Designed for system cases and optimized for airflow and noise, the black Lian Li UNI FAN TL LCD 140mm Reverse Blades Blackfrom Lian Li UNI FAN TL LCD 140mm Reverse Blades Blackfeatures seven reverse fan blades, a fan speed of 350 to 1600 rpm with Pulse-Width Modulation, and Fluid Dynamic Bearing technology that provides stability, durability, and longevity. It generates only 29.4 dBA of noise, a maximum airflow of 64 CFM, and a maximum static pressure of 3.1mm H₂O.

Thanks to a 1.6" IPS display, users will be able to monitor temperature and loading of their CPU and GPU, plus fan speed. Or, upload a personalized MP4, GIF, JPG, or PNG to the display. The fan also has 26 LEDs with a side diffuser on each side of the frame. An infinity mirror on both sides of the frame helps showcase multi-layer lighting effects, or customize individual effects on each side of the LED strips. Included is a UNI FAN controller cable (P-7P) and four screws. Protection is provided by a limited 3-year warranty.

Please note that the controller is not included but is required for use. UNI FAN TL series fans will not function without a controller. Controllers are only included in the 3-pack.

Seven Reverse Fan Blades    1.6" 400 x 400 Customizable IPS Display    Dual Zone Lighting Effects with 26 LEDs    Enlarged Infinity Mirror    Pulse-Width Modulation    Fan Speed: 350 to 1600 rpm    Maximum Noise: 29.4 dBA    Fluid Dynamic Bearing Technology    Daisy-Chain up to 7 Fans per Controller    Anti-Vibration Rubber Pads

• 1.6" LCD screen with 400 × 400 resolution
• Supports GIF, MP4, JPG, and PNG files
• Suitable as a PC case with airflow and noise optimization
• Comes with Lian Li flow-through animations through L-Connect 3
• FDB bearing that provides stability, durability, and longevity
• Enlarged infinity mirror around the frame with a longer light guide for a unified daisy-chained look
• Features two light zones for increased lighting customizability
• UNIFAN interlocking system for ease of cable management
• LED lighting and fan speed controller shared with UNIFAN TL
• Complete software control with L-Connect 3

• PCIe power cable
• 400 × 400 resolution
• 500 nits typical brightness
• IPS display

Monitor the temperature and loading of your CPU and GPU, as well as the fan speed, instantly with built-in hardware monitor dashboards on the screen.

Note: The more sensors used, the higher the CPU load will be. It is recommended to keep sensor display at a maximum of 3.

Elevate your system's style by uploading your own personalized MP4 / GIF / JPG / PNG.

Building on the design success of the UNI FAN series interlocking system, the UNI FAN TL series takes clutter-free setups to the next level.

Durable Daisy-Chain Solution
Experience a hassle-free setup with the slide-in daisy-chaining mechanism, securely holding the fans in place and ensuring a snug fit for easy configuration.

Seamless Connection
A single cable is all you need to connect a group of up to 3 TL LCD fans to the controller, which supports a maximum of 7 TL LCD fans per controller, with a group of 3 on each port (up to 16 TL+TL LCD fans in total). To operate 8 to 12 TL LCD fans, please use 2 controllers simultaneously. Note that L-Connect 3 doesn't support more than 13 TL LCD fans.

Note: The controller cable is only applicable on the pin side of the fan. Do not install it the other way.

Well Adapted for Most Configurations
The interlocking key at the end of TL LCD fans is removable for enhanced compatibility and less interference with other components.

The UNI FAN TL LCD is engineered for stable fan blade operation, ensuring efficiency at a low noise level.

Metal Bearing Shell
To securely hold the impeller to the shaft.

Magnetic Rubber Ring
To provide extra support for fan operation.

Stator
To provide a rotating magnetic field that generates momentum.

Brazz Nut
To prevent oil leaks.

Fluid Dynamic Bearing (FDB)
To effectively reduce the internal friction for improved durability.

Shaft and Copper Base
To ensure fan blade stability during operation.

Thicker Fan Frame
28mm thick fan frame helps deliver more airflow and static pressure.

Rubber Pads
To reduce vibrations and maintain extremely low noise levels.

This fan provides an improved cooling experience with a fan that doesn't compromise on thermal control, all while offering a personalized screen for a touch of individuality. It features an airflow of 64 CFM, a static pressure of 3.1mm H₂O, and noise levels of 29.4 dBA.

You're able to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with L-Connect 3. This fan has a speed of 350 to 1600 rpm.

Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.

Illuminate your setup with the UNI FAN TL's enlarged infinity mirror (30% larger than UNI FAN SL-INF on the side) on both sides of the frame, showcasing clear and 0.7mm gap multi-layer lighting effects.

Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of them.

Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.

L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting effects, fan speed, and LCD screen.

UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a maximum of 7 TL LCD fans.

Each port supports a maximum of 10 TL fans or 3 TL LCD fans, but the 1st port doesn't support TL LCD. The PCIe power cable powers up the connected fans, a USB cable plugs directly into the motherboard's 9-pin USB header, and the 5V ARGB/4-pin PWN cable is required for motherboard sync functionality.

Note: Do not use a splitter; plug directly in for a stable signal.

Related Questions and Answers

Q: 1. Can you use this as a shoulder strap?

A: I can use it as a shoulder strap butI was surprised that there isn't much length to play with. I am 5'6 and weigh 145lbs. So I'm fairly small framed. I can put it over my head so it goes across my body and swivel it from front to back with it adjusted to full length.

Q: 2. What is this used for

A: A punch down tool is a small hand tool most often used by telecom and data network technicians to install wiring for telephone, computer and various audio networks. This tool allows for the quick and effective cross-connection of wires through the use of 66-type or 110-type connection blocks. The Greenlee PDT SurePunch 110/66 Combination Blades is a punch down tool that can terminate cable in a single punch, and it is designed to cut cable, separate bonded twisted-pair cables and strip insulation and cut wire. You may also use it as a screwdriver or

Q: 3. Can this hold an Aputure 120d with Light dome ii?

A: It is rated for 11 lbs. Just be careful of wind.

Q: 4. How low does it go?

A: I have this stand and the base lays completely flat allowing your light to go all the way to the floor.

Q: 5. What is the length of the neoprene part of this strap?

A: The strap is adjustable from 36.0 to 43.0" / 91.4 to 109.2 cm

Q: 6. Will this work with a CANON 5D Mark IV?

A: Hi David! Yes, this strap will be great for your Canon 5D Mark 1V. It will leave only the short Uni Loops on your camera when you remove the main strap to do tripod work. It has the internal control stretch system to help support the weight of your camera and lens combination so that it will be comfortable for long photo shoots. Enjoy!

Q: 7. Will this strap attach to a Sony FE 200-600 zoom lens?

A: Yes, but we usually suggest the following models as they support more of a payload OP/TECH USA Envy Strap (Black) BH #OPESB • MFR #3801332 https://bhpho.to/3Wt4DDj

Q: 8. What is the smallest foot print? Wondering if this could double as a 360 camera stand.

A: These are good since the legs are very thin, but you will not want to pull them in very much or they will get very instable.

Q: 9. When using with an einstein and 50 westcott do I need anything else to attach it?

A: No

Q: 10. Can I use this with an Alien B 400 and west tot 50x50?

A: The stand would hold it just fine. They are defiantly travel stands that have a little wobble to them fully extended. I wouldn't want to use them on a regular bases for local shoots. I personally use them for Litepanels LED lights as a travel kit and it works well in that case. For everyday use I would get a step up from these stands