole.

Q: 8. Does B&H offer a case for this item? Doesn't have to be for flight/carry-on purposes.

A: Hi. Unfortunately at this time, we do not include a case with the kit.

Q: 9. What are the dimensions at the widest point? 4.7"?

A: Yes, this product is widest at 4.7 inches.

Q: 10. What's the weight capacity?

A: The manufacturer does not list a weight capacity anywhere. However, the ikan IK-RSR6 will be able to support more weight than any tripod head you fix onto the riser.