Chauvet Professional Seetronic Powercon Cable 5Ft

Chauvet Professional Seetronic Powercon Cable 5ft

Product Code: eq146413
Availability: In Stock

$144.36 $192.00

Qty

11 reviews Write a review

Description
Reviews (11)

This CHAUVET PROFESSIONAL Seetronic PowerCon Cable 5ftfrom CHAUVET PROFESSIONAL Seetronic PowerCon Cable 5ftis a 3x14 AWG, 5' long cable commonly used for lighting. The cable has PowerCon connectors at both ends.

Made Specifically for Lighting 3x14 AWG

General
Connector 1	powerCON
Connector 2	powerCON
Cable Length	5' / 1.5 m
Wire Gauge	14 AWG
Environmental Resistance	No
Packaging Info
Package Weight	0.65 lb
Box Dimensions (LxWxH)	10.65 x 3.4 x 2.05"

Related Questions and Answers

Q: 1. Atbthe bottom of the mic can i just comnect that to a tascam and start recording. Cause my friend has this huge mic with the soft sound thing around and did that. So do i need anything like the phantom power to operate this?

A: Not good, don't buy it

Q: 2. 60201 lux at 1 m and 6689 lux at 1mtwo different phonetic values seems, what is the exact luminescence of this arri l7-c?

A: This is the Photometrics form Arri on the the ARRI L7-C LE2 LED Fresnel. At 3m 15 degrees the light is 6689 lux at 3200k and at 5600k it is 7511 lux. The link for that information is, https://bhpho.to/3QdxrzK And Arri does not list the Lumens on the light only lux.

Q: 3. Could I mount this on a C-stand or a light stand or do I have to buy a dedicated mic stand?

A: This Mathews c stand adaptor 252038N and the Auray thread adaptor would allow mounting of microphone to a C stand.It is not recommended to do this in a volatile environment; a mic stand is best.

Q: 4. What is the best battery for powering the L7-C LE2 LED Fresnel on location? What accessories are needed to use the L7-C LE2 LED Fresnel like this?

A: While the power option for this light is mainly AC, you could connect it to a generator which is able to hold the power draw of the light.

Q: 5. Does this item include the power adapter? Can this lamp plug directly in a standard US A/C outlet?

A: This light does include a power supply which connects to an AC outlet that works on 100 - 250 VAC.

Q: 6. What is all the differences between Edison and Yoke mount for L7-C LE2 LED Fresnel?

A: The version of this light listed as Edison refers to the plug interface for AC power. The right yoke type depends on how the light will be set up. A manual yoke is used for those mounting the light to a stand. With a pole operate yoke, that would allow you to control the panning or tilting of the fresnel when it is placed out of reach, such as when using it on a ceiling truss or grid.

Q: 7. is this made by sony?

A: These are not SONY products. The microphones are made by Senal and RODE.

Q: 8. where do i connect the xlr cord?

A: The Senal SC-550X will require a pre amplifier and phantom power in order to operate. This can be done with a mixer or other device such as a computer interface, and will depend on your particular application.

Q: 9. What do i need to make it a mic?

A: This kit comes with a mic. The Senal SC-550X Large Diaphragm Condenser and everything else you need to record and edit Voice Overs. It is a complete kit.

Q: 10. Is it Mac & Garageband compatible? I assume so but just checking.

A: The Senal SC550X Cardioid Condenser Mic with USB Dual Audio Interface & Cable Kit is compatible with Mac OS X and garageband.

Pavel	28/08/2024
[powerCON] I use these connectors as a DIY analog of Festool power connector. So, you can have a single cord going to your work area, very short power cords (less than a foot) attached to tools, and quickly connect/disconnect the tools to that one shared power cord. That helps a lot when there is not much space to work in, and makes tools a lot easier to put away. These connectors are surprisingly easy to install, basically just strip the cable and tighten three screws. 5

Ryan	12/08/2024
[14 AWG] I got this to use at our church because I work with volunteers and it's difficult for them to see the difference between a XLR cable and a three pin DMX. The five pins makes it more obvious :o) 5

Ryan	26/07/2024
[0.65 lb] I work with volunteers at a church and few people take the time to read the cable to see if it's audio or data. By using the five pin DMX cables I avoid potential issues of the wrong cable being used. 5

Desi	13/07/2024
[0.65 lb] Great quality. No complaints. Professional grade materials, as expected. 5

Dean	27/06/2024
[powerCON] This was my first experience with a PowerCON connector. I was impressed with the construction and the ease of assembly. Note that you need a T8 torx screwdriver to assemble this. I did not know that and was fortunate to be able to find one. It's not a real common size. 5

Ben	23/06/2024
[powerCON] Used for an extension for an existing DMX run. Works great. 5

Joe	18/06/2024
[14 AWG] Locks snugly. Price point is very good. Overall great connector. Used these to make my own Quasar T-12 power connectors. Saved a ton of money doing it myself. Just be careful. If you put it together, like I did, just to see how it works, you have to use some vise grip pliers to unscrew it. It has a ratchet locking mechanism to prevent it from unscrewing. You'll have to probably reset the metal spring washer, but it's no big deal. This information was hard to find on line. 5