Da-Lite 76014Is Tensioned Motorized Screen 50X67"

Da-lite 76014is Tensioned Motorized Screen 50x67"

Product Code: eq14779
Availability: In Stock

$7,716.00 $10,879.56

Qty

6 reviews Write a review

Description
Reviews (6)

The 120V Da-Lite 76014IS Tensioned Motorized Screen 50x67"from Da-Lite 76014IS Tensioned Motorized Screen 50x67"is suitable for wall or ceiling mounted installations.

84" Diagonal / 4:3 Aspect Ratio Da-Mat Surface 1.0 Gain / 120° Viewing Angle Smooth Roll Technology Tensioning Cable System Decora 3-Position Wall Switch Slim-Tab Low-Profile Design Silent Motor Video Projector Interface

Key Specs
Front/Rear Projection	Front
Aspect Ratio	4:3
Diagonal	84.0" / 213.4 cm
Gain	1.0
Tensioned	Yes
Type
Series	Tensioned Cosmopolitan Electrol
Front/Rear Projection	Front
Aspect Ratio	4:3
Style	Wall and Ceiling
Dimensions
Viewing Area	50.0 x 67.0" / 127.0 x 170.2 cm
Diagonal	84.0" / 213.4 cm
Surface
Gain	1.0
Viewing Angle	120 degrees
Tensioned	Yes
Black Backing	Yes
Controls
Motor	Quiet
Casing
Finish	Veneer
Length	86.0" / 218.4 cm
General
Voltage	120 VAC/60 Hz
Packaging Info
Package Weight	72 lb
Box Dimensions (LxWxH)	92 x 13 x 10"

Da-Mat is a unity gain vinyl surface with a smoother surface than the Matte White finish. It features a white surface for good color reproduction for environments with controllable ambient light. Cone: 120° Gain: 1.0

In-the-roller motor mounting system
Smooth Roll Technology to keep your screen flat
Tensioning Cable System to prevent warping and ensure even lateral tension
Features decora-style, three-position wall switch
Black-backed screen material for enhanced image quality and opacity
Seamless surface
Slim-Tab, a lower profile, stronger tab design to keep your screen perfectly taut

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Related Questions and Answers

Q: 1. could i record the movements between two points (linear, pan, tilt, zoom, focus) and then re-produce that later in next shots?

A: Yes, for the 3 axis of Pan, Tilt and Tracking that this offers you are able to reproduce movements.

Q: 2. How loud are the motors? Can you actually use during interviews? Or is it mainly for b-roll?

A: this is primarily designed for B-Roll and MOS shooting

Q: 3. Is there a replacement for the Matterport Axis remote control?

A: Unfortunately a replacement remote for Matterport Axis Motorized Mount + Tripod is not available for purchase.

Q: 4. Can the 3-axis head talk to the CineMoco? I want the cinemoco to tell the head the distance and want to set key frames on the 3

A: At this time Cinetics does not state compatibility between the Cinetics Lynx 3-Axis Motorized Slider and the Cinemoco.

Q: 5. Does this unit allow slave mode with advanced external intervalometers using an AUX Cable?

A: The Cinetics Lynx 3 Axis Motorized Slider has it's own control system which can use a Cinetics CineMoco Shutter-Release (https://bhpho.to/3Kfblb0) for select cameras, in order to trigger shutter commands. Cinetics recommends using the Cinetics Lynx Controller to control these commands.

Q: 6. This thing apparently requires Matterport Cloud Account, is there a fee for that?

A: One can use the free tier of the Matterport account with the Matterport Axis Motorized Mount + Tripod, but there are paid options that offer additional active spaces and users. Please see the link below: https://buy.matterport.com/plans

Q: 7. Will it work with Sony FS72?

A: I think the FS7 would work better with the 1 Axis Lynx Slider than this 3 Axis kit. It could do some shots well; a horizontal slide for example. But you would want it set up very lightly... small lens, no accessories, and it could struggle with vertical slides. The Lynx kit is more versatile with a smaller camera, like Sony's A7 series.

Q: 8. Will it work with Samsung S22 as I do not think it has Lidar?

A: The Samsung Galaxy S22 is compatible with the Matterport Axis Motorized Mount + Tripod. To view the list of tested devices, please see the link below: https://bhpho.to/3KTYVY2

Q: 9. Can the Axis device be mounted to a standard camera tripod, or do I have to use the Axis one?

A: A standard tripod will work as well. The Axis mount has a 3/8"-16 thread with a 1/4"-20 adapter for mounting on various tripods.

Q: 10. Should i purchase one Cinetics 32" Slider Extension (BH #CIASE MFR #ASE) with one Cinetics 64" Belt for Axis360 Pro Slider (BH #CIA64 MFR #A64) to extend the length?

A: Unfortunately, the Cinetics 32" Slider Extension (B&H# CIASE) is for use with the Axis360 Pro Slider only.

Andreas the squint	26/09/2024
[Veneer] I used this screen in a small conference room and it was very simple to instal. 5

anyonymous	18/09/2024
[Quiet] The screen was simple to mount (we used lag bolts and attached the screen to a wall.) The screen did not come with instructions on how to install the switch for a 120v motor...complicated the electrical install was inconsistent wire colors on the switch and the screen. After consulting an electrician and enduring his derision for working with this product - he correctly intuited the correct wiring configuration. A big thanks to the customer service at B&H. We ordered the screen 2 weeks from a graduation. The shipper lost the screen for nearly a week, without informing us. I contacted the shipper, who responded with a long distance shoulder shrug - explaining they would look for it again. Unable to motivate the shipper, I called B&H - they got involved, and the screen was in my driveway 36 hours later. Thanks B&H. 5

Gab Laughin	17/09/2024
[Quiet] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

iJam	07/08/2024
[72 lb] From an installers point of view, this screen really is nice. Install a top and bottom rail and the screen slides over the rails for an easy installation. The screen snaps to the rear of the frame for a very tidy and clean cut appearance. High quality frame, packaged well, easy to install... a good deal all the way around. 5

petarm	17/07/2024
[4:3] We use the electrol screens almost exclusively in close to a 100 locations. They are versatile and durable. 5

haze_1	02/07/2024
[Yes] I use it in a classroom at a university. It's got a great surface, brilliant white, big and more than I expected. It looks like a big LCD screen on the wall, way cool. 5