The MagicQ Compact Connect USB Lighting/Media Control Surface from ChamSys serves as a lightweight USB control surface, linking seamlessly with your computer to oversee lighting, media, and LEDs. Its compact design makes it travel-friendly, yet it boasts substantial capabilities, including two direct DMX512 outputs and the ability to transmit up to 64 universes of ArtNet and sACN through its onboard network port, without the need for extra licenses or dongles.

With illuminated access to fixture parameters via eight rotary encoders and live show control through 10 playback faders featuring Flash, Go, and Select buttons, along with a dedicated Grand Master and Crossfader for overall level control, the MagicQ Compact Connect ensures efficient operation. Additional features like an internal USB hub, audio input, 10Scene/remote input port, and working light socket enhance connectivity and convenience. Ideal for touring lighting designers or installation in theatres, schools, clubs, studios, and venues, this cost-effective solution delivers tactile playback control combined with the prowess of MagicQ software, compatible with Windows, Linux, or macOS platforms.

Lightweight USB Control Surface    10 Playback Faders    64 Universes via Artnet/sACN    2 x Direct DMX Outputs Supporting RDM    Neutrik powerCON TRUE1 Cable Included    Windows, macOS & Linux Support    Compliant with Hand Luggage Restrictions

Related Questions and Answers

Q: 1. Can this be used with Nikon flashs?

A: No, it only works with, AirTTL: A1 AirTTL, B10 250 AirTTL, B1X 500 AirTTL, B2 250 AirTTL, D2 500 AirTTL, D2 1000 AirTTL, Pro-10 2400 AirTTL, and B1 500 AirTTL Air without TTL or HSS: D1 Air 250, D1 Air 500, D1 Air 1000, D4 1200 Air, D4 2400 Air, D4 4800 Air, Pro-B4 1000 Air, Pro-8a 1200, and Pro-8a 2400

Q: 2. Does this work with b2

A: Yes it does work with Profoto B2

Q: 3. Can I use it with a Nikon mount A1?

A: If you mount this on Canon camera and want to trigger Nikon version of A1 yes you can . I you are using Nikon camera than you need Nikon version of this

Q: 4. To send line-level signal of my Conn6 to mic-level input of ZV-10E10, what would I need in between?? XLR-K3M? Beachtek DXA? TY.

A: You can use a 3.5mm headphone extension cable as long as is needed, like B&H #PEMMSB110B, from the mini stereo output on the back of the Lewitt CONNECT 6 Desktop 6x6 Dual USB-C Audio Interface for Computer and Phone/Tablet. You would need to pair the extension cable with a line to mic attenuator cable, like B&H # KOACH425MON, which would connect to the mic input on your Sony ZV-E10 camera.

Q: 5. I was told that the Nikon version of the Profoto Connect works as a ‘Universal’ remote when used in manual mode, and will work on both Fuji and Canon to trigger the lights. Can someone please verify this before I make a purchase? Thank you!

A: Yes the center pin is universal and works with most cameras on manual , NO TTL or HSS

Q: 6. Is it normal for the device to lose connection or not be recognized by a Mac Studio after the Mac goes to sleep?

A: Audio interfaces such as the Lewitt CONNECT 6 cannot maintain a connection to a computer while the computer is in sleep mode. During this time USB connections are not active and connection will resume when the computer "wakes up."

Q: 7. can this be used with any other prompter software? MAC COMPATIBLE?

A: Yes, the foot controller will work with any teleprompter system but can only be driven using autocue software.

Q: 8. if i connect my iPhone to this with USB c to lightning, will the audio from my phone go to the interface and will the audio from the interface go to my iPhone?

A: Yes, the Lewitt CONNECT 6 Desktop 6x6 Dual USB-C Audio Interface for Computer and Phone/Tablet can be connected to an iPhone with a USB-C to Lightning adapter and audio will be sent in both directions, into and out of the interface.

Q: 9. Does this come with the power cable?

A: Yes, the Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth (B&H# TERTMDRSLCRB) includes the Teradek RT Power 3-Pin D-Tap (also called P-Tap) Cable. That has a D-tap (compatible with P-tap) male connector on one end and a male 3-pin connector on the other for power.

Q: 10. The Profoto Air Remote TTL-N works with Hasselblad X1D. An this unit as well?

A: The camera needs to be in electronic shutter and wireless mode.