Designed to be the perfect partner for amp modeling devices and large pedalboards, the FRFR-112 MKII Powered Cabinet from HeadRush offers pure tone reproduction and an exceptional amount of power for even the largest stages and rehearsal spaces. Sporting 2500W peak power output and a 12" woofer with 1" compression driver configuration, the FRFR-112 MKII stays true to its name: full range, flat frequency response.

Built-in Bluetooth 5.0 connectivity is a convenient option for providing wireless streamed music from your mobile device during set breaks or rehearsals. Two XLR-1/4" combo jacks with independent volume controls are available, and you also get an XLR mix output for chaining speakers or sending audio to a live sound system for a front-of-house mix. A high-pass filter switch helps reign in muddy stage mixes or excessive low end, while a ground-lift switch makes it easy quash electronic noise without external gear. Rugged and compact, the cabinet is offered in a wedge shape for perfect stage placement, is light enough to be easily carried, and allows for horizontal, vertical, or pole-mounted placement. The FRFR-112 MKII includes a power cable.

For Guitars, Basses, and Amp Modelers    12" Woofer, 1" Compression Driver    2500W Peak Power Output    Bluetooth 5.0 for Wireless Streaming    Two XLR-1/4" Combo Input Jacks    One XLR Mix Output    HPF Switch for Muddy Stage Mixes    Ground-Lift Switch for Electronic Noise    Rugged, Compact, and Pole Mountable    Includes Power Cable

If you’re new to FRFR amplifiers, FRFR stands for full-range flat-response. This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true amp in the room sound without coloring it as a traditional guitar amp would. The FRFR-112 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal, or jam session. 

FRFR-112 MKII outputs a massive 2500W watts (peak), which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 12" woofer and 1" high-frequency compression driver, the FRFR-112 MKII delivers a precise and full response across the entire frequency range without any artificial coloration—critical to getting the most out of your amp modeler. The FRFR-108 MKII's performance is exceptional, with a max SPL of 131 dB and a 44 to 20 kHz frequency range.

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other. FRFR-112 MKII has a HPF switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix.

Unwanted electrical noise can also be a common problem. FRFR-112 MKII's ground-lift switch can eliminate hums and buzzes resulting from ground loops.

FRFR-112 MKII is rugged yet lightweight and easy to transport at 34.7 lb / 15.7 kg, making one-trip load ins at the gig or rehearsal space easier than ever. While you can use FRFR-112 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it. This is especially helpful at outdoor gigs or other places where the PA backline is limited.

Related Questions and Answers

Q: 1. Can I know where is the product made?

A: Our current stock is from China.

Q: 2. Does this interface work with Beyerdynamic DT 990 Pro (250ohm)? Does the interface have an amp or do I need a separate one to make the headphones work?

A: Yes, the Audient iD4 MKII Desktop 2x2 USB Type-C Audio Interface has a built-in headphone amplifier that will accommodate the Beyerdynamic DT 990 Pro headphones without the need for a separate headphone amp.

Q: 3. What is length: end-of-snapclip to end-of-snaoclip?

A: The strap's length is 20.75 (52.71 cm)

Q: 4. does this interface work with Beyerdynamic DT 990 Pro 250 version?

A: These headphones will be compatible with the headphone output of this interface, but due to the headphones' impedance you may need to turn the volume up higher than usual if you are not using them with a separate headphone amplifier.

Q: 5. What is the frequency response range for this cabinet?

A: The frequency range of the HeadRush FRFR-108 MKII 1x8" 2000W Full-Range Powered Cabinet is 52 Hz – 22 kHz (-10 dB).

Q: 6. Is it ok to store in the cabinet my camara lens inside their soft cases and pouches or will I negatively affect the moisture protection provided by the cabinet?

A: You can store the lenses in their cases, but it is not necessary when using this cabinet.

Q: 7. What's the voltage range? Can it be used from 110-240?

A: Mine is plugged into a standard 110V wall outlet.

Q: 8. What type of cable is needed to connect a modeler to this cabinet - i.e., instrument cable or speaker cable?

A: The HeadRush FRFR-108 MKII 1x8" 2000W Full-Range Powered Cabinet accepts mic input via XLR, and line input via 1/4" TRS. It does not accept instrument level input.

Q: 9. Will a 70-200 2.8, 85mm prime and another lens fit?

A: This cabinet would be too small, I would recommend the 80L cabinet.

Q: 10. How many Lenses and Cameras can it hold?

A: depends on the size of the cameras and lenses