The white Da-Lite Tensioned Advantage Deluxe Ceiling Screenfrom Da-Lite Tensioned Advantage Deluxe Ceiling Screenis designed to be concealed neatly in a ceiling when not in use, which makes it ideal for corporate conference rooms. The screen can be installed in two stages; the screen case can be installed during construction, and the screen assembly can be attached during the finishing stage. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets allow you to attach the screen housing to the structure above the drop ceiling. Closure doors keep the screen out of sight when it isn't being used.

The HD Progressive 1.1 Perf surface has a 1.1 gain, 170° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The white surface offers true color reproduction and fidelity. The perforated vinyl surface allows for the installation of speakers behind the surface. HD Progressive 1.1 Perf can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified. Each side of the material uses a tab guide cable system to maintain even lateral tension and hold the surface flat. This helps to ensure that pixels from the display image don't overlap with one another. Tensioning also helps to prevent creases or folding of your screen. A custom slat bar with added weight maintains vertical tension on the screen surface.

For controlling the screen, a three-position Decora-style wall plate is included, along with a cover switch. Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you are using an IR or RF remote to control your screen. The video projector interface provides DC controls that allow you to control the screen by simply turning your projector on or off. The screen will descend when the projector is turned on, and retract back into the case when the projector is turned off. Your projector must have a 12V or 5V lead to operate the interface (cable not included).

106" Diagonal    16:9 Aspect Ratio    HD Progressive 1.1 Perf Surface    1.1 Gain, 170° Viewing Angle    Black Backing on Surface    Tensioned for Flat Image Display    220-240 VAC, 50 Hz Motor    Three-Button Decora-Style Wall Switch    Includes Control Through Projector

The screen has two motors, both mounted inside the case. One motor operates the door at the bottom of the case, and the other controls the viewing surface.

The electrical junction box is internally integrated into the housing, making it possible to install the housing, and then wire to the building's electrical system during construction.

Smooth Roll Technology to keep your screen flat.

Slim-Tab, a lower profile, and strong tab design to keep your screen taut.

White powder-coated case with white endcaps and closure doors for a clean aesthetic.

The case is UL Plenum rated.

Related Questions and Answers

Q: 1. can we coonect this to the preout of denon x4500H or x3600H ?

A: Yes, you can connect to one of the zone pre amp outs, or if you're going to use this to power rear speakers you can come out the surround pre amps. You have quite a bit of flexibility with the Denon receivers.

Q: 2. can I use my Music Hall 5.1 turntable directly into this unit? So the Q is... does the AMP have phono pre-amp?

A: No, this amplifier does not have a phono stage pre-amp. You would need a dedicated phono preamp. Music Hall makes some very high quality ones to go with their turntable. Such as, the Music Hall Bellari vp130 mk2 Tube Phono Preamp with Headphone Amplifier for Moving-Magnet Cartridges. https://www.bhphotovideo.com/c/product/1483524-REG/music_hall_vp_130mk2_tube_phono.html

Q: 3. Are these the Sonance/Sonos 6" or 8" speakers?

A: The Sonos In-Ceiling by Sonance (Pair), B&H # SOINCLGWW1, includes 6" speakers.

Q: 4. Can the Sonos amp be used with powered speakers?

A: The Amp unfortunately does not have a RCA Audio Output, only Input. It is only able to be connected to Passive Speakers via Speaker Wire.

Q: 5. Is it possible to add extensions to the poles to extend the length?

A: The manufacturer does not advise adding extensions to the Mount-It! Dual-Screen Heavy-Duty Ceiling Mount (Back-to-Back), BH # MOMI20104.

Q: 6. "Adjustable bass and treble controls let you adjust your sound performance. Volume can be adjusted". These words are right from the description. But I don't see these controls on the device. How do I do these adjustments?

A: As with all Sonos products, the Sonos Amp 2.1 is controlled through the Sonos application on your smartphone or tablet.

Q: 7. does this adapter come in a set of 2?

A: Unfortunately, this adapter is only sold individually.

Q: 8. We have a Samsung TV with Sonos Beam and would like to add two un-powered, wired speakers to create surround sound and to stream music. Would this amp work?

A: Yes, this is what you would use for your particular set up.

Q: 9. Would this be sturdy enough to hold a roll of seamless paper?

A: These are designed to be used with the Impact Varipoles. The Varipoles support the actual weight of the roll.

Q: 10. What are the dimensions of this screen? H x W?

A: The Elite Screens Evanesce B Series 16:9 In-Ceiling Electric Projection Screen (100"), BH # ELEB100W3E12, features overall dimensions of 67.8 × 97.3 × 4.3 inches.