Create professional looking prints with vivid colors and sharp details by using this 24" x 150' roll of HP Bright White Inkjet Paper 24" x 150' Roll 2-Packfrom HP. It is useful for posters, presentations, POP and retails displays, and CAD, AEC, and GIS applications. It has a wood fiber base material with a basis weight of 90 gsm / 24 lb, as well as a thickness of 4.7 mil, a whiteness of 166%, a brightness of 113%, and an opacity of 94%. Finished prints dry in approximately 90 seconds at room temperature and feature a simple matte surface finish. Additionally, the media is recyclable and comes on a 2" core.

Recyclable Wood Fiber Base Material    Basis Weight: 90 gsm / 24 lb    Thickness: 4.7 mil    Whiteness: 166%    Opacity: 94%    Brightness: 113%    90 Seconds to Dry    Surface Finish: Matte    Core Size: 2"

Related Questions and Answers

Q: 1. Does anyone know if this role has a 2" or 3" core?

A: Core size is 3".

Q: 2. Is this compatible with the Epson Sure Color SC-P900 Commercial Printer?

A: Yes this paper is compatible with the SCP9000 printer.

Q: 3. Does anyone know what Canon printer settings (PROGRAF PRO-1000) to use for this paper? Because they're competitors, there's no ICC profile, but there should be a standard setting that should work.

A: Go on Epsom's site, find out the Media Type and paper profile, the compare with a similar paper that Canon makes. Input those settings and you should be fine. It might be wise to buy a box of 8 1/2 x 11 Cold Press to do test prints on until you dial your settings in. I did that when I printed my portfolio. Best of Luck.

Q: 4. Can this stick to cardboard?

A: Yes, that will work.

Q: 5. What's the thickness (.mil) of this paper?

A: I do not know the .mil, but it is 48 lb. Purchased this and would do so again--nice weight and has no problem going through my inkjet printer. Used it for old photos. It was also used to make signs for school, which was then laminated. Works great and highly recommend!

Q: 6. Can I use this paper with the Epson Stylus Pro 9890?

A: yes!

Q: 7. What is the correct printer profile for this paper?

A: You have to select Enhanced Adhesive Synthetic Paper as Media Type setting in your printer driver. If thats is not listed, select Media 2 . If these settings are not listed, select Adhesive Synthetic Paper . If Enhanced Adhesive Synthetic Paper and Media 2 are not listed, and you want to print with even higher saturation than the Adhesive Synthetic Paper setting, select Glossy Paper-Photo Weight as the Media Type setting in your printer driver. However, colors in your printout may not exactly match the colors in your original.

Q: 8. Having difficulty with adhesion. On the wall for only two weeks and find it peeling away. Any installation tips beyond applying pressure?

A: I have been using this product for about one and a half years. I use it on a painted metal surface outside for advertising. The product gets changed out every month. The ink has very little ware and the adhesion is still stuck on with no peeling. This is in direct sunlight and weather with no protection. Is your wall flat or rough? Painted wallboard or non painted? Sounds like the substrate you are applying it to is the issue.

Q: 9. what kind of surface does this stick best on?

A: it still really well on metal and glass. It can also be used on drywall, but the wall must be sanded and cleaned first for it to really stick... and over time it sort of begins to peel away.

Q: 10. will this work with a Canon iPF 8400s?

A: Yes it is compatible with the ipf 8400 printer.