Connect 4K devices with standard HDMI connectors using the gray 5' Cisco HDMI 2.0 Cable. Certified for HDMI 2.0, this cable is designed to be compatible with Cisco Webex Room Kit products.

HDMI 2.0 Certified    Compatible with Cisco Webex Room Kits

Related Questions and Answers

Q: 1. will this splitter work to connect a wacom one pad and a monitor?

A: No it will not.

Q: 2. I want to connect samsung flip (UHD signal) to atem mini pro (only accept 1920x1080 and yuv signal), will this hdmi splitter work?

A: NO, this slitter will work with the UHD signal but it can not down-convert the resolution so the signal will remain UHD and will not be accepted by the ATEM mini Pro

Q: 3. Will this work with Mac OS? And if so is there a version requirement?

A: Yes, the ANDYCINE HDMI to USB 2.0 Video Capture (B&H# ANU2H41) will work with computers running MacOS. The port on the computer must be USB 2.0 (or higher) and also conform to the USB A shape for the port. If your Mac uses USB C (e.g. Thunderbolt 3 or 4) then you can add this adapter to use the ANDYCINE HDMI to USB 2.0 Video Capture (B&H# ANU2H41) with it: Pearstone USB 3.0 Type-C to USB Type-A Adapter (6") (B&H# PEUSB33CA06) https://bhpho.to/3vou52K

Q: 4. Will this HDMI splitter work with the Blackmagic Ultra Studio Mini Recorder?

A: The UltraStudio Mini Recorder can accept signals up to 1080p in 30 fps. However, as this splitter will only output in a 60 fps signal, you may be limited to 720p quality for the Mini Recorder input.

Q: 5. What is the diameter at the top of the Center column. Would it be compatible with a Leofoto LH40 or Sirui KS-40 ?

A: The base mount diameter on the 3 Legged Thing Winston 2.0 Tripod (Bronze) is 40mm. Yes, the 3 Legged Thing Winston 2.0 Tripod (Bronze) is compatible with the Leofoto LH-40 Low Profile Ball Head with Quick Release Plate (Black) and the Sirui KS-40 Low Gravity QR Ball Head with Panning Arca-Type Plate.

Q: 6. What thread size is used for the feet?

A: The thread size of the feet on the Winston 2.0 Tripod is 3/8-16".

Q: 7. Will this work with a Roku Ultra player?

A: Yes, The DVDO HDMI 2.0 Audio Extractor should work with the Roku Ultra and allow you to extract the audio so you can use it with TOSLINK SPDIF Digital or Analog speakers.

Q: 8. Will this splitter work with Atem mini extreme hdmi out put 1 to split to 4 television displays

A: Yes, while we have not tested the Kopul HDMI 2.0 1 x 2 Splitter with the Atem Mini, it should work if you wanted to split the HDMI output. Please make sure to choose the 4 output mode listed below: Kopul HDMI 2.0 1 x 4 Splitter BH #KOHDMISP1420 https://bhpho.to/3ZkX172

Q: 9. Does the HDMI output still retain the full HDMI Audio output?

A: Yes it does. The Audio is still present on the HDMI output when using the DVDO HDMI 2.0 Audio Extractor.

Q: 10. It looks like this is powered by 5vdc. Can I power it with USB rather than the power adapter?

A: The DVDO HDMI 2.0 Audio Extractor does not have a USB port with which to intake power, so powering the audio extractor via USB is not possible. We recommend using the included power supply to power the DVDO HDMI 2.0 Audio Extractor.