Designed for system cases and optimized for airflow and noise, the black Lian Li UNI FAN TL 120mm Black Case Fanfrom Lian Li UNI FAN TL 120mm Black Case Fanfeatures nine fan blades, a fan speed of 200 to 2600 rpm with Pulse-Width Modulation, and Fluid Dynamic Bearing technology that provides stability, durability, and longevity. It generates only 33 dBA of noise, a maximum airflow of 90.1 CFM, and a maximum static pressure of 3.97mm H₂O.

The fan also has 26 LEDs with a side diffuser on each side of the frame. An infinity mirror on both sides of the frame helps showcase multi-layer lighting effects, or customize individual effects on each side of the LED strips. Included is a UNI FAN controller cable (P-7P), an extension cable (P-P), and four screws. Protection is provided by a limited 3-year warranty.

Please note that the controller is not included but is required for use. UNI FAN TL series fans will not function without a controller. Controllers are only included in the 3-pack.

Nine Fan Blades    Dual Zone Lighting Effects with 26 LEDs    Enlarged Infinity Mirror    Pulse-Width Modulation    Fan Speed: 200 to 2600 rpm    Maximum Noise: 33 dBA    Fluid Dynamic Bearing Technology    Daisy-Chain up to 16 Fans per Controller    Anti-Vibration Rubber Pads

• Noise-optimized and performance-oriented fan
• LCP (liquid crystal polymer) fan blades are used for tight tolerance
• FDB bearing with copper shielding to ensure stable rotation of the impeller
• Enlarged infinity mirror around the frame with a longer light guide for a unified daisy-chained look
• Features two light zones for increased lighting customizability
• UNIFAN interlocking system for ease of cable management
• Cable connection is supported on both sides of the fan
• Support up to 10 fans per controller port via a daisy-chain POGO cable
• LED lighting and fan speed controller shared with UNIFAN TL LCD
• Complete software control with L-Connect 3

Building on the design success of the UNI FAN series, the UNI FAN TL series takes clutter-free setups to the next level.

Durable Daisy-Chain Solution
Experience a hassle-free setup with the slide-in daisy-chaining mechanism, securely holding the fans in place and ensuring a snug fit for easy configuration.

Seamless Connection
Featuring both male and female ends, the cable can be connected to both sides of the fan, providing enhanced flexibility and ease of installation.

Note: To ensure that lighting effects are set in the proper direction, set the orientation in L-Connect 3 under Settings > Device.

Well Adapted for Multiple Configurations
Besides the removable interlocking key, TL fans include connection covers for exposed connections at the end to help prevent short circuits while improving compatibility.

10 Fans In a Row and up to 16 Fans
Connect up to 10 fans to a controller port using the extension cable, which offers users the ability to create up to 4 clusters in a chain. Each cluster supports a maximum of 4 fans for individual customization of fan rpm and lighting, allowing a truly personalized build setup such as having 3 fans on the top, 3 on the side, 3 on the bottom, and 1 on the rear.

The UNI FAN TL is engineered for high performance with minimal friction and vibration, ensuring quiet operation, even at high speeds.

Liquid Crystal Polymer (LCP) Fan Blade
Ensures tolerance for high speed operations.

Metal Bearing Shell
To securely hold the impeller to the shaft.

Magnetic Frame
To provide extra support for fan blades.

Stator
To provide a rotating magnetic field that generates momentum.

Brazz Nut
To prevent oil leaks.

Fluid Dynamic Bearing (FDB)
To effectively reduce the internal friction for improved durability.

Copper Shielding
To reinforce the shaft and ensure stability at high-speed operation.

Thicker Fan Frame
28mm thick fan frame helps deliver more airflow and static pressure.

Rubber Pads
To reduce vibrations and maintain extremely low noise levels.

Crafted with LCP material, the UNI FAN TL has a larger 9-blade impeller, with tight clearance to the fan frame, which ensures efficient airflow while minimizing acoustic levels for cooling.

You're able to set different fan speeds for each fan cluster to optimize different scenarios of use, providing flexibility for radiator or case fan needs with L-Connect 3.

Redefining the visual appeal of high-performance cooling, the UNI FAN TL fans integrate elements of SL-INF and P28, ensuring a striking look without compromising on performance. This fan has an airflow rating of 90.1 CFM, a static pressure of 3.97mm H₂O, 33 dBA of noise, and a variable speed of 200 to 2600 rpm.

Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.

Illuminate your setup with the UNI FAN TL's enlarged infinity mirror (30% larger than UNI FAN SL-INF on the side) on both sides of the frame, showcasing clear and 0.7mm gap multi-layer lighting effects.

Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of them.

Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.

L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting effects, fan speed, and LCD screen.

UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a maximum of 6 TL LCD fans.

Note: TL and TL LCD share the same controller but use different controller cables. Do not mix the controller cables.

Each port supports a maximum of 10 TL fans or 3 TL LCD fans, but the 1st port doesn't support TL LCD. The PCIe power cable powers up the connected fans, a USB cable plugs directly into the motherboard's 9-pin USB header, and the 5V ARGB/4-pin PWN cable is required for motherboard sync functionality.

Note: Do not use a splitter; plug directly in for a stable signal.

Related Questions and Answers

Q: 1. How is it installed? Does it connect to your home's HVAC duct system?

A: The installation instructions for the AC Infinity CLOUDLINE T6 Inline Mixed-Flow Duct Fan System (6") can be found on pages 09-13 of the manual, which can be found here: https://bhpho.to/486sXSE.

Q: 2. Can you use this as a shoulder strap?

A: I can use it as a shoulder strap butI was surprised that there isn't much length to play with. I am 5'6 and weigh 145lbs. So I'm fairly small framed. I can put it over my head so it goes across my body and swivel it from front to back with it adjusted to full length.

Q: 3. does this harness come in sizes larger than regular?

A: The OP/TECH USA Dual Harness also comes in an X-Long size: http://bhpho.to/1wiohk5

Q: 4. Will this strap attach to a Sony FE 200-600 zoom lens?

A: Yes, but we usually suggest the following models as they support more of a payload OP/TECH USA Envy Strap (Black) BH #OPESB • MFR #3801332 https://bhpho.to/3Wt4DDj

Q: 5. Will this work with the mini QD extension set? (Are all of the Optech QDs the same size?)

A: My error and I do apologise. OP/TECH USA does have two sizes of their QD or Quick Disconnect connectors. If you wish to extend the OP/TECH USA Super Classic Strap-Uni Loop (Black) B&H # OPSSUL, use OP/TECH USA Extra Long Extension Connectors, 2-Pack (Black) B&H # OPSCEXL MFR # 1301092. As you have found the Mini QD are too small and will not work. Again, please accept my apologises.

Q: 6. Will this work with a Nikon D7500?

A: Yes, the Super Classic Uni Loop will work with your D7500. If the connection area is tight, you may need to use a piece of heavy thread or dental floss to pull the Uni Loop through the connection point rather than trying to push it through.

Q: 7. What is the length of the neoprene part of this strap?

A: The strap is adjustable from 36.0 to 43.0" / 91.4 to 109.2 cm

Q: 8. Can it be used for a range hood in-line exhaust fan?

A: The AC Infinity CLOUDLINE T6 Inline Mixed-Flow Duct Fan System (6"), BH # ACAICLT6V2, is not designed to be used as a range hood.

Q: 9. This harness is great when I want to carry two cameras, but not when I only want to carry one. Is there an accessory strap for when I only want to carry one camera? I would love a wrist strap or any strap for that matter that attaches to the straps on my camera. I hate having to attach and remove the straps from the camera.

A: I solved this problem by purchasing the following three OP/TECH USA items:-System Connctors, Uni Adapter Loop (B&H# OPSCUAL Mfr# 1301012)-Classic Strap (B&H# OPSCB Mfr# 1001252)-System Connectors (Uni Loop) (B&H# OPSCUNL Mfr# 1301062)I supplemented the security of the system by the use of two sets of OP/TECH USA's System Connctors, Secure-Its (B&H# OPSCSI Mfr# 1301042)With these items, you install the Uni Loops on each of the cameras once. Then you can switch between single strap or double harness just by using the quick-connects. The Secure-Its ensure that the quick-connects don't become quick disconnects!I hope this helps.

Q: 10. Does the strap length listed (36.0 to 43.0") include the length of the connectors or will those add extra length?

A: The length is listed including the Uni Loop QD Connectors.