This pair of OCTAMAS 15mm Titanium Rods 4" Pairfrom OCTAMAS 15mm Titanium Rods 4" Pairis suitable for mounting an EVF bracket, matte box, follow focus motor, or other rod accessories onto your rig without adding significant weight.

These 4" long support rods are extremely lightweight yet exhibit less flex than carbon fiber rods of the same length, and they are lighter than either steel or aluminum rods while being at least as rigid and strong. Made from titanium, the rods are corrosion resistant, and they are machined and ground flat to prevent binding as you mount accessories.

Ultralightweight Design    Grade 5 Titanium Construction    Corrosion Resistant    Each Rod Measures 4" in Length

Related Questions and Answers

Q: 1. Does this work with C300 Mk3?

A: Yes, the SHAPE Baseplate with 15mm Rods for Canon EOS C500/C300/C100 will work with the C300 Mark III.

Q: 2. How much does this shoulder rig weight?

A: The Chrosziel Lightweight Shoulder Support for Sony FX6 weight is 1.2 lb / 550 g.

Q: 3. Is there no way to close all the way? Ie fold in the sides and fold down the eyebrow?

A: When using the LanParte MB-02 matte box you would lower the top flag with the side flags on or remove the side flags. The Side flags fold to allow you to lower the top flag.

Q: 4. Would this work for the arca receiver on the fx3 tilta cage?

A: The Tilta Modular 15mm LWS Baseplate Type I (Black) BH #TIAMBP1B • MFR #TA-MBP1-B is a Type I Baseplate. We can only recommend this type III Baseplate model for Tilta type III (FX3) cages. Tilta Modular 15mm LWS Baseplate Type III (Black) B&H # TIAMBP3B

Q: 5. DoI need any extra equipment to use this on the Fujinon 18-55mm on my Sony FS7?

A: You won't need gear ring for cine lenses, but the gear ring comes in the FF-02 kit. What you may or may not need is the extension arm (FF-ARM-02) because the fujinon 18-55 has smaller diameter and the original gear on the FF-02 may not reach the gear on your fujinon

Q: 6. Hi can i use this with a sony fx3? Thanks

A: Yes you can. While it is customized to work best with the C300 the mounting screws are standard which means that it will work with just about anything.

Q: 7. Would this plate be compatible with the SmallRig FX3 cage? Thank you

A: Yes, the Tilta Modular 15mm LWS Baseplate Type I should work with Smallrig cages. However, in the past Tilta ARCA SWISS mounts may not fit. We recommend the Smallrig SmallRig Universal Baseplate with 15mm LWS Rod Support for use with your SmallRig cage. SmallRig Universal Baseplate with 15mm LWS Rod Support BH #SMDBC2272B

Q: 8. Does this work with the C200?

A: Hello Kaleb, Thank you for your question! Zach is right, the optical center is not ideal because this plate was designed to fit the C300 Mark i. We do have a specific baseplate for the C200 which can be found here:a href= https://www.shapewlb.com/en/product/brands/canon-camera-supports/canon-c200-camera-supports/canon-c200-15mm-base_1011.aspx?id_page_parent=1281. target= _blank https://www.shapewlb.com/en/product/brands/canon-camera-supports/canon-c200-camera-supports/canon-c200-15mm-base_1011.aspx?id_page_parent=1281./aYou can consult its features to see what it offers.We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 9. Will this mount to a standard Sony VCT tripod plate?

A: The Chrosziel Lightweight Shoulder Support for Sony FX6 has a V mount on the bottom and will engage with a Sony VCT type tripod.

Q: 10. It works with VCT Universal Baseplate (zacuto)? Thanks.

A: Yes. I use it with Zacuto's Universal Baseplate and it works great. If you're using shorter lenses, such as CP.2s, CN-Es, Xeens or Rokinon Cine DSs, you may need to buy some shorter 3.5 15mm rods so that you can lower the bottom of the matte box below the rods. This allows you to center the matte box on the lens. I use this setup with a URSA Mini 4.6k, but if you are using a taller camera such as a RED, which has a higher lens mount, you may be OK.