Expand your business's Wi-Fi coverage with the EnGenius EWS276-FIT Wireless Dual-Band Indoor Wi-Fi 6 Access Point. This Wi-Fi 6 (802.11ax) access point is designed to deliver up to 3548 Mb/s data throughput over the 2.4 GHz and 5 GHz bands with compatible devices, providing you with the wireless bandwidth to stream video, browse webpages, and more. OFDMA and 4x4 MU-MIMO technologies provide smooth, efficient connections to up to 250 concurrent devices.

You may power the EWS276-FIT by connecting its 2.5G Ethernet port to a PoE+ compatible network device or using a separately purchased power adapter. Your wireless network is protected by WPA3 encryption. Additionally, you can configure the access point through an easy-to-use web interface via the cloud or with on-premises management options based on network architecture, administrative permissions, and technical aptitude.

Wi-Fi 6 (802.11ax)    Up to 3548 Mb/s Throughput    2.4 GHz / 5 GHz (Dual-Band)    1 x 2.5G Ethernet PoE+ Port    8 x 5 dBi Internal Antennas    4x4 MU-MIMO & OFDMA Technologies    WPA3 Security

Related Questions and Answers

Q: 1. Can I use a PoE Injector to power this AP?

A: Yes, the Ubiquiti Networks UniFi U6 Enterprise Wi-Fi 6E Tri-Band Access Point can be powered via PoE injector. The Ubiquiti Networks U-POE-AT PoE+ Adapter (BH #UBUPOEAT • MFR #U-POE-AT) is the recommended injector to use as a power supply for the U6 Enterprise AP.

Q: 2. We installed one unit in the guest bedroom and the neon glows a bit much, can we cover the unit with material to dim the glow?

A: Hi! Rather than physically covering the unit, you may want to consider simply disabling the built in LED. To do this (using the desktop UniFi controller software): Login to the UniFi controller -- Select Settings (Gear icon) --Select Site -- Uncheck the option to enable the status LED -- Select Apply Changes. Please note that this applies to all of the access points you manage (unless you have set-up multiple sites); if you have more than one access point, all of their LEDs will be disabled. If you are using the mobile application to manage your device(s), the ability to disable the LED is coming in a future update. As for physically covering the unit, I suppose you could do so with minimal effects (depending on the material), but I would strongly suggest disabling the LED over covering the unit. The last thing you want is to adversely affect the signal emitted from the device.

Q: 3. Does this AP require that you use a Unifi Router? Or can you use it with an existing system using another router?

A: The Ubiquiti Networks UniFi IW HD In-Wall Wi-Fi Access Point BH #UBUAPIWHDUS can be used with any brand of router.

Q: 4. Will this work with Verizon fios router or will i need a POE injector? Any other surprises i may run into?

A: You will need to use the PoE injector. Routers don't have PoE ports in general. The PoE injector is included.

Q: 5. Can this product be installed in a dry location on a screened porch?

A: The Ubiquiti Networks UniFi IW HD In-Wall Wi-Fi Access Point BH #UBUAPIWHDUS is designed for indoor use but it might be ok if you are sure it will be dry and it won't be exposed to direct sunlight. It is rated to work at: Operating Temperature: -10 to 60° C (14 to 140° F) Operating Humidity: 5 to 95% Noncondensing

Q: 6. When connecting items through the Ethernet ports on this, will it behave like a managed or unmanaged switch? Will you still have the stats and data on the individual connections?

A: The capabilities and analytics will depend on how you setup the unit via the UniFi control panel.

Q: 7. Can you re-use the ceiling mount from the UAP-AC-Pro?

A: The Ubiquiti Networks UniFi U6 Enterprise Wi-Fi 6E Tri-Band Access Point BH #UBU6ENTERPRS can use the same Ubiquiti Networks UniFi Professional Mounting System as the UAP-AC-Pro.

Q: 8. How many radios are in this AP? to get the maximum throughput I would assume 3 radios as they would operate simultaneously.

A: The Ubiquiti Networks UniFi U7 Pro Tri-Band Wi-Fi 7 Access Point uses a single tri-radio that allows all three bands to operate simultaneously for connection to 300+ devices. Please see the build features listed by Ubiquiti here: https://bhpho.to/3Mfk9Qf

Q: 9. Do I have to mount right away or can I lay flat until time to mount it and still get wifi?

A: The Ubiquiti Networks UniFi U6 Enterprise Wi-Fi 6E Tri-Band Access Point does not need to be mounted to function.

Q: 10. Is this TP Link adapter compatible with a Net Gear Powerline 1000 system?

A: Yes, this TP-Link TL-WPA7617 AV1000 Powerline Access Point Module is compatible with the Netgear PL1000 Powerline 1000 Network Adapter Kit. It is compatible with all HomePlug AV and AV2 Standard Powerline adapters.