Hollyland Rotatable Cold Shoe Adapter For Wireless Unit

Product Code: eq144243
Availability: In Stock

$44.97 $56.21

Qty

18 reviews Write a review

Description
Reviews (18)

Mount your transmitter or receiver onto a cage or camera shoe mount with this Hollyland Rotatable Cold Shoe Adapter for Wireless Unitfrom Hollyland. This adjustable mount easily attaches to your camera, cage, or rig shoe mount using a cold shoe adapter. It rotates and tilts, and it is lockable in any position to establish the best possible viewing angle.

Rotating and Tilting Monitor Mount Adjust Tightness on Each Axis For Wireless Transmitter or Receiver Lockable in Any Position

Key Specs
Mounting	Receiver/Transmitter Mount: 1x Built-In 1/4"-20 Male Screw, 1x Built-In Cold Shoe
Mounting
Mounting	Receiver/Transmitter Mount: 1x Built-In 1/4"-20 Male Screw, 1x Built-In Cold Shoe
Packaging Info
Package Weight	0.14 lb
Box Dimensions (LxWxH)	2.5 x 2.45 x 1.45"

Hollyland wireless transmitters or receivers such as the Pyro H or Bolt

Related Questions and Answers

Q: 1. Hi, Do you get preview and program tally lights when using it with the Atem Mini Pro iso? Thanks

A: The Hollyland Wireless Tally System (4 Tally Lights) would be able to receive preview and program tally signals when connected to the Blackmagic Design ATEM Mini Pro ISO HDMI Live Stream Switcher via RJ45. You would need to setup that tally signal in the Blackmagic ATEM software.

Q: 2. Does this work with NewTek TriCaster TC1 or TC1 Pro NDI Switchers?

A: Hollyland does not state that the Hollyland Wireless Tally System (4 Tally Lights) is compatible with the Vizrt TriCaster TC1 (2 RU) or the Vizrt TriCaster TC1 Pro (2 RU) at this time. You can find the list of compatible switchers here: https://bhpho.to/4gasEK2.

Q: 3. Can this fit on any cold shoe or even the hot shoe on the Pocket 4K itself?

A: Yes. The following unit will adapt top any standard hotshoe but the pocket only offers a 1/4 thread opening. for the pocket 4k the following will be needed in order to properly attach the holder unit SmallRig Full Cage for Blackmagic Pocket Cinema Camera 6K/4K BH #SM2203B • MFR #2203B https://bhpho.to/3BgrKb4

Q: 4. How do I get this to go on my 90 d

A: This is a cold shoe handle. It would connect to a camera as shown in this photo on our website. https://bit.ly/33THIHj

Q: 5. Is this an updated version of BH #MA492LCD or is it different?

A: Yes, the Manfrotto 492 LCD Micro Ball Head with Cold Shoe is very similar but it includes a cold shoe at the bottom to mount directly to camera shoes.

Q: 6. How to tighten the umbrella as i don't see the knob?

A: You are correct, the Sunwayfoto CB-06 Cold Shoe Adapter with Arca-Type Base does not have a knob for the umbrella 8mm mount. When using an umbrella is secured by friction only. Adding some gaffer tape around the umbrella shaft might fix it. ProTapes Pro Gaffer Tape (2" x 55 yd, Black) BH #PRGT255B

Q: 7. Will this work on the original Smooth Q gimbal?

A: This is for the Smooth 4, we are not aware of it fitting the Smooth Q. Instead we recommend the DigitalFoto Solution Limited Universal L-Bracket with Cold Shoe Mount for Single-Handle Gimbal, BH #DIM0667II. https://bhpho.to/2JuR7iB

Q: 8. Can the rod in this SSD holder be replaced with a longer one and is it a 15mm?

A: This has a 15mm rod mount, not the rod itself. You will be able to use any number of different length 15mm Rods with it.

Q: 9. Hi. Will it work in Crane S3?

A: The Ulanzi PT-3 Triple Cold Shoe Extension Bracket is meant for small handheld gimbals.

Q: 10. Does this work w/ Osmo mobile 4?

A: Yes, the UURig Dual Cold Shoe Bracket for DJI Osmo Mobile 3is also compatible with the DJI OM 4 SE Smartphone Gimbal.

David	24/09/2024
[0.14 lb] This is another high quality product by Bracket 1.� The machining is perfect, resulting in a great fit of the nuts on the threaded post.� Does not bind, no slop in the threads and stays tight once you tighten it!� If you're going to mount something heavy (this high strength piece can take the weight) make sure you mount it in a solid shoe on your camera.� Some of the camera shoes that are mounted on the plastic part of the camera can work their way loose if you put a heavy load on them.� They have other accessory brackets available for heavier accessories and this Threaded Adapter will work with them too. 5

Micheal	21/09/2024
[0.14 lb] Works as they should, not too much to do here with these except stay tight and that they do!! 5

Mahwah Guy	15/09/2024
[0.14 lb] Pop your Speedlight onto a tripod or light stand. It'll improve your photographer 100%. 5

Jeff	15/09/2024
[0.14 lb] Attached RODE VideoMic Pro on Joby, plugged into the Sony A6400 for local record. 5

Kevin K.	11/09/2024
[0.14 lb] Perfect for mounting stuff on camera like a monitor or audio recorder. 5

Canon sl1	03/09/2024
[0.14 lb] I really love this product, i use it to shoot video with my GoPro while I shoot with my Canon dslr! Locks down well and i feel like my equipment is safe. Excellent buy! 5

David W.	01/08/2024
[0.14 lb] Does exactly what you think it does. Build quality seems good over time. Best price for this type of item. 5

Shahil	29/07/2024
[0.14 lb] It does its job and that too very well enough. 5

Brian	25/07/2024
[0.14 lb] Holding up , so far so good 5

Charles	12/07/2024
[0.14 lb] When you need to keep a $2000 Q7 locked securely to your rig there is only one way to do it... used a strong Adapter... Just what we needed! 5