Showcase your setup and streamline your installation process with the Lian Li 011 Dynamic EVO XL Full Tower Gaming Case. Allowing you to customize your setup in multiple different configurations, you can easily obtain the aesthetic you need while supporting a wide range of gaming focused components, suitable for new and seasoned builders.

The 011 Dynamic EVO XL can house a wide range of motherboards including ATX, Micro-ATX, Mini-ITX, and E-ATX motherboards under 11" long. Two internal drive trays can house four 2.5 or 3.5" drives while three dedicated 2.5" trays are located behind the motherboard, allowing you to configure your storage drives to your liking. Eight expansion slots are available for utility and graphics cards up to 18.1" long. The adjustable I/O panel can be moved around the bottom of the 011 Dynamic EVO XL, giving you instant access to four USB-A 3.2 Gen 1 and one USB-C 3.2 Gen 1 port, giving you up to 5 Gb/s data transfer speeds as well as a single 3.5mm combo audio jack. The steel and aluminum structure supports a wide range of interior components safely while the 4mm tempered glass panel wraps around the side and the front to give you a clear view of your components, turning your system into the centerpiece of your gaming room.

ATX, Micro-ATX, Mini-ITX, E-ATX Support    Steel, Aluminum, Tempered Glass    3 x 2.5" Drive Trays    4 x 2.5/3.5" Drive Bays    8 x Expansion Slots    Fan & Radiator Support    4 x USB 3.2 Gen 1 Ports    USB-C 3.2 Gen 1 Port    Supports GPUs up to 18.1" Long    Dedicated Cable Management Space

Derived from the O11D EVO, the O11D EVO XL can be displayed in two modes with just a few simple steps, allowing for a left or right view. In reverse mode you may need an additional extension cable made available through Lian Li.

The front panel includes a built-in ARGB strip that can be customized and tuned to your liking. Dedicated light mode and color buttons allow you to change through various presets with ease.

Keeping style and performance in mind, both the top and side panels of the O11D EVO XL are crafted from aluminum with fine mesh, providing a high-end appearance yet delivering enhanced cooling for your components. The fully open bottom panel, along with three dust filters, ensures uncompromised airflow while effectively keeping dust out of the chassis.

The 011 Dynamic EVO XL can house up to three 120 or 140mm fans at the top, bottom, and side panels of the case as well as up to two 120mm fans on the rear panel for enhanced cooling capabilities. You can also install radiators up to 420mm at the top, side, and bottom of the case as well as custom loops for advanced builders. A hidden mounting point for D5 or DDC pump is accessible by removing the bottom drive cage in both reverse and normal modes.

Various thumbscrews allow you to easily install graphics cards and other components without the need for screwdrivers and other devices. Struggle-free fan brackets use a quick-release design so you can install and uninstall fans quickly. The O11D EVO XL comes with 3 dual-layer cable clips that can be mounted anywhere along vertical grommets pass through, providing versatility for your cable routing plan.

Related Questions and Answers

Q: 1. Do they work with Weebill Lab?

A: These batteries are intended for EVO gimbals. I recommend getting these batteries instead, which are made by Zhiyun-Tech for the WEEBIL LAB and WEEBIL-S: https://bhpho.to/39EN6CA

Q: 2. will this work with the weebill S?

A: This battery is listed for use with the Weebil S.

Q: 3. Does this case come with all the necessary cables and connectors?

A: This case comes with all standard case cables.

Q: 4. Will the Core SWX XL battery charge on a older Anton Bauer charger?

A: Older Anton Bauer chargers like the Anton/Bauer TWIN Simultaneous Charger for Gold Mount Batteries can be an issue with third-party batteries like the Core SWX Nano XL 178Wh Mini Li-Ion Battery (Gold Mount) because of the chip communication the charger has before charging. A newer charger like the Anton/Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output (Gold Mount) is much more forgiving with third-party batteries. See the link below: https://bhpho.to/3sxixuo

Q: 5. Will these batteries work with the Moza Air 2?

A: No, We only recommend using Moza brand batteries for their gimbal models. The EVO batteries may work but we do not guaranty this. Recommended battery is - Moza Li-Ion Battery for Moza Air 2 (4-Pack) BH #MOMCG7

Q: 6. Does it work with freefly movi cinema robot?

A: I just tested them and yes they work in the Movi Cinema Robot. Not all 18650s will fit.

Q: 7. Would these work with flashlights as well?

A: If the flash light accepts 18650 batteries with a button top then yes.

Q: 8. Will these batteries work with the Nucleus-M follow focus system?

A: The EVO Gimbals IMR-18650 High-Capacity Li-Ion 2600mAh Batteries (3-Pack) (B&H# EVO50696) are compatible with the Tilta Nucleus-M Wireless Lens Control System (B&H# TINUCLEUSM). See below: https://bhpho.to/3RZDc2X

Q: 9. Is the connector for vertical installation of GPU included?

A: No, a vertical GPU mount is not included with the Fractal Design Define 7 XL Full-Tower Case (Black, Dark-Tint Tempered Glass).

Q: 10. can this battery be charged via the d-tap?

A: Yes, the Core SWX Nano XL 178Wh Mini Li-Ion Battery (Gold Mount) does allow D-Tap charging. Charger idea: Core SWX 1.5A Single-Position D-Tap Charger BH #COPB70C15US • MFR #PB70C15US