Dynotech Cat 6 Utp Cmr Ethernet Cable 1000Ft Black

Dynotech Cat 6 Utp Cmr Ethernet Cable 1000ft Black

Product Code: eq144081
Availability: In Stock

$524.85 $834.51

Qty

11 reviews Write a review

Description
Reviews (11)

Complete your home, office, or business network installation with the 1000' Dynotech Cat 6 UTP CMR Ethernet Cable 1000ft Blackfrom Dynotech. This black Cat 6 cable features CMR-rated fire resistance for riser installation between floors.

Inside the PVC jacket is a bare copper conductor with an unshielded twisted pair construction that supports up to a 550 MHz, 10 Gb/s throughput. Additionally, this 23 AWG cable has a built-in rip cord that allows you to strip the jacket for easy installations.

Cat 6 Cable Unshielded Twisted Pair Bare Copper Conductor 23 AWG PVC Jacket Up to 10 GB/s Throughput 550 MHz Bandwidth CMR Rated Built-In Rip Cord ETL Verified

Key Specs
Cable Length	1000' / 304.8 m
Ethernet Standards	Cat 6
General
Cable Length	1000' / 304.8 m
Ethernet Standards	Cat 6
Compatibility	10GbE
Electrical
Bandwidth Rating	550 MHz
Physical
Shielded	No
Cable Configuration	Solid
Boot Type	No
Outer Diameter	0.02" / 0.53 mm
Wire Gauge	23 AWG
Jacket Type	Polyvinyl Chloride (PVC)
Conductor	Copper
Contact Plating	No
Packaging Info
Package Weight	25.67 lb
Box Dimensions (LxWxH)	16.6 x 15.6 x 11.8"

Related Questions and Answers

Q: 1. Will this drive work with a SABRENT USB 3.0 SATA I/II/III bay?

A: You can use this Ironwolf drive in a Sabrent 3.5" enclosure BH #SAECKSL3.

Q: 2. Will this fit the rode videomic ntg?

A: Rode recommends: Rode Fur Windshield for VideoMic NTG Mic B&H # ROWS11 The Rode Dead Cat Wind Muff for VideoMic, NTG1 and NTG2 Microphones BH #RODC will fit, but rather loosely.

Q: 3. I'm assuming 18TB IronWolf Pro is compatible with QNAP TVS-872XT?

A: Yes, this 18TB would be combatable with the QNAP TVS-872XT

Q: 4. Hey there, is this compatible with OWC Drive Dock? https://www.bhphotovideo.com/c/product/1288284-REG/owc_other_world_computing_

A: While the Seagate 16TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, OEM) could be mounted in the OWC Drive Dock, it is a NAS drive intended to be used in a NAS, so it is not meant to be used as direct attached storage, and is not a HDD we would recommend. I'd recommend using the Seagate 16TB Exos X16 7200 rpm SATA III 3.5" Internal HDD instead. See: https://bhpho.to/2OW26Uj

Q: 5. can usb-c be used?

A: No, these only work via a Thunderbolt 3 bus.

Q: 6. I intend to hook up 4 of these as part of a RAID 0 array to boost performance speeds while doing photo editing and graphics intensive work. Is this ideal for RAID 0, or are they better options out there? WD Black or Seagate Barracuda Pro perhaps?

A: The Seagate 6TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (Retail) BH #SEST6000N000 is a good option for a RAID array and although they are designed as NAS drives, they would work in a desktop environment just as well. The Barracuda Pro and WD Black would also be good options and designed specifically for desktop use.

Q: 7. Does this adapter require extra drivers to be used with Linux?

A: It is possible considering all of the distributions available.

Q: 8. Will my Imac read this external device, it being 20TB?

A: The Seagate 20TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD (CMR) BH #SEST20000NE0 is an internal drive, not external. If you buy an external enclosure for 3.5'' SATA HDD like the Oyen Digital Novus USB Type-C Rugged 3.5" HDD Enclosure BH #OY3N1CBL then you can use it externally with an iMac.

Q: 9. Is this Rode Dead Cat compatible with The Sennheiser MKE 600 shotgun mic?

A: This will fit the Sennheiser MKE600 as well.

Q: 10. Will these drives work in a SanDisk Professional G-RAID?

A: Yes, you can use the Seagate 20TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, Retail, 2-Pack) in a SanDisk Professional G-RAID.

Sean	04/09/2024
[25.67 lb] This is quality cable! Solid twisted pairs, notable difference from the typical riser cable purchased at big store names. I would buy again without hesitation.Good cable. 5

Frank	28/07/2024
[25.67 lb] Really reminded me of the Apple cables. It's great for connecting a smart home hub to a switch, and I love that the ends are flexible. 5

Warren	27/07/2024
[Solid] I hooked this up from my computer to a DLP projector via 2 VGA adapters (no auxiliary power)and it works like a champ 35 feet away. Best price on a great product. 5

Mehul	12/07/2024
[25.67 lb] B & H is the place to buy. Thank you. 5

Eduardo	09/07/2024
[23 AWG] very good product, good price 5

Eduardo	05/07/2024
[10GbE] very good cable 5

paul	29/06/2024
[10GbE] It was my first time running network cable through my house. This cable is tough and easy to snake through walls and crawlspaces. It's very durable and we didn't have any trouble with snags in the box or anything. The twists in the bundle are easy to create network connections for either A or B modes. I never terminated cat6 cables in my life and I was able to untwist and terminate b mode ends with no issues. I highly recommend this product to anyone looking to create or upgrade a network that needs cat6. 5

Dr H	14/06/2024
[Cat 6] We ordered this cable for communications in the office. The product is as advertised. Price was very good when comparing. 5

Jonathan	02/05/2024
[25.67 lb] We used this cable and have found it to work perfectly for all the cables we have made thus far. 5

Jerry	24/04/2024
[25.67 lb] I have been using Ubiquti UNIFI networking hardware for about three years and have had no issues with the equipment. I have found their products to be dependable, reliable, and secure for my in home network. The 8.6 in patch cable is used to connect the UDM Pro to my USW 16 POE port to port for the internet uplink. I would recommend this product. 5