The white NuQ152-WH 2-Way 15" Full-Range Loudspeaker for Portable PA Applications from Turbosound features a 12" low-frequency driver with a low-mass voice coil for improved transient response, and an aluminum dome with 1" neodymium high-frequency compression driver mounted on a rotatable 100 x 60° (horizontal x vertical) dispersion-converging elliptical waveguide. All drivers are matched with an internal-passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear-panel switch. The rear-panel connector plate carries Neutrik speakON NL4 connectors for input and link connections to additional enclosures (sold separately).

Finished in a highly durable semi-matte white paint, the cabinet is constructed from 15mm birch plywood and is constructed with a rugged powder-coated perforated-steel mesh grille backed with reticulated foam. Multiple threaded rigging points are provided for suspension in any orientation, or for mounting with standard wall brackets. The NuQ152-WH Loudspeaker also features a 35mm socket for standard pole mounting, as well as integrated handles for convenient transport.

2-way full-range loudspeaker for portable PA applications

500W continuous, 2000W peak power

Suitable for FOH, side-fill, and monitor applications

Carbon-fiber loaded 15" low-frequency driver with inside/outside coil

Aluminum dome with 1" neodymium motor compression driver

Low-distortion waveguide provides 70 x 70° (H x V) dispersion

5/8" (15 mm) birch-plywood enclosure with hard-wearing semi-matte black paint finish

Rugged powder-coated perforated-steel mesh grille

Integral 35mm pole mount and handles

Multiple internal rigging points allow bracket mount and suspension in any orientation

Neutrik speakON NL4 connectors for reliable long-life operation

Related Questions and Answers

Q: 1. Where can I find a replacement driver for this speaker?

A: We do not sale replacement parts for this speaker, your best option is to contact Electro-Voice directly they will be able to further assist you. Electro-Voice Tel: 800-392-3497 or 866-782-8346

Q: 2. Is this just a subwoofer or can it be used as a speaker?

A: The Yamaha CBR15 is not a subwoofer. It is a 2-way passive speaker with a 15" woofer that provides the lowest frequency extension in Yamaha's Bass Reflex series of speakers. The Bass Reflex series also includes the CBR12 which has a 12" woofer and the CBR10 which has a 10" woofer. The CBR15 is suitable for use in a wide variety of applications for live sound and DJ systems, and it can also be used as a floor monitor.

Q: 3. Does the DZR series have an auto on/off or sleep mode? I'm concerned about being mounted high on a wall and being powered on 24/7.

A: I am not seeing that Yamaha has installed an auto on/off or sleep setting in the DZR315 manual, this is stated nowhere in their manual for this model.

Q: 4. This speaker has Bluetooth system

A: No, the Electro-Voice ETX-15P does not have Bluetooth built-in but you can use a separate Bluetooth receiver adapter to stream audio from another device like a smartphone, tablet or computer. The Alto Professional Bluetooth Total XLR-Equipped Rechargeable Bluetooth Receiver (B&H # ALBLUETTHTTL) or Galaxy Audio JIB/BT4R XLR Bluetooth Receiver (B&H # GAJIBBT4R) are both compatible options for Bluetooth receivers.

Q: 5. Do you sell the back plastic panel or know who would for this speaker? Also the full speaker replacement 15” 1000w

A: You can contact D.A.S. Audio for replacement parts. You can reach them by phone at 305-436-0521 or 888-327-4872. The US office is based in Miami, Florida and business hours are Monday to Friday 9 AM to 6 PM.

Q: 6. How many M10 mounting is available on this speaker?

A: Mounting and Rigging:The cabinet is fitted with M10 x 8 internally-threaded rigging points that allow it to be rigged with optional shoulder eyebolts and mountedin many different configurations in permanent installations. The simplest method of rigging is to use the two M10 rigging points on the top.Cabinets may also be hung upside down if required.The cabinet has an integral 35 mm pole mount socket in the bottom panel, that allows it to be pole mounted.The optional NuQ122-FY fly yoke adds further installation flexibility for scaffold, surface, and pole mounting.

Q: 7. Is anyone using this with a full rock band (guitar, bass, drums, keys, multiple vocals) as your FOH PA system? If so, thoughts?

A: This unit could be used as a FOH speaker for a rock band. A mixer would be needed to accommodate the multiple inputs required for a full band, and that would feed into the speaker. The speaker could handled small to medium sized venues.

Q: 8. What are flying mounting options? Are there any ceiling mounting kits available? Can this sub woofer be mounted together with the accompanying 12 or 15 PA speaker with specific. Hardware?

A: These are all of the mounting options for the Turbosound NuQ series that we carry:a href= https://www.bhphotovideo.com/c/search?ntt=115&refineSearchString=&ci=12214&fct=fct_brand_name%7Cturbosound&N=3992462167&ntt=nu& target= _blank https://www.bhphotovideo.com/c/search?ntt=115&refineSearchString=&ci=12214&fct=fct_brand_name%7Cturbosound&N=3992462167&ntt=nu&/a

Q: 9. how many screws retain the rear portion to the speaker horn, and what is the center to center measurement on any of the two of the screws?

A: Atlas offers a full spec sheet for this unit including dimensions and mounting flange bolt pattern and specs. Please see the following link: http://bit.ly/1LrpIGe

Q: 10. Is this a powered speaker, or does it require an amp? Also, what kind of connectors are on the back? 1/4", XLR, etc.

A: This is a passive speaker that requires an amp. The connectors on the back are screw-in Euroblock connections.