You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Quasar Science Ossium Ladder Kit With Lift Bar

Quasar Science Ossium Ladder Kit With Lift Bar
  • Product Code: eq148344
  • Availability: In Stock

$9,750.00 $12,285.00

The Ossium Ladder Kit with Lift Bar from Quasar Science is a slim and versatile light-hanging system for mounting LED tube lights, such as the Quasar Science Rainbow. Made to be hung from overhead, the system is composed of pipes, wires, and brackets that allow you to hang up to 16 tube lights to make one large array. This kit also includes components for the lift bar, which allow it to be extended to fit 2, 4, or 8' lights. Optional clips are available separately, making the system further compatible with any T12 profile light.

Mount up to 16 LED Tubes    Designed for Overhead Hanging    Configurable to 2, 4, or 8' Lights    NATO Mount Brackets

General
CompatibilityQuasar Science Rainbow
Environmental
Environmental ResistanceNo
Physical
MountingTop: 2x Eyelet
Load Capacity330 lb / 149.7 kg
ColorBlack
Dimensions104.8 x 12.3 x 3.7" / 266.2 x 31.2 x 9.4 cm (2' Configuration)
104.8 x 35.3 x 3.7" / 266.2 x 89.7 x 9.4 cm (4' Configuration)
104.8 x 79.5 x 3.7" / 266.2 x 201.9 x 9.4 cm (8' Configuration)
Weight15.5 lb / 7 kg (2' Configuration)
16.5 lb / 7.5 kg (4' Configuration)
17 lb / 7.7 kg (8' Configuration)

The lift bar is designed to hang from above in a studio via eyelets on either side, with two of the included wires affixed to either end. At even levels, two of the included brackets are then fastened to the wires, allowing the light to be mounted via NATO rails. Once secured, the lights can be adjusted to your desired height, number, and spacing to best suit your needs.

Related Questions and Answers

Q: 1. Are these compatible with T8 Dimmable lights from Quasar, or just the T12 Crossfades?

A: According to the manufacturer, the Quasar Science Cluster Power Adapter for 4 Linear LED Lamps with 3-Pin Grounded Plug is not compatible for use with the Quasar Science T8 Dimmable LED Lamps. The Quasar Science Cluster Power Adapter is only for use with their Crossfade lamps.

Q: 2. How do you access the ladder when it is folded and closed in the ceiling?

A: According to the Telesteps Loft Ladder's instruction manual on pages 3-4, once the ladder is properly installed and the ladder frame assembly has been secured to the ceiling joist and door, you simply pull down on the door slowly with the pull down cord to bring the ladder down to use. The attic/loft ladder will be ready for use one the door has been fully opened. You would open the attic/loft ladder by gripping the tubes with both hands and lifting it off the retainer hook and allowing it to open and descend to the floor. There are windows on each side of the rungs/step of the ladder. Once the locking indicator windows turn from red to green when the ladder descends, that will indicate that the sections of the ladder are locked and the ladder is safe to use.

Q: 3. Can you attach a voltage dimmer to this power adapter?

A: The Crossfade LED these are designed to be used with can be used with most dimmer packs.

Q: 4. When folded up how muck stocks up in the attic,

A: Folded the soft ladder appears as it does in the picture. Length wise the folded ladder is about 1 meter.

Q: 5. Can this be used as an extension to an existing fire escape?

A: We would not recommend that. For information regarding how to safely extend your fire escape ladder please contact your landlord or local fire station.

Q: 6. Do you have a replacement part that is compatible with a 1205 model?

A: I tried them for the 1600 model (round tubes) and they didn't fit. The 1800 has oval tubes.

Q: 7. Will these work on 1600 ET?

A: These replacement feet are compatible with the 1600ET.

Q: 8. Is this compatible with Quasar Science Crossfades?

A: no, these are T-12 size

Q: 9. Will the Telesteps 1400E Ladder Replacement Feet (BH #TEF1400E) fit on the Telestep model1205?

A: No, it is only for the 1400E, 1600E, and 1800EP. You can find replacement feet for your model by clicking the link below; https://www.telesteps.biz/index.php?main_page=product_info&products_id=12

Q: 10. Can you use this ladder as a ramp to pull containers into the attic and lower them down?

A: The Telesteps Loft Ladder is not designed to be used as a ramp. It should only be used as a ladder.

22/07/2024

[Black] I needed a small cordless (battery powered tube kit for special situations. Great and Pow! B & H delivers much more than just the product

5
08/07/2024

[Black] If you need to place your Quasar on a stand or hand it some where this will give you the M 10 to allow you to mount it.

5
22/06/2024

[Black] What can I say, if it's the Quasars perfectly. Highly recommend!

5
18/05/2024

[Black] These are simple to install and work perfectly for mounting t12 lights.

5
18/05/2024

[Black] Wanted to leave a review to counter the negative one because clearly there is a misunderstanding.

This is an excellent tool to check a dmx ports universe without bothering the programmer. That said, it requires the programmer to use a method at the console level to identify universes. Any programmer working in Film should know and should be using this method. It is too easy to setup, and too helpful to SLTs not too.

This tester and another competitor version we're both a response to finding a smaller battery operated tester that could take advantage of this method. For that it does the job well.

If anyone is unaware of this method of universe identifiers...
The idea is to PARK the 512th DMX slot at the level corresponding with its universe. So the dmx testers only job is to read the level of the 512th channel. (Though is has ability to read any ch if you prefer)

So....
Universe 1: 512 is @ 001
Universe 2: 512 is @ 002

The only caveat for programmers is to choose whether to input that level in 0-100 or 0-255 format and match that setting to your tester.

0-255 is best, more accurate more possible universes.

5
22/04/2024

[Black] Working great so far!

5
17/04/2024

[Black] These are perfect for my quasar lights
i use these on my crossfades and my rainbows.
you can screw these into anything and make your own mounts.
i have them double stacked with a baby plate.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Quasar Science Ossium Ladder Cable 8' 4-pack

$900.00 $1,395.00

Quasar Science 4-bank Shell Ossium Plate 4'

$1,950.00 $2,847.00

Quasar Science 2-bank Shell Ossium Plate 2'

$1,650.00 $2,557.50

Quasar Science 2-bank Shell Ossium Plate (2')

$2,250.00 $2,992.50

Quasar Science Ossium Frame Rainbow 2 (4')

$35,100.00 $51,948.00

Quasar Science Ossium Baby Pin Bag

$90.00 $110.70

Quasar Science Ossium Frame Twelve Rainbow 2

$26,700.00 $39,249.00

Shure Se215-cl Clear Right Side Earphone

$150.00 $204.00

Products You May Like

Dvdo Air 4k 2160p/30 Hdmi Wireless Extender Kit

$1,197.00 $1,460.34

Kase 95mm Magnetic Hood With Adapter

$209.85 $274.90

Godox Dual Power Flash Bracket Ad200

$147.00 $232.26

Hp 1-year On-site Support Plan For Laptops

$134.85 $188.79

Hp Premium Bond Paper 24" X 300' Roll

$328.17 $452.87