Ashly Ne4800Sc Dsp With Aes3 Outputs & Cobranet Card

Ashly Ne4800sc Dsp With Aes3 Outputs & Cobranet Card

Product Code: eq147977
Availability: In Stock

$9,297.00 $12,643.92

Qty

13 reviews Write a review

Description
Reviews (13)

Control and protect your sound system with the Ashly ne4800SC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne4800SC features four option bays for expanded functionality. This model includes the 8-channel AES3 output card and CobraNet network card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

4 Analog Inputs / 8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows Compatible

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Word clock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.3 lb / 4.7 kg

CobraNet, Dante, AES3, Mic input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover, and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network setup time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. Does this fit on a Red Camera V mount?

A: Yes, the GVM V-Mount Battery with D-Tap and DC Outputs BV-95 can mount to the V-Mount plates on RED DMSC cameras. Although the battery provides power, you will not get a real-time readout for battery duration on the camera. You should consider monitoring the battery voltage through the RED LCD for battery life.

Q: 2. Can i travel with it on an airplane

A: The GVM V-Mount Battery with D-Tap and DC Outputs BV-160 cannot be taken in checked baggage. However, with airline approval, passengers may carry up to two spare larger lithium ion batteries (101–160 Wh) in carry on. So, with airline approval, this can be taken in carry on.

Q: 3. Can you use this battery for Aperture LS 60X?

A: Yes, the Aputure LS 60X can take up to 21V.

Q: 4. Hello !! One question: if I made a mistake in a datapath model you can ask for the change

A: To exchange an item please contact our: B&H Customer Service Team: Call: 800.221.5743 or 212.239.7765 Email : cs@bhphotovideo.com

Q: 5. Does the "dual charger" charge faster than the individual charger plug?

A: Yes, individual charger plugs are commonly the slowest charging options available for these types of batteries.

Q: 6. Do I have to be careful not to overcharge this battery, or does it have overcharge protection?

A: If using the proper charger this battery should not overheat.

Q: 7. Will this battery properly power the Genaray Spectro LED 800B1 Bi-Color Studio LED Light? If so, for how long?

A: Yes, the GVM V-Mount 98Wh Batteries are compatible with the Genaray Spectro LED 800B1 Bi-Color Studio LED Light. They will last 1.97 hours.

Q: 8. What is the maximum continuous draw on this model?

A: The GVM V-Mount Battery with D-Tap and DC Outputs BV-160 (B&H# GVBV160) allows for up to a 12A draw. https://bit.ly/3zT5gOg

Q: 9. Will this work on BH #FOSP11020600?

A: The GVM V-Mount Battery with D-Tap and DC Outputs BV-95 will power the Fovitec 600XB Bi-Color LED Light Panel.

Q: 10. Will this work with the Godox UL150?

A: Yes according to the manufacturer's specs (needs at least 10 amps), this battery should work fine with the Godox UL150. https://www.bhphotovideo.com/lit_files/607260.pdf

anyonymous	22/09/2024
i use this mixer for several years, live sound and recording. the preamps are clear, full and detailed. by far the best preamps for the dollar i have ever heart. 5

Gastone	22/08/2024
Very fast shipment. All OK! 5

Rob	15/08/2024
Perfect for adding one AES device at 96k to your Dante Network. I bought 2 of these, one for each of my Bricasti Reverb units so I could put them on my Dante network. Worked flawlessly. 5

Rick	04/08/2024
Audinate Dante AVIO 2x2 AES3/EBU I/O Adapter for Dante Audio NetworkS works perfectly. Just add to your Dante network, POE switch or injector required, route audio in Dante Controller and you are set! Great economical solution when you need a pair of AES3 audio inputs and/or outputs. Highly recommended. 5

Tim	23/07/2024
Nothing in it's price class comes even close. This unit is rock solid, easy to use, and offers great flexibility. It can be used as a delay, crossover, eq, limiters, and many other audio needs. With 4 ins and 8 outs, the setup can be almost endless. You can use outputs 1 & 2 as Master LR, outputs 3 -6 for delay lines, and 7 & 8 as a biamped monitor send. I would definitely spec and install this unit on any of my installations. 5

TravisH	04/07/2024
I use this product in our committee rooms, legislative house, and senate chambers. It is very easy to add and network together for the perfect control. It would be nice to have a web connect feature for internet remote access control (hint, hint). 5

Ioannis	03/07/2024
Adding this card to Ashly Digimix24 will release the full power of the mixer, allowing you to use all input/output channels in your PC/DAW/iPad. It works flawlessly, and my only minor complaint might be that the latency is not as low as e.g. my RME UCX, but still in the very close to it and in the unnoticeable side of things (about 5-6mS full duplex). This also has to do with the sample rate used (48KHz), while UCX can go up to 192KHz, which reduces latency further. All things considered, I suggest Ashly USB-32 without a second thought! Service of B&H was also awesome, arriving to the other end of the world (New Zealand) in very short time and without issues! 5

Mark	01/06/2024
Since Presonus does not provide Dante capability in their StudioLive mixers, this adapter is a good way to add it for at least four output streams from one of the mixer's mix busses. Great for sending Dante streams to remote powered speakers, saving mixer analog outputs for other uses. 5