Aruba 8400X 8-Port 40G Qsfp+ Switch Module

Aruba 8400x 8-port 40g Qsfp+ Switch Module

Product Code: eq146817
Availability: In Stock

$91,815.00 $131,295.45

Qty

13 reviews Write a review

Description
Reviews (13)

Customize your installation with the Aruba 8400X 8-Port 40G QSFP+ Advanced Switch Module. Featuring eight QSFP+ slots, this networks switch supports up to 40 Gb/s fiber connections. This module is designed to install into a CX 8400 chassis to fit your needs as your business grows.

Works with CX 8400 Chassis 8 x 40G QSFP+ Ports Modular Design

General
Compatibility	Aruba CX 8400
Inputs / Outputs
Network I/O	8 x 40Gb QSFP+ Ports
Power Source	AC Input
Physical
Mounting	1x RU
Color	Black
Dimensions	16.6 x 11.9 x 1.7" / 42.2 x 30.2 x 4.3 cm
Weight	10.4 lb / 4.7 kg

Related Questions and Answers

Q: 1. Does it work with Pentax cameras?

A: it should but i don't have pentax camera

Q: 2. How to connect to Fuji HS-20 EXR?

A: You will need to buy a cable for your camera and a transmitter sold separately

Q: 3. Is the Capture Pro Module basically a transmitter?If I understand this product right, I can wirelessly use the Pro Module to trigger speed lights with the addition of a Receiver Module with any of the four sensors? Is it also possible to trigger a camera with just the Pro Module and a Receiver Module?Last question, what would the Transmitter Module be used for for from this link, https://a href= http://www.bhphotovideo.com/c/product/1140337-REG/hahnel_hl_captur_n_capture_wireless_shutter_flash_trigger.html target= _blank www.bhphotovideo.com/c/product/1140337-REG/hahnel_hl_captur_n_capture_wireless_shutter_flash_trigger.html/a , is this something I would need to use the Pro Module?

A: from the link provided, the pro module would replace the transmitter, allowing you to trigger from the methods the pro module provides.

Q: 4. I need to freeze action (mountain bikers) in daylight using the sun as backlight and the flash to fill the shadows. From what I have been reading, this will only work at full power, which isn't necessarily an issue, since I'll be out doors I can move the light further or closer to my subject. Is this the best solution for my canon 6D (I know it's not the best for sports but it's what I've got) and pcbuf einstein combo? Right now, it's the cheapest option, besides buying a mirrorless or one of those expensive profoto all in one dealys.

A: Good question, the Einstein will certainly freeze the action at full power under strobe only, but if your only using it to fill in shadows then I doubt it will work as the maximum sync speed is pretty much limited to 1/250th they say 1/400th but i've never had any luck with that. And if your just filling in the shadows you will get too much motion if the bike is at spped.

Q: 5. I understand the IR beam transmitter can be set to a high or low setting. Does the transmitter go into a low power stand-by mode when not being activated? For example, if this was set up over-night would the battery quickly drain? Thanks!James B.

A: I would recommend not keeping the device on while it is not in use.

Q: 6. How wide is the IR beam? If someone could tell me how many degrees wide it is or just a good guess that would be great. Any information would be greatly appreciated.Thanks!James B.Thanks!

A: The beam width from the transmitter varies depending on the power setting and the distance to the receiver.For example, if the distance to the receiver is about 20 feet and the transmitter power is at high, the angle of width is about 30 degrees. Closer it is wider. On the low setting, it is about 10 degrees or less. Aiming it is not an issue. As for breaking the beam, it is a very narrow zone like less than 1 degree in each direction. Basically, the subject has to break line of sight between the transmitter and receiver.

Q: 7. Is this v3 quieter than the v2 I purchased, which at over 35% makes loud buzzing sounds?

A: The edelkrone Slide Module v3 is quieter than the v2.

Q: 8. Will this work with A Fujifilm x100T?

A: You would need to purchase the Impact Shutter Release Cable for Canon Cameras with Sub-Mini Connector, B&H # IMC2.5CANSM, to connect the hahnel Captur Pro Module to the Fujifilm X100T Digital Camera. With the above cable, yes, it would be compatible for your usage needs.

Q: 9. Compatible with Fujifilm HS-20 EXR?

A: Yes

Q: 10. Is it safe to run the motor while controlling a fluid head on top at the same time?

A: That is not something we would recommend. It is possible, but it may not work very well.

Stewart	24/09/2024
[AC Input] I bought this to replace another brand that only worked for about six months. Having a switch that did not force auto sensing was mandatory for me. This is the only one that I could find like this without spending hundreds of dollars. In reading some reviews it was confusing how it really worked so I called IOGEAR first. They confirmed default is not to auto switch plus they told me about software their parent company has for free that lets you configure the unit without the serial commands, so I was please with their customer support. So far it has been working very good and the switching is a lot quicker than my old one was. And of course B&H had a good price and shipped it out same day. 5

Aaron	14/09/2024
[Black] This is exactly what we were looking for in our office. Unlike most other HDMI switches, there's a button for each input, rather than one button that cycles between inputs. This means that you switch to the desired input with one button press - much more logical design for everyone to understand. It also seems to be solid and well-made. 5

Rick	04/09/2024
[AC Input] Integrates with harmony too 5

brian	19/08/2024
[Black] Upgraded to this model from my previous IOGEAR 4kx2k 4 port HDMI switch (smaller unit, push button, w/ remote). That model treated the display as a usb type connection - all my windows would move back to the main monitor when I would switch computer sources. This model - the windows remain!!! No more rearranging! 5

Matthew	24/07/2024
[AC Input] This was easy to setup and just as easy to use. No noticeable signal loss. 5

Chelsea	24/07/2024
[AC Input] I got this for my husband's media setup. He has at least 6 game consoles and a soundbar all on one tv. It took us a couple tries, some troubleshooting, and some googling to get it working (follow the included quick start guide! The order you plug things in MATTERS!), but it's been working great since. The main problem we had was that the soundbar wouldn't work, even though its HDMI was plugged into the tv and not the switcher. Changed the soundbar hookup from HDMI to optical and that did the trick! 5

James	18/07/2024
[Black] HDMI Switch allows our church to select different inputs for our LED wall depending on whether we're running a Sunday morning or if we're having a Youth event, or even if we have a guest speaker , etc. Worked without fail first time and every time we power it on. 5

Gary	09/07/2024
[AC Input] Super easy hook up, good quality feel to the unit. Very easy operation and a happy client. 5

Nishith D.	04/06/2024
[AC Input] Works great. Only challenge is power saving on connected devices, so as long as you disable that, switching works great. 5

Stephen	17/05/2024
[Black] Works perfectly driving my monitor from either my MacBook Pro or my Mac Studio. Automatically switches when either is powered up, or switch input manually. One note: I had trouble with mix/match outputs from computers ie one usb-c/ one hdmi) , but changing both to usb-c made all good. 5