Power your speakers with the Behringer NX6000, a 2 RU, two-channel 6000W amplifier with built-in SmartSense impedance compensation technology that delivers a linear response at any speaker load impedance. The amplifier also features a zero-attack limiter that provides maximum output level with exceptionally reliable overload protection.

The NX6000 delivers 2 x 3000W into 4 ohms and 2 x 1600W into 4 ohms, giving you flexibility when deploying your sound system. Inputs are available via two combo XLR-1/4" inputs, while the speaker outputs utilize NL4 speakON speaker connectors. A power cord is included.

Two-Channel Amplifier: 2 x 3000W    3000W at 4 Ohms; 2 x 1600W at 8 Ohms    Class-D Amplifier    SmartSense Impedance Compensation    All Controls Available from Front Panel    Two Combo XLR-1/4" Inputs    Two NL4 speakON Outputs    Includes Power Cord

• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with near-zero thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption
• Built-in stereo crossover with low-cut, high-cut, and full-range mode
• SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
• Zero-Attack limiters offer maximum output level with reliable overload protection
• Detented and illuminated gain controls for precise level setting
• Precise 4-segment Signal and Limit LEDs to monitor performance
• XLR and 1/4" TRS combination input connectors for compatibility with any source
• Professional twist-lock speaker connectors for ultimate reliability
• Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• Back-to-front ventilation system prevents thermal buildup for reliable operation

• The front-panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights show the amp is ready for action. All channels feature positive-detent gain controls with LEDs that light when a signal is present, and limit LEDs to indicate when the amplifier is running at full capacity.
• The rear panel is home to the combo XLR and 1/4" TRS Input connectors, making the NX6000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.
• The rear panel is also where you'll find the switches that enable the NX6000 amp to run in your choice of dual mono, stereo, or mono bridge modes. The NX6000's built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channeled to your full-range loudspeakers.

Behringer's latest SmartSense Technology puts the punch back into Class-D amplification, providing a vastly improved full-range frequency response with powerfully dynamic bass and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX6000's design also incorporates a significantly higher damping factor that yields better amplifier control over the loudspeaker, for stronger audio reproduction especially in the low frequencies.

Related Questions and Answers

Q: 1. Can I connect this to the headphones out of my Allen & Heath ZED-10FX mixer?

A: Absolutely, using this amplifier with a Zedi-10 mixer now.

Q: 2. Please explain the mono switch. What I'm looking for his a device that will mix the stereo channels into mono and deliver the mono signal to both headphones channels. Can this unit do that?

A: The stereo/mono switch sums the stereo input to mono. In this mode all headsets connected will be fed a mono signal. (Same signal to both left and right).

Q: 3. Anyone using this with a turntable?

A: This integrated amplifier offers a dedicated RCA phone input for use with turntables without built-in phono preamps. Turntables with a phono preamp switch may be used also.

Q: 4. Power Supply for 110v or 220v ?

A: The power supply is marked 12O Volt 60 Hz. ..so, no, it won't work on 220-240. However, the output is marked 12V dc 150mA. The connector on the end of the cord is the standard small item plug that fits all kinds of small electronic items, including external hard disk enclosures. There are MANY inexpensice power supplies on the market (or you may have some lying around) that put out 12v dc and at least 150 mA. If you find one that puts out more than that, is should be just fine. ...just not lower than 150mA. You do need decent quality to prevent hum. B&H may sell one, or look on eBay. ..for a p.s. that for input 110 and 240 Volts, and 50 / 60 Hz. ..so you can use here (U.S.) or in Europe, wherever. The sound from this compact amplifier is quite clean. i use for video voice over, and have NO complaints.

Q: 5. Can this play all 4 speaker channels at once?

A: Yes, you can run all four output channels at the same time.

Q: 6. Does this work over seas

A: The included 12 VDC supply is 120 VAC 60 Hz only. It is not compatible with most electrical systems outside North America.

Q: 7. Would it be possible to hookup a subwoofer to this receiver? Thank you Bob

A: Yes, this unit has a stereo RCA subwoofer pre-out. You can connect 1 or 2 powered subwoofers.

Q: 8. Can we use 220 volts

A: Yes. This unit's voltage selector range from 110 v to 220 volts.

Q: 9. Can you daisy chain two of these? I have one already and need more outputs.

A: Sure you can.

Q: 10. Is this supposed to work with 3.5mm headphones?

A: Yes, each channel has both 3.5mm stereo TRS and 1/4" stereo TRS headphone outputs.