Teradek Ranger Micro 2500 3G-Sdi/Hdmi Wireless Kit V-Mount

Teradek Ranger Micro 2500 3g-sdi/hdmi Wireless Kit V-mount

Product Code: eq148466
Availability: In Stock

$29,970.00 $43,156.80

Qty

19 reviews Write a review

Description
Reviews (19)

Transmit lossless HD video up to 2500' with the Teradek Ranger Micro 2500 3G-SDI/HDMI Wireless Kit V-Mountfrom Teradek. Redesigned for broadcast, event, drone, and handheld applications, this transmitter can input up to 1080p60 video over HDMI or 3G-SDI with 10-bit HDR support and transmit up to 1080p60 video over a wide 4.9 to 6.4 GHz wireless range, including licensed and unlicensed bands in the 6 GHz U-NII 5 spectrum. The transmitter unit provides a powerful signal that can travel up to 2500' line of sight. It also features an SDI loop output for local monitoring, and one horizontal and one vertical N-type antenna.

The transmitter supports transmission of up to 1080p60 video to up to six receivers and features built-in AES-256 encryption protects your video from prying eyes. It can transmit visually lossless video to any Ranger series receiver with zero delay. The transmitter supports a desktop Launchpad software application or the Launchpad app for iOS or Android that easily connects via Bluetooth 5, which both provide a spectrum analyzer, channel selection tools, and remote configuration.

The unit is powered using a 2-pin DC input, and there are 1/4"-20 and M3 mounting threads to mount your transmitter on a variety of cameras, cages, or rigs.

Transmitter/V-Mount Receiver Set Supports 4.9 to 6.4 GHz Frequency Bands Transmit Video up to 2500' Line of Sight 3G-SDI and HDMI Input/Output Lossless Transmission with Zero Delay 1080p60 10-Bit 4:2:2 HDR Support Supports Transmission to up to 6 x RXs Pairs with all Ranger Series Devices AES-256 Encryption Launchpad App, Spectrum Analyzer

Key Specs
Video I/O	1x HDMI 2.0 Input 1x BNC (3G-SDI) Input 1x BNC (3G-SDI) Loop Output
Embedded Audio	HDMI: 2-Channel SDI: 2-Channel
Latency	< 0.01 ms
Video Format	HDMI (8/10-Bit 4:4:4/4:2:2 RGB, YCC) 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 480p: 60/59.94 576i: 60 480i: 59.94 SDI (10-Bit 4:2:2 YCC) 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 576i: 50 480p: 60/59.94 480i: 59.94
Power Consumption	9 W
Mounting	1x 1/4"-20 Female
Inputs / Outputs
Antenna I/O	2x RP-SMA Female
Video I/O	1x HDMI 2.0 Input 1x BNC (3G-SDI) Input 1x BNC (3G-SDI) Loop Output
Embedded Audio	HDMI: 2-Channel SDI: 2-Channel
Audio I/O	No
Power I/O	1x LEMO 2-Pin (28 VDC) Input
Other I/O	1x USB-C (Firmware) Input
Encryption	Yes, 256-Bit AES
Wireless
Wireless Range	2500' / 762 m (Line-of-Sight)
Channel Bandwidth	40 MHz, 20 MHz
Frequency Range	US: 5.92 to 6.42 GHz US: 4.85 to 5.15 GHz US: 5.35 to 5.47 GHz US: 5.85 to 5.92 GHz Non-DFS Frequencies US: 5.15 to 5.25 GHz US: 5.72 to 5.85 GHz DFS Frequencies US: 5.25 to 5.35 GHz US: 5.47 to 5.72 GHz
Latency	< 0.01 ms
RF Power	23 dBm
Wi-Fi	No
Bluetooth	5.0 LE
Mobile App Compatible	Yes: Android & iOS Functionality: Adjust Settings, Remote Control, Setup, View Live Feed
Cellular Support	No
Format Support
Video Format	HDMI (8/10-Bit 4:4:4/4:2:2 RGB, YCC) 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 480p: 60/59.94 576i: 60 480i: 59.94 SDI (10-Bit 4:2:2 YCC) 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 576i: 50 480p: 60/59.94 480i: 59.94
Video Standard Compliance	SMPTE 424M
Audio Format	2-Channel 24-Bit 48 kHz
Wireless Video Compression	Uncompressed
Timecode Support	Yes
Power
Input Power	7 to 28 VDC
Power Consumption	9 W
Mounting
Mounting	1x 1/4"-20 Female
General
Operating Conditions	32 to 72°F / 0 to 40°C
Material of Construction	Aluminum, Polycarbonate
Dimensions	4.1 x 2.4 x 1.3" / 103 x 60 x 33 mm
Weight	7.27 oz / 206.00 g

