The Mount-It! MI-21057 Pole-to-Wall Mounting Bracket provides a straightforward way to help stabilize and secure flat panel pole-type mounts to nearby walls. It is designed to hold poles up to 2" in outer diameter to help reduce vibration and sway, especially with large multi-display applications.

For Securing Poles to Walls    6.1" from Wall to Center of Pole    For Use with Poles up to 2" in Diameter    Floor-Standing & Floor-to-Ceiling Mounts

Related Questions and Answers

Q: 1. For the metal chain, there are no instructions as to how to put it on the drive, as there are for the plastic ones. The plastic ones come opened up so they can be closed after threading. All I can figure out is that the varidrive has to be dissassembled to install the chain, Is that correct?

A: Yes, the black knobs unscrew allowing access for the chain to the gear.

Q: 2. Does buying the metal chain version really make a difference?

A: Yes. Both systems work, but the metal chain has better build and durability and has decent tension. Also, I feel the weight of the chain helps the chain hang better and straighter. The plastic chain helps if you are on a budget, but it can seem too light at times. It basically comes down to personal preference.

Q: 3. Hey there! We wanted to install this on our ceiling, but I'm not sure how it mounts. Is there a hook system or some such thing?

A: The Neewer Roller Wall Mounting system is made for wall install only. For more support please contact our live chat team.

Q: 4. How many have secured a piece of wood to your wall first and then secured the brackets to the How many have secured a piece if wood to wall first and then secured the brackets to the wood? Since the studs are usually not the proper width apart for both brackets to be screwed in into the studs.

A: Using wood between beams to get a secure mounting point is often required. Mounting to drywall is not recommended.

Q: 5. Can this Impact Varidrive be used with Manfrotto 047-2 Alu-Core for Uncored Paper or Cloth - 9' (2.7 m)BH #MA0472 MFR #047-2?

A: Yes, you could use the Impact Varidrive with Silver Metal Chain (B&H# IMVPDDSMC2) with the Manfrotto 047-2 Alu-Core for Uncored Paper or Cloth - 9' (2.7 m) (B&H# MA0472) or with the Impact Cross Pole for Uncored Paper or Fabric Backgrounds (106.3") (B&H# IMVPC5).

Q: 6. Can I order just the metal chains?

A: You may order the chains as a replacement part through Impact directly. Here is a link to their contact page: http://bit.ly/29CMpL0

Q: 7. Can I swap different paper roles out whenever I need to? Like if I wanted to swap a red background for the grey one that's up, would I be able to easily?

A: It would be just a matter of removing the drives from the cardboard core of one paper roll in exchange for another paper roll.

Q: 8. I have this system I use for 2- 9 ft paper rolls and it worked fine for awhile but now when I move the chains it isnt catching the rolls and unwinding as it should. I have tried taking it off and reinstalling and tightening and everything. any ideas on what could be the problem?

A: There is a tension control on the drive without the chain to control how loose or how tight the drive will move. If this does not correct the issue, I would recommend speaking with the manufacturer by calling 212-594-2120.

Q: 9. How far away do I need to mount it for a 107 seamless paper?

A: If you are referring to how wide you need to set up the brackets it is just a touch wider than the roll of seamless.

Q: 10. Can these be mounted on stands?

A: Hi , in light stands no , there is some mount that you can use for that , but for me is better in the wall