Ashly Ne4800As Dsp 4-Ch Aes3 Input 8-Ch Output

Ashly Ne4800as Dsp 4-ch Aes3 Input 8-ch Output

Product Code: eq147973
Availability: In Stock

$8,097.00 $10,688.04

Qty

18 reviews Write a review

Description
Reviews (18)

Control and protect your sound system with the Ashly ne4800AS, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne4800AS features four option bays for expanded functionality. This model includes the 4-channel AES3 input card and 8-channel AES3 output card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

4 Analog Inputs / 8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows Compatible

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Word clock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.3 lb / 4.7 kg

CobraNet, Dante, AES3, Mic input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover, and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network setup time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. Does this result in 32-bit float or integer PCM recordings? Steinberg/Yamaha interfaces result in 32I, causing compatibility problems.

A: This is a floating point device.

Q: 2. Is the headphone output of the SC6 a mono or stereo signal? Thanks!

A: The headphone output on the SC6 is stereo and uses a 3.5mm TRS connector.

Q: 3. Both mics work fine plugged in, but I can not get the headphone plugged into that jack to let me hear or monitor any sound at all. Ive tried 3 dif apps. Can anyone point out an app and settings that work for this? Android Phone

A: Using an iPhone with the TRRS plug the headphones work fine using FILMiC Pro. I found a link to their support for Android on their web site but cannot include that link here.

Q: 4. Would this work with Black Magic Pocket?

A: Sorry, I have no idea. I bought one to use with iPhone 5 (on which it works really well).

Q: 5. Any recommendations on an inexpensive mixer that I can connect my phone to? I need to use 4 mics, and I'm using lavalier mics.

A: 4 mics to your phone sounds difiicult, You might use 2 phones and plug thats what I can sugest.

Q: 6. What is the diameter of the carbon fiber legs?

A: The Sirui CT-3204 Explorer Series Carbon Fiber Tripod has leg diameters of Ø22.2, 25.8, 29.4 & 33mm.

Q: 7. Can I make a phone call or Skype/Zoom call with an external microphone (TRRS) and regular headphones on my iPhone 11 Pro with the Rode SC6 (connected to iPhone via Apple Lightning to 3.5mm dongle)? Thanks!

A: Yes, If you use this to connect headphones and a mic to your iPhone dongle it will work.

Q: 8. Does this unit fully power off when on battery when the power button is pressed or does the power LED remain lit as some others?

A: The ANDYCINE T7 7" 4K HDMI Input/Output 1920 x 1200 On-Camera Monito will fully power off when the power is turned off, the LEDs will not remain on.

Q: 9. You say it puts two microphones into one mono channel. Does that mean on playback you only hear in in one channel or does it play in both?

A: It records both mics into one mono audio channel, but on playback you can hear it in both 'ears' - both left and right channels equally. It's really being recorded as Dual Mono , if that helps.

Q: 10. Does this work with a battery powered lavelier mic like the Audio Technica ATR3350 ?

A: Sorry I don't know.

Jeff	24/09/2024
I've used these for over length cat6 cable runs in a school parking lot. The camera had 4 sensors and night IR. It also required 30W PoE at the camera. You will likely need to get a larger PoE injector for long runs that require PoE. I used a 60W PoE injector to run a 30W PoE camera out at about 600 feet. Need 60W PoE at the device, use the 90W PoE injector. Additionally, you will need one of these units for EACH side. 5

Nikhom	16/08/2024
Very good for wrapping around the projectors stand and the pole 5

Bachir	12/08/2024
Everything I need 5

Kolton	11/08/2024
Great, works as expected. 5

John	08/08/2024
Great balance of power, port versatility, FAA compliance, and price. 5

Eric	06/08/2024
I really love this battery, and have used it for both my cameras, and my light kits. The battery is long-lasting, features a couple of D-Taps, and a USB port. Even though I have them for a long time, it still holds a charge well. I am a big fan of IDX batteries. 5

Ross	11/07/2024
I shoot for all the national networks all over the world and the IDX V-mount batteries are the ONLY batteries I will use & trust period! IDX also offers the best customer support if ever needed. 5

Itzhak	11/07/2024
sales man recommended and installer was grateful to use 5

MAT	04/07/2024
Installed this shelf to support a stand alone receiver in a formal living room. The installation was less than 10 minutes and was able to use the provided hardware with ease. Folks reporting issues using provided hardware on like shelves need to pre-drill pilot holes for large lag type bolts to reduce amount of torque required to fasten. The shelf bracket is very secure and the tray is removeable without taking out the hardware. Very elegant, secure and professional looking. Fits closely to the wall and does not protrude way out as some other units do. Check the dimensions carefully when you are browsing for overall L x W x H as well as how far out from the wall the unit goes. This one is perfect for supporting up to 25lbs. and seemed like it could easily support more. 5

jack fairweather	29/06/2024
OK, let me start by telling you by what I was looking for in a camera, mini DV bag.I wanted a light durable bag, that could pack down in a rucksack or my bigger camera case ready for action. I don't always want to carry my big journalist bag, but when I go out and about I want proper protection.This bag is exceptionally durable. It packs down flat, but is rugged enough to protect your camera (it has a slightly stiffer back). The zip on the side allows you to expand the case. I have a Nikon d90 camera which fits in their comfortably with a another lens and my notebook - similarly I can carry my mini-HDVD camera with the D90.The belt strap allows you to carry it around the waist or slung holster style over your shoulder.A neat velcro lid allows you to seal and open the bag quickly.I've never written an ... review before, although I'm usually an avid reading of other people's entries. This bag has moved to write! Having trashed my last camera because I didn't have a handy enough small bag, and having searched long and hard for the right one, I thoroughly delighted to found the perfect bag.The only down side is the bags price - there are cheaper ones out there, but none that pack down so nicely while offering so much protection. And if there's one way to ease the pain of buying the bag - it's made in America! so your bucks of going to someone down the street *! 5