The white Da-Lite Tensioned Advantage Deluxe Screen 58 x 104"from Da-Lite Tensioned Advantage Deluxe Screen 58 x 104"is designed to be concealed neatly in a ceiling when not in use, which makes it ideal for corporate conference rooms. The screen can be installed in two stages; the screen case can be installed during construction, and the screen assembly can be attached during the finishing stage. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets allow you to attach the screen housing to the structure above the drop ceiling. Closure doors keep the screen out of sight when it isn't being used.

The HD Progressive 1.1 Perf surface has a 1.1 gain, 170° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The white surface offers true color reproduction and fidelity. The perforated vinyl surface allows for the installation of speakers behind the surface. HD Progressive 1.1 Perf can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified. Each side of the material uses a tab guide cable system to maintain even lateral tension and hold the surface flat. This helps to ensure that pixels from the display image don't overlap with one another. Tensioning also helps to prevent creases or folding of your screen. A custom slat bar with added weight maintains vertical tension on the screen surface.

For controlling the screen, a three-position Decora-style wall plate is included, along with a cover switch. Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you are using an IR or RF remote to control your screen. The video projector interface provides DC controls that allow you to control the screen by simply turning your projector on or off. The screen will descend when the projector is turned on, and retract back into the case when the projector is turned off. Your projector must have a 12V or 5V lead to operate the interface (cable not included).

119" Diagonal    16:9 Aspect Ratio    HD Progressive 1.1 Perf Surface    1.1 Gain, 170° Viewing Angle    Black Backing on Surface    Tensioned for Flat Image Display    110-120 VAC, 60 Hz Motor    Three-Button Decora-Style Wall Switch    Includes Control Through Projector

The screen has two motors, both mounted inside the case. One motor operates the door at the bottom of the case, and the other controls the viewing surface.

The electrical junction box is internally integrated into the housing, making it possible to install the housing, and then wire to the building's electrical system during construction.

Smooth Roll Technology to keep your screen flat.

Slim-Tab, a lower profile, and strong tab design to keep your screen taut.

White powder-coated case with white endcaps and closure doors for a clean aesthetic.

The case is UL Plenum rated.

Related Questions and Answers

Q: 1. Will this Lens cap fit Canon Powershot SX530HS?

A: The Canon E-58 II 58mm Lens Cap will not fit the Canon PowerShot SX530 HS Digital Camera. If you need a replacement lens cap you would need to get the Canon Filter Adapter FA-DC67A and a 67mm lens cap instead.

Q: 2. Is this the correct size for my Canon Vixia HFG30?

A: The Canon E-58 II Lens Cap is the correct cap for the Canon VIXIA HF G30 Full HD Camcorder.

Q: 3. Will this fit the Canon EF 28-70mm f3.5-4.5 II Lens (1988)?

A: No, you need a 52mm lens cap. click the link below to view; https://www.bhphotovideo.com/c/product/883410-REG/Canon_6315b001_E_52_II_Lens_Cap.html

Q: 4. Does this lens cap fit my sx50hs ?

A: Your Canon PowerShot SX50 HS needs the Canon Filter Adapter FA-DC67A B&H # CAFADC67A to take 67mm filters and lens caps. Here is the correct one for you. Canon E-67 II 67mm Lens Cap B&H # CALC67.

Q: 5. How many lumens is this light?

A: Unfortunately, the manufacturer does not publish a lumens output for this LED panel.

Q: 6. Will this lens fit the 18-55 lens that came with my Canon Rebel T3i?

A: Yes, but here's how you can check for yourself. Look at the front of the lens. It will say on the inner front ring that it is a Canon Zoom Lens EF-S 18-55mm. As you read around the lens you will get to a theta (greek symbol) and 58mm which indicates the diameter of the lens. SO, you need a 58mm lens cap AND 58mm lens filters.

Q: 7. Please Confirm it is new not remanufactured and Canon brand?

A: This is new in a box original Canon toner.

Q: 8. Does this cap fits a Canon 50mm 1.4 lens?

A: As the Canon EF 50mm f/1.4 USM lens uses 58mm filter threads, yes, the Canon E-58 II 58mm Lens Cap, B&H # CALC58, would be compatible for use with the Canon EF 50mm f/1.4 USM lens.

Q: 9. So does this lens cap fit the lens with the Canon SL2 of the EF-S 18-55mm f/4-5.6 IS STM Lens?

A: Yes it will fit , 18-55mm lens is 58mm thread

Q: 10. Is this cap fits a Canon Macro Lens EF 100mm 1:2.8 USM?

A: If you have L 100mm lens the answer is no , if you have EF non L then Yes