Ashly Protea Ne24.24Mt Dsp 12X8 I/O Matrix Processor

Ashly Protea Ne24.24mt Dsp 12x8 I/o Matrix Processor

Product Code: eq146851
Availability: In Stock

$8,547.00 $10,341.87

Qty

16 reviews Write a review

Description
Reviews (16)

Control and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I/O and functionality. This model includes two 4-channel input cards and one 4-channel output card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

Standard I/O: 4 Inputs & 4 Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Option Bays for Expanded Functionality Windows Compatible

General
Compatibility	Not Specified by Manufacturer
Frequency Response	20 Hz to 20 kHz (±0.25 dB)
THD	<0.01% at 1 kHz, +20 dBu
Dynamic Range	>110 dB (20 Hz to 20 kHz) Unweighted
Signal to Noise Ratio	<-90 dBu Unweighted
Inputs / Outputs
Audio I/O	2x Block 6-Pin Line Input 2x Block 6-Pin Line Output
Inputs/Outputs	Input: Active Balanced, 18 Kilohms Input Gain Range: -50 to +12 dB, Selectable Polarity Output: Active Servo Balanced, 112 Ohms Input/Output: Level +20 dBu (Max) Output Gain Range: -50 to +12 dB, Selectable Polarity
Input and Output Connectors	Logic Inputs (Preset Recall): 9-Pin Block 0-5V Remote Level Control: 10-Pin Block Controller Interface: 4-Pin Block
Network	10/100 Ethernet Port RS-232 Port
Wireless
Mobile App Compatible	No
Power
Power Source	AC Input (Included)
AC Input Power	90 to 240 VAC, 50 / 60 Hz
Power Consumption	40 W
Environmental
Environmental Resistance	No
Operating Temperature	40 to 120°F / 4 to 48°C
Physical
Color	Black
Dimensions	19 x 8.5 x 3.5" / 48.3 x 21.6 x 8.9 cm
Weight	12 lb / 5.4 kg

10/100 Ethernet & RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
Mic/line inputs
24-bit A/D–D/A audio resolution
Up to 24 channels of audio processing
4x4 base unit configuration
Expand inputs or outputs 4 channels per module
Modules easily field installable
Euroblock connectors for audio, preset recall, DC remote level control, and data in/out
31 preset locations
Remote controls for level, preset recall, and programmable functions
Third-party control-friendly
Input and output metering viewable in dBu
Multilevel security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
- Advanced gate controls
Gain
EQ:
- 15-band parametric
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

Related Questions and Answers

Q: 1. Does this product support PAL HDMI transmission or only NTSC?

A: It will support NTSC frame rates only.

Q: 2. Will this lightning it be compatible with my Canon 6D Mark II? If not, will I need to order wireless transmitters for the flash?

A: The Photogenic Matrix MCD400R 400Ws Monolight 3-Light Kit includes an integrated 16-channel receiver in each monolight. The kit comes with a 16-channel remote transmitter which is compatible with your Canon 6D Mark II. Please note that this is a manual flash kit, and therefore does not have TTL functionality.

Q: 3. So it’s a case that only fits the IPhone 15 variation? What happens when apple changes their phone specs the product is obsolete

A: The Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, can technically fit any phone within the same dimensions as the iPhone 15 Pro and the 15 Pro Max, but it has been released specifically to work with the iPhone 15 Pro and the 15 Pro Max due to their best-in-class OLED display and Apple's A17 system-on-a-chip, which can decode the camera sensors' image to display it on the iPhone's OLED display. Whether or not it will support future iterations of the iPhone is something we could not speculate on. This would be something completely up to Atomos as the designer and manufacturer of the product.

Q: 4. does this product has a 3C certification for export compliance?

A: The Roland VP-42H is made in Japan (not China) and lists a CAN ICES-3 (B)/NMB-3(B) compliance. https://proav.roland.com/global/products/vp-42h/

Q: 5. Would Godox AD600BM strobe fit into this beauty dish?

A: Being that this beauty dish has a Bowens S mount, it can fit the AD600BM monolight.

Q: 6. Is this product only compatible with iPhone 15 Pro or Pro Max?

A: The Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, is compatible with both the iPhone 15 Pro and iPhone 15 Pro Max.

Q: 7. Can you use LUT's with this product?

A: The Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, does not support using LUTs at this time.

Q: 8. Will the Teranex 2D convert NTSC to PAL or PAL to NTSC?Thanks

A: Yes, of course. You can visit Blackmagic's website and download the user manual. It contains everything the Teranex 2D can do and how to do...

Q: 9. Is it 110V or 220V or free volt?

A: ALL CPP3 machines sold in the USA are made to use native 110V mains power. This answer is provided by CatLABS - the Jobo distributor in the USA.

Q: 10. Can you use this in photo mode as well as a monitor for precise focusing?

A: At the time of this message, the Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, does not offer a photo mode.

Kenny	22/09/2024
[Black] Great price for the package! And it got here very fast! Thanks 5

TravisH	11/09/2024
[Black] I use this product in our committee rooms, legislative house, and senate chambers. It is very easy to add and network together for the perfect control. It would be nice to have a web connect feature for internet remote access control (hint, hint). 5

Ioannis	27/08/2024
[40 W] Adding this card to Ashly Digimix24 will release the full power of the mixer, allowing you to use all input/output channels in your PC/DAW/iPad. It works flawlessly, and my only minor complaint might be that the latency is not as low as e.g. my RME UCX, but still in the very close to it and in the unnoticeable side of things (about 5-6mS full duplex). This also has to do with the sample rate used (48KHz), while UCX can go up to 192KHz, which reduces latency further. All things considered, I suggest Ashly USB-32 without a second thought! Service of B&H was also awesome, arriving to the other end of the world (New Zealand) in very short time and without issues! 5

Paul	22/08/2024
[40 W] I have an original K10 and the addition of the K8.2 is very welcome. the K8.2 delivers great balance between brilliant highs and tight, round low end with a nice punch of power. all in a small user friendly package. 5

Moshe S.	22/08/2024
[Black] A good speaker with excellent quality sound. 5

Mirek	22/08/2024
[40 W] Works very well 5

Ruess,	17/07/2024
[40 W] Trying to 'down-size' my live keyboard rig. Agonized about whether the 8 speakers would have enough depth to them. They work perfectly for my use (moderate volume band, piano/organ/synth - all sound great). 5

Christopher	15/06/2024
[Black] A fantastic kit — Powerful little speakers. Light enough to easily carry them around, and good-quality hardware to connect them. I definitely recommend a subwoofer for these. 5

Kolton	11/06/2024
[Black] Great, works as expected. 5

Tim	07/06/2024
[Black] Nothing in it's price class comes even close. This unit is rock solid, easy to use, and offers great flexibility. It can be used as a delay, crossover, eq, limiters, and many other audio needs. With 4 ins and 8 outs, the setup can be almost endless. You can use outputs 1 & 2 as Master LR, outputs 3 -6 for delay lines, and 7 & 8 as a biamped monitor send. I would definitely spec and install this unit on any of my installations. 5