Yamaha R-N600A 2.1-Channel Network A/V Receiver Black

Yamaha R-n600a 2.1-channel Network A/v Receiver Black

Product Code: eq144761
Availability: In Stock

$2,699.85 $3,509.80

Qty

8 reviews Write a review

Description
Reviews (8)

Listen to nuanced high-resolution sound from a wide range of sources with the black Yamaha R-N600A 2.1-Channel Network A/V Receiver Blackfrom Yamaha. The receiver utilizes Yamaha's ToP-ART (Total Purity Audio Reproduction Technology) design concept, which combines internal circuitry with a resin Art Base chassis to minimize vibration and maintain audio integrity. Internal circuitry, such as the ESS SABRE ES9010K2M 384 kHz, 32-bit DAC for high-end S/N performance, an ultra-precise crystal clock dedicated to USB DAC accuracy, and a Pure Direct mode to eliminate signal degradation. This technology can apply to various connected components, a turntable, or streaming audio via MusicCast, Wi-Fi, or Bluetooth. Audio you can output to A/B-switched stereo speakers with optional subwoofer.

Up to 80W per Channel at 8 Ohms ESS SABRE ES9010K2M 384 kHz 32-Bit DAC Pure Direct Mode for Purer Sound MusicCast, Wi-Fi & Bluetooth Streaming CD & 3 x RCA Line Inputs Dedicated Photo Input for Turntables Optical Inputs for TV Connection A/B Switching Speaker Outputs Subwoofer Output Front USB & Headphone Ports

Key Specs
Channels	2.1
Power Output per Channel	80 W at 8 Ohms / 20 Hz to 20 kHz / 0.07% THD 60 W at 4 Ohms / 20 Hz to 20 kHz / 0.07% THD
Rear A/V Inputs	4x Stereo RCA 1x Stereo RCA (Phono) with Ground Screw 2x Optical TOSLINK 2x Digital Coaxial
Front I/O	1x USB-A Input 1x 1/4" / 6.35 mm Headphone Output
Wi-Fi	Yes
Bluetooth	Yes
Amplifier
Channels	2.1
Power Output per Channel	80 W at 8 Ohms / 20 Hz to 20 kHz / 0.07% THD 60 W at 4 Ohms / 20 Hz to 20 kHz / 0.07% THD
Dynamic Power per Channel	105 W at 8 Ohms 125 W at 6 Ohms 150 W at 4 Ohms 175 W at 2 Ohms
Frequency Response	10 Hz to 100 kHz ±1 dB 20 Hz to 20 kHz ±0.5 dB (Pure Direct Mode)
Audio Processing
Supported File Formats	11.2 MHz DSD, AAC, AIFF, DSD, FLAC, MP3, PCM, WAV, WMA
DAC	384 kHz / 32-Bit (ESS SABRE ES9010K2M)
Connectivity
Rear A/V Inputs	4x Stereo RCA 1x Stereo RCA (Phono) with Ground Screw 2x Optical TOSLINK 2x Digital Coaxial
Rear A/V Outputs	1x RCA Subwoofer
Front I/O	1x USB-A Input 1x 1/4" / 6.35 mm Headphone Output
Other Rear I/O	1x AM Block Input 1x FM Coaxial F-Type Input 1x RJ45 (Ethernet) Input/Output
Speaker I/O	4x Binding Post Pairs
A/B Speaker Selection	Yes
Signal to Noise Ratio	RCA: 100 dB
Wireless Connectivity
Wi-Fi	Yes
Bluetooth	Yes
Supported Audio Codecs	AAC, SBC
Wireless Audio Protocols	AirPlay 2, MusicCast
Control
Mobile App Compatible	No
Tuner Section
Tuner Type	AM, FM
Sensitivity	FM Mono at 50 dB: 3 µV / 20.8 dBf
Signal to Noise Ratio	FM: 65 dB (Mono) 64 dB (Stereo)
Power
Power Consumption	Network Standby: 0.2 W
Physical
Dimensions (W x H x D)	17.1 x 6.0 x 15.4" / 43.4 x 15.2 x 39.1 cm
Weight	21.6 lb / 9.8 kg
Packaging Info
Package Weight	26.57 lb
Box Dimensions (LxWxH)	20.9 x 18 x 11.4"

This mode is designed to virtually eliminate signal degradation by having music signals bypass the buffer amp, and tone / loudness / balance controls, taking the shortest route possible to your speakers.

Use either the Wi-Fi or wired Ethernet connection to conveniently stream audio from popular online services, such as Spotify, Amazon Music, Pandora, TIDAL, SiriusXM, and more. You can also use Bluetooth to conveniently stream audio from mobile devices, such as a phone or tablet.

Connect an optional storage device to the front panel USB-A port to directly play back digital files. An ultra-precise dedicated crystal clock is incorporated to improve the signal accuracy of the built-in USB DAC. Whether through USB or a network connection, you can play files at native DSD 11.2 MHZ or PCM 384 kHz.

