Amaze your party-goers with the ColorKey Droid FX, a multi-effect moving head fixture equipped with multi-colored LEDs and lasers designed to provide a remarkable multicolor light show for clubs, bars, weddings, and similar events. The multi-beam "Droid" effect comes from eight, 10W RGBW LEDs perched on two endlessly rotating double-arms. With the addition of unlimited tilt rotation, Droid FX offers unparalleled movement possibilities.

Sandwiched between swirling light beams are 4 powerful 10W golden yellow LEDs that produce intense strobing effects with up to 20 flashes per second. Droid FX is also equipped with red and green lasers on the top, bottom, and sides of the unit. Controlling the fixture is easy when you choose between Sound Active, Auto-Program or DMX 512 for more versatile use. With 18 channels, the DROID FX allows advanced users to create complex lighting setups. The Droid FX 150 ships with a mounting bracket and a power cord.

Multicolor LEDs, Strobe, Red/Green Laser    Ideal for Events, Clubs, Weddings    8 x 10W RGBW, 4 x 10W Golden Strobe LEDs    2 x 100mW Red + 2 x 50mW Green Lasers    0 to 100% Smooth Linear Dimming    DMX 3-Pin I/O, 18-Channel Mode    Pan 0-540°, Tilt Endless Rotation    Dual Heads Endless Rotation    Sound Active, Auto-Program, DMX512    Includes Bracket and Power Cord

• Beam: 8 x 10W RGBW LEDs
• Strobe: 4 x 10W Golden LEDs
• Laser: 2 x 100mW red laser, 2 x 50mW green laser
• Endlessly rotating dual heads create spinning multi-color beams reminiscent of dual helicopter blades
• Red and green lasers 
• Two green lasers and two red lasers, each located on one of the four sides of the head, create a rainfall of lasers across the walls, floor, and ceiling
• The golden strobes located on opposing sides of the head create additional ambience when mixed with the beams and lasers
•  Choose between Sound Active, Auto-program, or DMX 512 for more versatile use

Related Questions and Answers

Q: 1. Does Manfrotto 1004BAC stand (which can hold until 9 kg), will hold this light (which is actually 10kg, without V mount battery)?

A: We can not recommend exceeding a stands load capacity as it can have dangerous consequences.

Q: 2. Can the LED head be used on the AD200 Pro?

A: Yes the AD-L can be used on the AD200 Pro.

Q: 3. When will the H200R Round Head be available?

A: The Godox Witstro H200R Round Flash Head for AD200 TTL Pocket Flash, B&H # GOH200R is now available. https://bhpho.to/2Z4anFD

Q: 4. in specs is written that weight is 10.12 kg, but without v mount yes?

A: The spec is with out the battery.

Q: 5. I do not see a headset jack. Can you monitor the output through a headset?

A: Unfortunately there is no headphone output available on the PVi8500.

Q: 6. Does this microphone put out a balanced signal?

A: I have a Pyle PDM MIC 58 which essentially the same mic as this one. The mic does not come wired as a balanced mic but I found this video where you can perform a simple mod. Go to youtube and search for Pyle PDMIC78 Microphone - SM-57 Knockoff it's posted by a guy named Bob H.If you are making a short run (less than 20 feet) to your mixer or input source, you may not even need to balance it though. I have been using mine with the supplied 15 foot xlr to 1/4 mono cable and it sounds great into my Zoom H1 recorder. This is a great value and instead of everyone asking why this is so much less than the Shure SM57, the question should be why is the SM57 so expensive?I have one of these in my cart and will be getting one with my next order to go along with the PD MIC 58.

Q: 7. Would this works nicely with a XH2s ? IBIS support and Phase AF ?

A: Yes, the Fringer NF-FX II Nikon F Lens to FUJIFILM X Camera Adapter will work with the FUJIFILM X-H2S Mirrorless Camera (B&H # FUXH2S), because of the high performance stacked sensor.

Q: 8. What is the height of this adapter? Can it be installed on a Fuji X-pro 3 without exceeding below? Cyrille

A: The Adapter is 3'' tall. The adapter will hang out from the bottom of an X-Pro 3 about 10mm.

Q: 9. Does this unit include the remote control device for adjusting the focus & aperture?

A: The MTF Effect Control Unit 2 is not included.

Q: 10. What is the LEDs CRI rating?

A: Sorry, Godox does not list a CRI rating for this. With entry level light sources like this, this is usually the case. Also keep in mind that CRI was designed for continuous light sources and only some high-end flash companies are beginning to use them for flash. To give you something to go on, here is the color temp that Godox does list. The color temperature of the AD-L LED Head for AD200 Pocket Flash is 5600 +/- 200