State-of-the-art hardware. Designed for professional video production. The Ranger Series is powered by Teradek's Emmy and Academy Award-winning technology for zero-delay wireless

video transmission. This model boasts a maximum range of 2500', and it works seamlessly within a variety of professional broadcast, sports, and ENG applications, including handheld gimbals, drones, and shoulder-mounted production cameras.

Pair any combination of Ranger TX and RX together, regardless of model. That means your production can quickly scale and operate a variety of Ranger systems best suited to your environment, despite differences in transmission range. Mixed Ranger systems operate with a range of the lowest paired model. 6 GHz operation requires support on both the TX and RX.

When a delay in audio and video transmission is noticeable, it's nearly impossible to offer a lifelike experience. Ranger's patented zero-delay technology solves this problem. With Ranger, your audio and video signals are transmitted with ultra-low latency, even in 1080p60, providing a visually lossless and engaging experience for your viewers.

Install the Launchpad app on your macOS or Windows computer, or on iOS/Android phone

Bluetooth 5 LE connection support

Pair transmitters and receivers with the touch of a button

Measure and analyze the frequency and amplitude of a signal

View live channel strength for licensed/unlicensed bands

Monitor your live RF spectrum bandwidth

With the number of wireless devices on the rise, and a limited amount of frequency bands to choose from, there is little room for your signal to move without interference or disruption. But with Ranger, you have options: 5 GHz for general use, licensed band frequencies for special events, and the new 6 GHz U-NII-5 band for 12 new channels of uncongested wireless spectrum.

Related Questions and Answers

Q: 1. Can you advise on the Country of Origin for this product?

A: The Blackmagic Design Micro Converter BiDirectional SDI/HDMI 3G (with Power Supply) is manufactured in Singapore.

Q: 2. Does this work with Canon C70

A: Yes.

Q: 3. Would this allow you to get video display from Komodo's SDI to a HDMI Monitor?

A: Yes, The Blackmagic Design Micro Converter SDI to HDMI 12G will convert SDI to HDMI in up to 4k resolutions. It would allow you to convert the Komodo's SDI output to HDMI.

Q: 4. Will the TX work with a Bolt Receiver?

A: No. The following units run off of two different protocol systems.

Q: 5. Can this be used as a graphics overlay insertion tool for key and fill?

A: The Blackmagic Design Micro Converter HDMI to SDI 3G cannot be used as a graphics overlay insertion tool for key and fill.

Q: 6. can this convert an hdmi 4k60fps to sdi and an sdi 4k60fps to hdmi at the same time? On the description for bidirectional says "it supports resolutions up to DCI 2K in SDI and 1080p60 in HDMI." Why?

A: Yes it can. The Micro Converter BiDirectional SDI/HDMI 12G can support 4K60p in both direction simultaneously.

Q: 7. I have a DeckLink Mini Monitor 4K in my computer, and I use the HDMI output to monitor on a BenQ PV270 monitor and would like to use the micro converter 3G to convert the SDI output from the Decklink card into the HDMI input on a UHD TV. Would this converter work for that?

A: The Blackmagic Design Micro Converter SDI to HDMI 3G will only support 2K resolutions or lower, so if you are looking to output in a UHD format you would need a higher resolution converter, such as the Blackmagic Design Micro Converter SDI to HDMI 12G with Power Supply (B&H # BLMCSH12GPSU).

Q: 8. Does this work with cat 5 transmitter?

A: Yes, the Blackmagic Design Micro Converter SDI to HDMI 3G (with Power Supply) could send an HDMI signal to an HDMI to Ethernet transmitter as long as the supported SDI and HDMI rates and resolutions match your selected Ethernet transmitter.

Q: 9. I want to connect my hdmi monitor to an ursa that only has sdi connections, is there a holder that can be bought to mount?