80W per channel output at 8 ohms
Stream audio to other MusicCast devices for whole-home audio
Subwoofer output for dedicated bass
Optical inputs for connecting and improving TV audio
Front headphone port
Built-in AM/FM radio

Related Questions and Answers

Q: 1. Does this unit have PHONO inputs for a turntable? Or will I need to purchase a separate preamp?

A: The Yamaha RX-V4A does not have a Phono Input. You will need to purchase a separate Phono PreAmp to connect a turntable with no built in PreAmp.

Q: 2. Will this unit accept RF commands from Direct TV remote??

A: Yes you would be able to set up the Yamaha RX-V4A to receive commands from your DirecTV remote.

Q: 3. 8k?

A: The Yamaha RX-V6A supports 4K UHD Upscaling & Pass-Through.

Q: 4. I have (5) 6 ohm speakers. Is there a setting to set the output for 6 ohm speakers?

A: No there is not an alternate setting for this but you will be able to use your speakers with the Yamaha RX-V6A.

Q: 5. Do the streaming functions (and specifically Airplay 2) work over the wired ethernet connection?

A: With the Yamaha RX-V4A 5.2-Channel Network A/V Receiver with MusicCast BH #YARXV4ABL it will work with the wired Ethernet connection for streaming and AirPlay.

Q: 6. I need to be able to see the passwords I enter. How can I turn off hiding the password?

A: We are unable to provide an answer based on the information provided. For further assistance please contact us at sales@bhphoto.com or call us at 1-800-606-6969.

Q: 7. can this receiver power 8ohm speakers without issues?

A: Yes, this receiver is made to be used with 6 or 8 ohm speakers. There is a menu setting for the unit’s speaker impedance to be set to the impedance of the speakers connected.

Q: 8. Does it have 110 and 220 volts ?

A: The Yamaha R-N800A 2.1-Channel Network A/V Receiver (Silver), BH # YARN800ASL, is 120VAC 60Hz only.

Q: 9. Can this operate with R&L speakers & Center only?

A: The Yamaha RX-V4A supports Front Left, Front Right, Front Center, Surround Left and Surround Right, with 2 preouts for use with up to 2 subwoofers, making it a 5.2 channel AV receiver.

Q: 10. Av is labeled 7.2 On the .2 on the sub are the sub individually controlled? Thanks

A: They appear to be controlled as a pair in the menus.

Joseph	28/08/2024
[2.1] I am very pleased with this amp, purchased to replace on old Bose Stereo Lifestyle system. The HEOS system took only minutes to set up, enabling me to stream internet radio, Sirius, and Spotify. I use it only for stereo music reproduction including CD. The sound is great. I have no regrets and would recommend it. 5

Hill1	27/07/2024
[AM, FM] This Stereo 70S is so nice to look at, as are all the new Cinema styled Marantz pieces. It is in my kitchen, and as can be seen, is paired with Definitive Technology D7 bookshelf speakers (amazing gems.) Suffice to say this is a wonderful piece of audio/video jewelry, it is so gorgeous looking, and the sound is clean, very musical, and I would say accurate to the source. My wife uses this system and she loves it! HEOS connects with it perfectly, and I am so happy she is enjoying great sounding music! The fact that you can have 2 pair of speakers with this unit, either playing separately or together, is a really nice feature that I know will be used eventually. The new remotes are so nice and solid feeling as well, and the knobs on the front turn with the heft and feel of products costing much more. If you are looking for an easy to use/set up amplifier with excellent streaming capabilities, this should be at the top of your list.Thank you Marantz! 5

Joseph	21/07/2024
[2.1] Excellent sound reproduction. At 75 watts per channel it works great with my JBL speakers. Sounds great at low levels. I recommend this unit for it’s traditional function as a wonderful stereo receiver. 5

Joe Shmo	11/06/2024
[AM, FM] Purchased to replaced the NR1200 with no regrets. Great quality and look nice compared to the outdated rounded front of older Marantz units. New remote and OS is also a plus. Good power, drives SVS Pinnacles with out any issues 5

John	11/06/2024
[2.1] I've been streaming deezer and playing records and love the sound, especially paired with the subwoofer Yamaha NS-SW100 10. The musiccast app is easy to use, better than bluetooth streaming. 5

edwin	28/05/2024
[AM, FM] is very good in all features, it has a wattage power of 120 per channel. 5

anyonymous	27/04/2024
[AAC, SBC] Beautiful design and functionality amazing sound quality that can’t be matched, I love it!!! 5

Joshua	30/11/-0001
[2.1] Installed a couple weeks ago and spent sole time with this beast. Paired with Klipsch Heresy IV the imaging is outstanding, as if it’s impossible to tell where the speakers even are. YPAO does a great job of equalizing for the room, and the loudness level is a welcome throwback especially for nighttime listening. ARC works as expected too. 5