This pair of OCTAMAS 15mm Titanium Rods 8" Pairfrom OCTAMAS 15mm Titanium Rods 8" Pairis suitable for mounting an EVF bracket, matte box, follow focus motor, or other rod accessories onto your rig without adding significant weight.

These 8" long support rods are extremely lightweight yet exhibit less flex than carbon fiber rods of the same length, and they are lighter than either steel or aluminum rods while being at least as rigid and strong. Made from titanium, the rods are corrosion resistant, and they are machined and ground flat to prevent binding as you mount accessories.

Ultralightweight Design    Grade 5 Titanium Construction    Corrosion Resistant    Each Rod Measures 8" in Length

Related Questions and Answers

Q: 1. Does the shoulder pad slide forward and back to change the center of gravity?

A: Yes, The shoulder pad on the Chrosziel Lightweight Shoulder Support for Sony FX6 can be repositioned by sliding. See image https://bit.ly/3zIVjT5

Q: 2. Does this work with the C200?

A: Hello Kaleb, Thank you for your question! Zach is right, the optical center is not ideal because this plate was designed to fit the C300 Mark i. We do have a specific baseplate for the C200 which can be found here:a href= https://www.shapewlb.com/en/product/brands/canon-camera-supports/canon-c200-camera-supports/canon-c200-15mm-base_1011.aspx?id_page_parent=1281. target= _blank https://www.shapewlb.com/en/product/brands/canon-camera-supports/canon-c200-camera-supports/canon-c200-15mm-base_1011.aspx?id_page_parent=1281./aYou can consult its features to see what it offers.We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 3. DoI need any extra equipment to use this on the Fujinon 18-55mm on my Sony FS7?

A: You won't need gear ring for cine lenses, but the gear ring comes in the FF-02 kit. What you may or may not need is the extension arm (FF-ARM-02) because the fujinon 18-55 has smaller diameter and the original gear on the FF-02 may not reach the gear on your fujinon

Q: 4. what is the min/max filter thickness that will work with this matte box?

A: This matte box will work with any 4 x 5.65" sized filter. The standard for such a filter is 4mm thick.

Q: 5. Would this work for the arca receiver on the fx3 tilta cage?

A: The Tilta Modular 15mm LWS Baseplate Type I (Black) BH #TIAMBP1B • MFR #TA-MBP1-B is a Type I Baseplate. We can only recommend this type III Baseplate model for Tilta type III (FX3) cages. Tilta Modular 15mm LWS Baseplate Type III (Black) B&H # TIAMBP3B

Q: 6. Hi can i use this with a sony fx3? Thanks

A: Yes you can. While it is customized to work best with the C300 the mounting screws are standard which means that it will work with just about anything.

Q: 7. It works with VCT Universal Baseplate (zacuto)? Thanks.

A: Yes. I use it with Zacuto's Universal Baseplate and it works great. If you're using shorter lenses, such as CP.2s, CN-Es, Xeens or Rokinon Cine DSs, you may need to buy some shorter 3.5 15mm rods so that you can lower the bottom of the matte box below the rods. This allows you to center the matte box on the lens. I use this setup with a URSA Mini 4.6k, but if you are using a taller camera such as a RED, which has a higher lens mount, you may be OK.

Q: 8. Does this work with any v mount? Can I use it for most cameras?

A: Yes, the OCTAMAS gear Power Box Pro Dual V-Mount to V-Mount Adapter would work with any standard V-mount interface. The OCTAMAS gear Power Box Pro Dual V-Mount to V-Mount Adapter could work with a wide variety of camera platforms.

Q: 9. May I fix Sachtler or Manfrotto tripod plate with two screws to this product to stay solid fix?

A: Yes, so long as the tripod plate doesn't block the rod tension screws on the side of this Tilta Baseplate.

Q: 10. This came up when I set rod support to "15mm LWS". Is that correct or is this standard studio rod distance?

A: That is correct, this system is 15mm LWS.