Route, split, and combine multiple signals simultaneously with the 4ms Passive Mult Kit, a do-it-yourself Eurorack module that features two 1-to-3 mults or one single-channel / normalized 1-to-6 configuration. The module is passive and requires no power. The device can also be used as a 3-to-1 or 6-to-1 mixer. The Buffered Mult Kit includes all the components needed to complete the module as well as a silver/black panel.

Full DIY Kit    Beginner Level Built    Two Channel Mult    Dual 1-to-3 Mult    Single Channel/Normalized 1-to-6 Mult    Use as 3-to-1 Mixer or 6-to-1 Mixer    Includes All Kit Components

• Includes all the parts necessary to build a full-featured Passive Mult
• Advanced-Level Kit: Soldering proficiency required
• Tools Needed (Not Included):
  • Soldering iron, solder
  • Flush snips
  • Needlenose pliers (for removing a component if you make a mistake)
  • 5/16" and 3/8” socket driver (optional: pliers work if you're careful)
  • Multimeter (for reading resistor values if you don't know the resistor color-code chart)

• Two Channel Multiple: It can behave as a dual one-to-three mult, or a single channel / normalized one-to-six mult
• Passive design can also be used as a three-to-one or six-to-one mixer

Related Questions and Answers

Q: 1. Does this work with PROFOTO B10 PLUS?

A: No, you can not trigger the Profoto B10 flash head from Sekonic Speedmaster L-858D-U Light Meter or control the flash exposure. Sekonic only makes this lightmeter with modules for Broncolor, Godox, Elinchrom, Phottix, and PocketWizard. YOu will need the Air remote for Profoto B-10.

Q: 2. is this compatible with Fugi x100s camera? i would like to use it on top of fuji x100s to fire my Nikon sb900 manually by using PC cord

A: Yes, this shoe is compatible with the Fuji X100s camera in manual mode only. It would allow you to connect your Nikon SB900 to it via pc-sync cable and fire it in manual mode.

Q: 3. Does this have a filtration compensation mode?

A: The meter does have a filter compensation mode for exposure only. Click on the link below and see page 127 of the manual for the details of this function. https://static.bhphotovideo.com/lit_files/474654.pdf

Q: 4. Is there an adapter for round flash units like Godox V1?

A: Unfortunately, this kit is limited to standard shoe mount flashes with a rectangular head.

Q: 5. Can I use this to mount my old vivitar zoom thyristor 3500 flash unit on and connect it to the MIOPS sound trigger or NERO sound trigger?

A: Yes, this hot shoe will work.

Q: 6. Can the pc port be used for signal input to trigger the hotshoe?

A: No, the PC port is for outpiut of signal, not to "trigger the hotshoe"

Q: 7. Where can I buy the magnetic adapter?

A: Please see attached link for BH #HAHLM600CL • MFR #HL-MODULE-600CLAMP and for B&H # HAHLM360CL MFR # HL-MODULE-360CLAMP 360: https://bhpho.to/3oeaGuS 600: https://bhpho.to/3pN8Scv

Q: 8. What is the difference between Sekonic Speedmaster L-858D-U and Sekonic Speedmaster L-858D?

A: Both models are the same. The U designation refers to the meter being sold within the US marketplace.

Q: 9. Can I use it on a Panasonic G7 to mount a Canon Speedlight over the adapter (to work in Manual mode)?I'm concerned because the adapter has not only (on top) a contact in the center to trigger the glash, but also a surrounding metal that would make short-circuit the contacts of the Canon Speedlight, and I don't know if that could damage my Speedlight..Thank you!

A: I am not familiar with Panasonic, but I use these in manual mode with Canon 580 speedlites connected to Pocket Wizard radio triggers. I have had no problems at all using the 580s with umbrellas on light stands.

Q: 10. Does this item do hotshoe-to-hotshoe triggering? I’d like to use it as a way to blank off the dedicated TTL contacts on a flash trigger.

A: Yes, this would do hotshoe to hotshoe triggering and block off TTL reading.