The 8' BB&S 4-Pin XLR Cable with Splitter for 4-Way Controlleris designed to connect to the 4-Way Controller Pipeline Reflect from BB&S Lighting. A 3-pin XLR splitter is also included.

Fire-Retardant    20 Guage    PVC Jacket    Max. Load of 300V/10A    4-Pin XLR Connectors    Two 3-Pin Male XLR Splitter

XLR 4-pin male and female connector cable

Maximum load of 300V / 10A

Four 20 AWG OFC conductors

Fire-retardant PVC inner jacket

Durable PVC outer jacket

Related Questions and Answers

Q: 1. What is the power rating on the output of this device? (watts or amps)

A: The power rating depends on the battery it is hooked up to. The P-Tap batteries that we sell seem to top out around 266 Wh.

Q: 2. How long is this cable?

A: Crackling with mini plugs is usually an issue of having Plug-In Power turned on in the recorder. The NT4 mike does not run on Plug-In Power...when you want to connect it with a mini cable you need to power the mike with an internal nine-volt battery. So turn off Plug-In Power on the recorder. You'll get better battery life on your recorder as well! (An alkaline nine volt battery will run the NT4 for about 400 hours according to the Rode site.)

Q: 3. What brand are the connectors on this cable? I have a cable that comes from Rode for my nt4 and it has black, no-name connectors, that seem to want to pull apart when you remove it from the mic. Concerning.

A: Rode has not specified a brand name for the XLR connectors. For another cable option with 5-pin XLR female to two 3-pin XLR male, you may want to consider the Remote Audio 5-Pin Stereo XLR Female to Dual XLR Male Y-Cable (B&H #RECAXSTE25) which is 25' long and uses Neutrik connectors with Mogami cable. The same Remote Audio cable is also available in 18" length (B&H #RECAXSTE). We also have the Sony 5-Pin to Dual 3-pin XLR Cable for ECM-680S (B&H #SO5P3PXSGC) which is 16" long and shows Neutrik connectors in the photo.

Q: 4. Will this work with this schoeps cable? https://www.bhphotovideo.com/c/product/1513008-REG/schoeps_ak_2l_su_adapter_cable_2_lemo_to.html ?

A: Yes, this Rode NT4-DXLR Stereo 5-Pin XLR to Dual 3-Pin XLR Cable for NT-4 Fixed X/Y Condenser Microphone (10.3'), would work with the Schoeps Adapter Cable: 2-Lemo To XLR-5M for CCM_L Pair you have asked about.

Q: 5. This unit looks to have female adapters on male ends? Need a cord to go from 2.5 to 2.5 male both ends, did this have that?

A: Pluto Flash Splitter Cable has 2-2.5mm female to 3.5mm male adaptor and 1-3.5mm female to 2.5mm male adaptor. When you remove all the adaptors the splitter cable has 2-3.5mm female connector and 1-3.5mm male connector.

Q: 6. Will this connect properly with good audio quality from the RodeLink Receiver/Rode Wireless Go's Receiver to a camera's XLR input?

A: It works for me

Q: 7. Can this be used to attach two LANC controllers to one camera?

A: No, the Pluto Flash Splitter Cable is not made to attach LANC controllers.

Q: 8. Could this unit be used to split clearcom or rts units?

A: This unit is meant to split audio only, and is wired differently than communication systems. We do carry a splitter for RTS, which is the Telex TW-5W 1 In, 5 Out Splitter Box, B&H # TETW5W.

Q: 9. Some of the original mini cables that came from Rode with their NT4 mikes had 12 dB pads built into the XLR5 connector. Does this cable have such pads in it? Or is it just straight wire from XLR to mini? I'm looking for one that doesn't have the resistive pads.

A: I bought this cable as a back-up for the one provided with my Audio-Technica stereo mic, and it's much less efficient, so I suspect that there is an unseen pad in the XLR, or the cable is simply more resistive. I'm returning it -- the signal into my Marantz digital recorder is too low.

Q: 10. Is this compatible with the Audio-Technica BP4025 stereo mic?

A: Thank you for your question. This cable will function perfectly with the 5-pin output of the BP4025 and to split the stereo signal to separate left and right xlr.