ARRI L5-C Plus RGB LED Fresnel Light with Switch Kitcontinues to expand its LED spotlights with the introduction of the black L5-C Plus RGB LED Fresnel Light. Featuring a pole-operated yoke, the L5-C Plus has a flood-to-spot capability with a beam angle adjustment of 12-46°. The Plus version adopts the uniform, homogeneous light field of its predecessor, while providing up to a 90% increase in output. Similar in size and weight to its previous version, the upgraded L-Series Plus has a new RGBW light engine and firmware technology, operating on the same software as the brand's SkyPanel. Other improvements include direct network connectivity for LAN input and control via Art-Net and sACN protocols. Users will also appreciate simplified onboard control thanks to a familiar and intuitive interface.

For Film, Broadcast & Video Production    Output: 48,900 Lux at 3.3' (12°)    2800-10,000K CCT; RGB    Beam Angle: 12-46°    AC Power    CRI 92 | TLCI 83    Onboard, DMX, Art-Net & sACN Control    IP20 Rated    Includes Combo Pin    23' Power Cord with Switch

Designed as the brightest ARRI full-color Fresnel fixture, the L5-C Plus has a 5" light aperture that offers an increased output up to 90% depending on your settings, such as beam angle and CCT. This fixture has a peak intensity of 48,900 lux at 3.3' (spot beam at 5600K).

The 100-0% dimmable L5-C Plus is a "fully tunable" white light source, allowing you to match existing fixtures with color temperatures from 2800 to 10,000K. The onboard controller allows full minus green to plus green adjustment as well as RGB+W color gamut color mixing with hue and saturation control, enabling matching of specific shades and skin tones. A wide selection of gels are available as well. CRI of 92 and TLCI of 83 ensure color accuracy.

All functions can be controlled via DMX, an ideal feature for broadcast studios, while RDM permits monitoring of the light's status. Control and configuration are extended via Art-Net, sACN, and web page control of light and settings via HTTP.

Power options include the L5-C Plus's 100-240 VAC onboard power supply. A required power cable does not come with this light and needs to be purchased separately.

A key element of the versatility of traditional Fresnels is the ability to spot and flood the beam as needed. Whether it's a flood field for a pullback shot or a tight spot for a bright highlight, the continuous focus-ability of the L-Series Plus lives up to your expectations. And, unlike traditional Fresnels, which have significant light waste in spot focus, the efficient L-Series Plus optical system maintains the same field lumens in all focus positions.

Clear, defined shadows have traditionally been solely a trait of single source tungsten and daylight fixtures. ARRI L-Series Plus Fresnels provide the same single shadow properties lighting designers expect, delivering natural results.

The ARRI sliding stirrup design enables precise adjustment of the fixture's center of gravity, to compensate for front-end accessories. It also gives the option of pulling the fixture back and reducing its hanging height.

Two focus knobs provide the precise adjustment and rapid flood-to-spot that users enjoy from manual, mechanical control. Knobs on both sides of the fixture ensure easy access from all positions, eliminating the need for awkward reaching around the fixture.

The strong tilt-lock provides extremely secure locking, eliminating movement and slippage and ensuring that the fixtures will stay where you put them.

The L5-C Plus allows for firmware updates through the USB port, making sure the light will always perform at its best.

The light is compatible with optional accessories, including the ones that were made for previous L-Series lights. Additionally, the separately available SkyPanel remote can also control the L-Series Plus through a USB connection.

• Long-term performance for 50,000+ hours
• Daisy-chain power and data
• IP20 rated
• CE, UKCA, CB, ENEC, cNRTLus, FCC, PSE certifications

Related Questions and Answers

Q: 1. What is the noise level in dB for each one?

A: Noise emission Ambient temperature = 35° C (95° F). . . . . . . . . . . . . . . 20dB(A) Ambient temperature = 45° C (113° F). . . . . . . . . . . . . . 30dB(A)

Q: 2. Would This work with a Strand Or Colortran Theater Lighting Fresnel? Or only with the Arri?

A: This lamp was purpose built for the Arri.

Q: 3. Are these tough? If I set up and break down the ARRI light with the Relamp installed everyday, will it last a long time?

A: Yes, this lamp is made tough and would last quite a long time with set-ups and breakdowns.

Q: 4. could this fit in a tweenie 2 mole richardson fixture?

A: The Visionsmith ReLamp 300 LED for ARRI 300 Plus Fresnel (Daylight) BH #VIVSFKWD is specifically for the Arri 300 Plus housing.

Q: 5. Why are these 5000K? For true daylight these should be in the 5500/5600 kelvin range. Am I missing something?

A: These are geared for the Cinema industry and 5000K is the preferred color temperature

Q: 6. Could I make this fit in an arri 150?

A: No, the following Relamp will accommodate the following fixtures. ARRI 300 Plus ARRI ARRILITE 575 Plus/Fresnel Mini Kit ARRI Compact Fresnel Three-Light Kit ARRI Four-Light Fresnel Mini Kit ARRI Fresnel 5-Light Kit ARRI Fresnel Combo 4-Light Kit ARRI H-4 Plus Hybrid AC Light Kit ARRI Softbank D1 Three-Light Kit ARRI Softbank D2 Three-Light Kit ARRI Softbank D4 Four-Light Kit ARRI Softbank I Tungsten 4-Light Kit ARRI Softbank IV Plus 5 Light Kit

Q: 7. It appears that the 150W light in this kit is supplied with a bulb having a 2900 degree color temperature, while the other two lights are supplied with 3200 degree bulbs. Are 3200 degree bulbs available that would fit in the 150 watt housing? And can anyone comment on how likely the 2900 vs 3200 difference is to be a significant issue in video'ing indoor interviews? Thanks.

A: While there are no 3200° K bulbs for the Arri 150 Fresnel, the difference in color temperature can be supplemented with the use of a CTB filter or with a custom white balance setting in the camera.

Q: 8. Would this fit as a replacement for the tightening knob on the Elinchrom ONE? The flash droops due to insufficient tightening.

A: No, this Arri Locking Yoke Tilt Handle is specific to the Arri L5-C Fresnel.

Q: 9. What's the warranty?

A: The Visionsmith ReLamp 650 LED for ARRI 650 Plus Fresnel (Tungsten) has a limited 2-year manufacturer warranty.

Q: 10. Why is this daylight bulb rated at 5000k? For this price you would think they would actually produce a 5500/5600 kelvin product.

A: Hi Sam, Visionsmith ReLamp went with the 5000k standard because their test showed that it produce more pleasing skin tones (as it is a little warmer) than 5500/5600K.