Ashly Ne8800Sc Dsp With Aes3 Outputs & Cobranet

Ashly Ne8800sc Dsp With Aes3 Outputs & Cobranet

Product Code: eq148212
Availability: In Stock

$10,497.00 $15,010.71

Qty

6 reviews Write a review

Description
Reviews (6)

Control and protect your sound system with the Ashly ne8800SC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne8800SC features four option bays for expanded functionality. This model includes the 8-channel AES3 output card and CobraNet network card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

8 Analog Inputs/8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Wordclock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.5 lb / 4.8 kg

CobraNet, Dante, AES3, Mic Input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. Can this battery output 10 Amps continuously as required by a 150 Watt LED?

A: Yes it will power it continuously for approximately 40 minutes

Q: 2. Has this been tested with the aperture 120d?

A: While it can work with the higher amperage of the Aputure 120D, it will not run the light for a longer period of time at full power. Your results may vary.

Q: 3. Will this work with red Komodo?

A: The GVM V-Mount Battery with D-Tap and DC Outputs BV-160 will work on the Komodo as long as there is a V-Mount adapter installed for it to be used on.

Q: 4. Hello !! One question: if I made a mistake in a datapath model you can ask for the change

A: To exchange an item please contact our: B&H Customer Service Team: Call: 800.221.5743 or 212.239.7765 Email : cs@bhphotovideo.com

Q: 5. Does this support a framerate of 23.976 genlock for 4k?

A: Yes, the DATAPATH Fx4 Display Controller with Four HDMI Outputs (B&H# DAFX4H) can accept Genlock Input from any video input on HDMI 1, HDMI 2, or using the DisplayPort. Please note that there is a maximum of 165MPixels/s. It can also do so on an analog black-burst basis using the BNC connector.

Q: 6. Is this compatible with the core nano micro quad charger?

A: Yes, the SWIT 140Wh Pocket Battery with D-Tap and USB Outputs (V-Mount) can be charged on the Core nano micro quad charger.

Q: 7. Can this battery be used with de new Ursa Broadcast G2? Thanks

A: Yes, GVM V-Mount Battery with D-Tap and DC Outputs would work with the Black Magic URSA models. Please make sure you add the V-Mount adapter to the camera. Black Magic V-Mount adapter - https://bhpho.to/3opyw9c

Q: 8. Can this be used to power Aputure lights like 300d mk ii, LS 300x, and Nova P300?

A: The GVM V-Mount Battery with D-Tap and DC Outputs BV-95 (B&H# GVBV95) would not provide enough wattage for powering the Aputure lights such as the 300d MKII, LS 300X, and Nova P300 at full power but could be used at lower power settings.

Q: 9. The item description says, "D-Tap and DC outputs, both of which can be used as a charging or discharging port." This is inconsistent with the product labeling that clearly says only "DC OUTPUT" at the USB port. Which is it?

A: The USB port can charge a device connected to it with a USB cable. The D-Tap connection is for powering a light or video accessory with a D-tap connector or for charging the battery via D-Tap.

Q: 10. Can we play UHD 4k with one HDMI 1.4 cable?

A: Yes you can.

Ioannis	17/08/2024
Adding this card to Ashly Digimix24 will release the full power of the mixer, allowing you to use all input/output channels in your PC/DAW/iPad. It works flawlessly, and my only minor complaint might be that the latency is not as low as e.g. my RME UCX, but still in the very close to it and in the unnoticeable side of things (about 5-6mS full duplex). This also has to do with the sample rate used (48KHz), while UCX can go up to 192KHz, which reduces latency further. All things considered, I suggest Ashly USB-32 without a second thought! Service of B&H was also awesome, arriving to the other end of the world (New Zealand) in very short time and without issues! 5

TravisH	21/07/2024
I use this product in our committee rooms, legislative house, and senate chambers. It is very easy to add and network together for the perfect control. It would be nice to have a web connect feature for internet remote access control (hint, hint). 5

Tim	12/07/2024
Nothing in it's price class comes even close. This unit is rock solid, easy to use, and offers great flexibility. It can be used as a delay, crossover, eq, limiters, and many other audio needs. With 4 ins and 8 outs, the setup can be almost endless. You can use outputs 1 & 2 as Master LR, outputs 3 -6 for delay lines, and 7 & 8 as a biamped monitor send. I would definitely spec and install this unit on any of my installations. 5

Rob	05/07/2024
Perfect for adding one AES device at 96k to your Dante Network. I bought 2 of these, one for each of my Bricasti Reverb units so I could put them on my Dante network. Worked flawlessly. 5

anyonymous	27/06/2024
i use this mixer for several years, live sound and recording. the preamps are clear, full and detailed. by far the best preamps for the dollar i have ever heart. 5