The DisplayPort to DVI Active Adapter - IPGardfrom DisplayPort to DVI Active Adapter - IPGardhelps you connect your DVI monitors or computers to other devices with DisplayPort connections. With support for 1920 x 1200 (WUXGA) resolution, you can connect monitors, projectors, streaming setups, and more with full HD video support. Thanks to a latching DisplayPort connector and screw-capable DVI connector, your devices will be connected securely for extra peace of mind.

Please note that since it has a female DVI connection, you will need an additional cable.

Latching DisplayPort Male Connector    DVI Female Connector    Supports Resolutions up to 1920 x 1200

Related Questions and Answers

Q: 1. Does it come with at least one stereo mini cable, and other stuff like adapters? Cause there's nothing about that in the whats in the box , but if you see packaging pictures in the internet, you will see those things in the box.Thanks

A: The Beachtek DXA-Micro Pro ships with two 3.5mm (1/8 ) stereo cables for connection to/from a camera.

Q: 2. I'd like to use this with my Sony a6300 which has a 3.5 mic input, but no headphone/line out. Will I be able to monitor sound while recording? Also, will I need a line to microphone attenuation cable or does this feature mic out?

A: This audio adapter will allow you to monitor the audio before it goes out to your camera. The output level is set to MIC Level, and a 3.5mm cable is provided to connect to your camera.

Q: 3. How do I use the meters on the unit when I am likely more interested to go by the meters on the DSLR where the recoding is being made? I guess I am confused at to their role.

A: The meter display onboard the Beachtek DXA-MAX 2-Channel Active Audio Adapter for DSLR shows levels at one stage of the audio signal chain. These are useful to confirm that the signal coming into the Beachtek is adequate and not clipping before sending down the chain to the next stage in the camera for further monitoring and adjustment if needed.

Q: 4. Would this work with a wire lav microphone that doesn't have power?

A: Yes, I bought it because I do a lot of video in my leadership training and most of the mic's that work with camcorders do not have power. The unit provides power from batteries and I use it with a string of 8 table mic's and it works great. You will need a wire from the lav to the unit.

Q: 5. Can this be used with Nikon Z8 camera?

A: Yes, the Beachtek DXA-MAX 2-Channel Active Audio Adapter for DSLR can be used with any camera that has a 3.5mm microphone input jack.

Q: 6. Does your DSLR have to have an audio output to be able to monitor audio with this device? I have a Nikon D5300.

A: You can monitor the audio on the Beachtek as it is going to the camera. You wont be able to monitor the audio that is being recorded though as the camera does not have a headphone port.

Q: 7. am I able to use 3 labs with beachtech?

A: You can use up to 2 lavalier mics with the Beachtek DXA-MAX.

Q: 8. Does the battery power LED indicate when the internal battery is low by turning red or something?

A: Yes it will glow red/orange when the battery level is low.

Q: 9. what is the phone port for?

A: When you see the word "Phones" in audio recorder or mixers that's your headphone output.

Q: 10. Will this provide plug in power not phantom power for lav mic

A: Yes, according to the operating manual i downloaded and printed this provides 3.5 volts on all mini-jack mic inputs.