The 86mm Kase KW Revolution Entry Kit 86mmfeatures ND8, ND64, and CPL magnetic filters as part of Kase's color-coded KW Revolution filter system. The filters are designed with color-coded filter frames for easy identification and swapping. The ND8 is color-coded blue, the ND64 is yellow, and the CPL is silver. The kit also includes adapter rings, a filter case, and a front lens cap. The KW Revolution system is based on Kase's earlier Wolverine series and is fully backwards-compatible with Wolverine filters.

KW Revolution filters are made with shock resistant and water resistant optical glass that's durable, easy to clean, and doesn't cause any color cast. In addition to being magnetic, the filters are also front threaded. This is one of the differences between the KW Revolution series and the earlier Wolverine series.

This kit includes both the standard magnetic adapter and the inlaid magnetic adapter supported by the KW Revolution series. The standard adapter screws onto your lens and lets you magnetically attach the filter to it. The inlaid adapter works a bit differently, as it secures to your lens in a very recessed way. It screws onto the front filter threads very close to the front lens element and remains nearly hidden within the filter thread area. It hardly leaves any space between the lens and filter. This results in minimized vignetting with wide-angle lenses when you attach the filter. The filter snaps onto the adapter magnetically. Up to four filters can be stacked in total, both from this KW Revolution series and from the earlier Wolverine series, and the filters can be freely rotated. Please see more about the inlaid adapter below.

Color-Coded Magnetic Filters    ND8, ND64 & CPL Filters    Filter Case and Front Lens Cap    Standard and Inlaid Magnetic Adapters    Stackable    Front Threaded    Compatible with Kase Wolverine Filters    Shock-Resistant Glass    No Color Cast

When your KW Revolution filter (or backwards-compatible Wolverine filter) is removed from the inlaid adapter, you can leave the adapter on the lens. It will not interfere with attaching the original lens cap to the front of your lens. Similarly, it won't interfere with screwing in regular screw-in filters to the filter threads of the lens.

Besides securing directly to the lens, the inlaid adapter can instead be screwed onto the front threads of regular screw-in filters. The screw-in filter can then be screwed onto your lens, and the inlaid adapter will be on the front of that filter. You can then magnetically attach KW Revolution and Wolverine filters onto the adapter. The benefit of this flexibility is that it allows you to mount the KW Revolution filters on top of regular screw-in filters that you may want at the bottom of your stack.

The inlaid adapter is not compatible with step rings.

There are a few ways to screw in the ultra-slim inlaid adapter. The main way is to first attach it magnetically to one of the included ND filters, and to then screw in both by hand. Then you can remove the filter or stack additional ones onto it. You can also attach the optional Kase magnetic lens hood.

Related Questions and Answers

Q: 1. can the lens hood be Reattached in shooting position once this UV filter is attached?

A: Yes, the lens hood can be reattached once you install the Kase UV filter on the lens.

Q: 2. Will this fit the slr magic product in link below? https://www.bhphotovideo.com/c/product/1403570-REG/slr_magic_slr82vnd86ie_82mm_self_locking_nd_0_4.html

A: Yes. The 86mm Image Enhancer 1.2 filter has 86mm front threads that accommodate other front-threaded filters, and will give the Sigma LCF-86 III enough room to sit. However, like with most filters, the threaded portion can sometimes be quite shallow, making lens caps a bit less secure than you might be familiar with.

Q: 3. What is the Filter Factor of this filter..?

A: The Kase UV Filter Kit for Nikon NIKKOR Z 800mm f/6.3 VR S Lens is a UV filter with no filter factor since it does not cut any light entering the lens.

Q: 4. can the lens hood be Reinstalled in shooting position once this UV filter is attached?

A: The lens hood can't be reinstalled in shooting position once the Kase Filter Kit for Canon EF 800mm f/5.6L IS USM Lens is attached.

Q: 5. does this pack have a trolley sleeve?

A: The CineBags CB25 Revolution Backpack does not list that it has a trolley sleeve.

Q: 6. Will this fit a sigma 150-500 lens?

A: Yes it will!

Q: 7. Will this filter accept an 82mm Canon lens cap?

A: The filter doesn't have any front threads so the lens cap would most likely fall off.

Q: 8. Does "Kase K9 Adapter for Nikon Z 14-24mm f/2.8 S Lens, B&H #KA1111080052" make this kit compatible with the Nikon 14-24 Z?

A: Yes, the Kase K9 Adapter for Nikon NIKKOR Z 14-24mm f/2.8 S Lens will allow you to connect the Kase K9 100mm Slim High-End Filter Holder Kit to the Nikon NIKKOR Z 14-24mm f/2.8 S Lens.

Q: 9. hello, I have a sigma 50 - 500 zoom, 1: 4 - 6.3, EX APO DG HSM, is this the correct zoom? thank you

A: The Heliopan 86mm Long Metal Lens Hood is incompatible with the Sigma 50-500mm f/4-6.3 EX DG HSM Autofocus Lens for Nikon AF-D. The lens hood for this lens is no longer available.

Q: 10. Can this carry a tripod?

A: Yes, the CineBags CB25 Revolution Backpack (20th Anniversary Edition, Midnight Black) can be used to transport a tripod, though the size and weight of the tripod will affect how well it is able to carry them. Smaller tripods would work best where as larger tripods may not work at all.