A: There is no mount for the Blackmagic Design Micro Converters, but most often people are using Velcro or a clamp. Also, make sure you get the SDI to HDMI 12G converter. This one is going in the opposite direction for what you need.

Q: 10. Would this device work to connect a Pocket 6k via HDMI to a Live U mobile unit that only has SDI (for live broadcast)?

A: Yes the Black Magic converter would work. It would be HD only. The Pocket cameras only output in HD. Also please note the Blackmagic Design Micro Converter HDMI to SDI 12G requires a power supply to work.

Adam	27/09/2024
[9 W] I am usually not a big fan of coiled cables, but this cable is really nice and will hold up to years of use! 5

Jim	17/09/2024
[9 W] The Elvid 3G-SDI to HDMI Micro Video Converter is one of those pieces of gear you don’t realize you need until you do. It’s such a convenient tool for anyone working with SDI equipment but needing to connect to HDMI gear like monitors or computers. I’ve used it to convert SDI signals from a camera to my HDMI monitor, and it’s super easy...just plug in, and you're good to go. It has worked flawlessly for me. What I appreciate most is how versatile it is. It supports up to 1080p60, so I’m getting crisp, broadcast-quality video every time. Plus, the SDI loop output is a fantastic bonus, letting me retain the option to still send out the signal SDI and not only HDMI. Whether you’re working with a 2nd monitor that is SDI or another SDI device, it keeps everything running smoothly. The power options are also a nice plus. If I’m somewhere with an AC outlet, it comes with an adapter. Or I can run it off my computer’s USB port, or any other device with a 5V USB output It’s nice to have that flexibility, especially on location. And speaking of locations, the compact and durable metal design makes it super portable. I can toss it in my gear bag without worrying about it getting banged up. And I love that it has a little blue light to let you know it is receiving power and is on. That is good information to have, especially when on location. For anyone dealing with both SDI and HDMI setups and gear, this little converter is a must-have. It’s reliable, compact, and makes switching between SDI and HDMI workflows a breeze. It’s been a handy addition to my kit for my productions. [I have received this product in exchange for my honest review] 5

Carlos	14/09/2024
[23 dBm] Does what it says. Not much to it. 5

Jeffrey	07/09/2024
[9 W] The perfect length for camera output to Steadicam sled input, where the right-angle connectors are very helpful. 5

Tom	02/09/2024
[9 W] Wanted a short SDI cable and this fits the bill! 5

tienne	25/08/2024
[SMPTE 424M] Yeah well, this cable is heavy duty, you can feel it. The length is perfect for my RED Komodo + Small HD monitor. 5

Terry	13/08/2024
[23 dBm] I am using it to connect a wireless transmitter to a Sony PMW and it works great. Fits closer to the camera to prevent the cord from snagging or bumping into objects. 5

Jim	02/08/2024
[7 to 28 VDC] This Elvid Video Converter is one of those tools that makes your production life so much easier. If you work with SDI equipment but need to integrate HDMI signals, this little guy is a lifesaver. I love how simple it is, just plug in your HDMI source, and boom, it converts the signal to two SDI outputs. Whether you're sending video to a monitor, switcher, or both, it gets the job done without any fuss. For live events, studio work, or any situation where you need to convert from HDMI to SDI, it’s been super reliable. And the best part is, it supports up to 1080p60, so you're getting really crisp, broadcast-quality video. I’ve used it with my camera and even hooked it up to my computer when I needed to send video to an SDI workflow. It handles both like a pro. One thing I really appreciate is how compact and sturdy it is. The metal body gives it that extra durability, so I don’t have to worry about it getting damaged when I’m transporting gear. And there is flexibility for power options. It comes with an AC adapter if you have access to a wall outlet. but can be also be powered from a computer or device with a 5V USB output. It’s great to have that choice depending on your setup. Honestly, for anyone looking to bridge the gap between HDMI and SDI, this converter is a solid, hassle-free solution. It’s small, reliable, and just works. It's exactly what you need when you’re on the go or in the studio. [I have received this product in exchange for my honest review] 5

Andrew	26/07/2024
[< 0.01 ms] Exactly as advertised. Great quality and dual 90 degree connections. Perfect length from camera to transmitter/monitor. 5