Movmax Vibration Isolator Kit Mitchell Mount Jimmy Jib

Product Code: eq146268
Availability: In Stock

$2,997.00 $3,776.22

Qty

15 reviews Write a review

Description
Reviews (15)

The Vibration Isolator Kit with Mitchell Mount from MOVMAX is designed to work with the Jimmy Jib. This model comes with a Mitchell mount, and it supports positive or negative installation on your Jimmy Jib unit and protects your camera from having any undesirable vibrations that can compromise your image acquisition.

Works on Jimmy Jib Mitchell Mount Included

General
Compatibility	Stanton Jimmy Jib
Physical
Dimensions	9.6 x 4.4" / 245 x 113 mm
Weight	4.2 lb / 1.9 kg

Related Questions and Answers

Q: 1. Will this work with both the Pocket Jib and the Pocket Jib Traveler?

A: This is for the larger Pocket Jib only.

Q: 2. Will this work with the bolin ptz camera?

A: Depends as on the camera unit being used. One of the following units can be used L3030015 BL-M-PMA Pole Mounting Adapter Accessory, Optional L3030016 BL-M-CMA Corner Mounting Adapter Accessory, Optional L3030013 SD-WM SD500 Wall Mount Bracket Accessory, Optional L3030014 BL-SD-CMS SD500 Ceiling/Pendant Mount Set Accessory, Optional

Q: 3. Will this work inverted? With the camera hanging off the bottom?

A: Yes, as this is designed to also work for projectors and these are almost always mounted on an inverted setup.

Q: 4. What thread are the posts and hardware?

A: They are 5/16-18 SS soc flat head bolts

Q: 5. Will this fit the Dji Pocket 2?

A: Yes, the DJI Pocket 2 Gimbal can mount on the MOVMAX Blade Arm for DJI Pocket 3 as the arm features a 1/4"-20 mount.

Q: 6. Can this be just regular Mitchell mode as well? Or does it go on OConnor only?

A: It cannot be. You will need BH #CAHLQQ for Mitchell Mount. https://bhpho.to/38WzjGU

Q: 7. is this compatible with the ronin s?

A: no it will not be compatible with the Ronin S

Q: 8. The matching K-Pod tripod is rated for loads to 500 lbs - what is the load rating of this swivel mount (the specs do not say)?

A: The Kessler Crane Pocket Jib Swivel Mount is compatible with the Kessler Crane Pocket Jib and should reflect the same payload as the K-Pod.

Q: 9. Is it better to put the isolation between the wall and the camera mount or between the wall Mount and the camera? Which will work better?

A: There is no standard to wall mounting vibration mounts. However, The vibration mount may cause even more camera movement if mounted to the wall and then the camera mount.

Q: 10. What is the weight capacity for this without slipping on the speed rail?

A: Approximately 150 lbs.

Julie	24/09/2024
One of our cameras would vibrate each time the A/C came on. We tried several options to dampen the vibration with no luck. This camera mount has reduced the vibration significantly. Great product. 5

Mike	18/09/2024
I was skeptical when I installed the mount but it really worked to remove vibration caused by subwoofers getting into the wall that the camera is mounted on. The camera went from unusable to perfectly smooth. Pretty cool! 5

Timothy	04/09/2024
Not much to it. It is a solid Mitchell plate. 5

Yuki	13/08/2024
This allows my 2nd AC to move tripods much faster than normal tie down. Especially when I go from tripod to dana dolly/ slider etc, this is very handy. It's a bit expensive piece, but you are buying speed on set. Definitely saves me maybe total of 10 min or so at the end of the job. 5

Chris	11/08/2024
I got the swivel mount instead of the hercules head to mount my kessler pocket pro jib to my K-pod. It works great and it provides good, smooth motion. 5

Jinpyo	23/07/2024
It showed the best performance in the projects we worked on. 5

Shadman	14/07/2024
This thing is absolutely stable and excellent construction quality. I attached my pocket 3 to this and made the following video below for sample: https://youtu.be/rSNG1P-R7QE?si=m2vyJVY0gPSq0J2M 5

Rafael	07/07/2024
Very good quality. 5

David	03/07/2024
We've tried really expensive mounts that didn't work and so we decided to give this one a try. By far, the best mount we've used in our sanctuary. We have a main highway right next store and the trucks would constantly shake our cameras. This mount stopped that issue right away. 5

Chadwick	29/06/2024
This really is a great piece. I usually run the tilts hydra alien arm with a Sony alpha camera but for lower profile shoots that I just want to get out and get done quickly and easily, this arm makes things so much easier and paired with the DJI osmo pocket 3 I find myself going to this setup more often than my full size setup. 5