Fly with precision control and the ability to receive essential telemetry with the Futaba 16IZS 18-Channel RC Transmitter R7208SB Receiverfrom Futaba. Supporting the FASSTest and S.BUS2 systems, this transmitter offers bidirectional data transmission over the 2.4 GHz wireless spectrum, and it lets you utilize multiple servos, gyros, and telemetry sensors with minimum cabling required. The telemetry received can be read aloud with the voice telemetry feature or displayed on the HVGA 4:3 color backlit LCD touchscreen, which is transflective for both indoor and outdoor use. When flying, the helicopter's throttle is smooth, while steering is fine and precise, thanks to a single ball bearing for each stick axis and a high-cycle potentiometer. Please note that the remote comes complete with an R7208SB S.BUS2 dual-antenna receiver for your aircraft.

18 Channels with 16 Linear & 2 Switched    2.4 GHz Bidirectional FASSTest System    S.BUS2 Component System Support    R7208SB S.BUS2 Receiver Included    HVGA 4:3 Color Backlit LCD Touchscreen    Use in PC Simulation via USB-C Port    Smooth Throttle Control    Voice Telemetry Can Read Data Aloud    Vibration Alerts for Low Voltage & More    Firmware Upgradable via microSD

You can fly real RC aircraft or use the transmitter like a joystick in simulation software on your Windows-based PC. Simply connect it to your PC with an optional cable connected to its USB-C port.

S-FHSS Protocol

• R2008GS
• R2008SB
• R2106SB
• R2001SB
• R2000SBM

T-FHSS Telemetry Protocol

• R3001SB
• R3004SB
• R3006SB
• R3008SB

T-FHSS Mono (Non-Telemetry)

• R3206SBM
• R3106GF

FASST7 and FASST Multi

• R6004FF
• R6008HS
• R6014HS
• R6016HF
• R616FFM
• R617FS
• R6202SBW
• R6203SB
• R6208SB
• R6303SB
• R6303SBE

FASSTest12 and FASSTest18

• R7003SB
• R7006SB
• R7008SB
• R7108SB
• R7014SB

• 18 channels (16 linear and 2 switched)
• Mount accessories onto the multi-holder with an optional M3 screw
• Use an optional microSD to store model data files and update firmware
• Vibration alerts for low voltage and other user-defined alarms
• Powerful processor allows for channel mixing to operate on a curve for precise settings and improved feel

Related Questions and Answers

Q: 1. Can I use it with a Nikon D3400 as a camera trap

A: Unfortunately, the D3400 lacks a remote shutter connection, which is required in order to use this remote set up.

Q: 2. hi I just bought this trigger ( impact power trigger) and is not working... I have a canon 6d and have put the transmitter on the hot shoe of the camera and the red light has not light up even though i tried the 16 channels. the equipment is new so I may say the battery is new too... the connection in the impact vsd 160 monolight is ok... could it be a problem on the camera? I also have trouble shooting with the original sync cord that came with the monolight... please any indications will help. Thanks

A: I had the same difficulties with my trigger. I sent it back to the manufacturer and they said they could not find anything wrong with it. I did try I few things to troubleshoot it including the battery but it still didnt work. Impact said they would ask B&H to refund me.

Q: 3. Hi I'm not able yo use this... i have a canon 6D everything is plug well I have the trigger mount in the hot shoe of the camera but every time I press the shutter the light won't pop put if I press the test buttom it works perfectly. Batteries are ok I thinks is a problem between the camera and the trigger.. Any ideas? Also imposible to use the sync cord because i can not press the shutter it looks like it freeze. Thank you!

A: Received it today. It is not working on my Westcott Stroblite Plus. Won't work on the camera, and won't trigger the monolight with the text button. Tried all 16 channels. Any suggestions???

Q: 4. Will this trigger more than one flash unit or do two receivers need to be purchased?

A: A receiver for each flash/strobe needs to be purchased.

Q: 5. Does the on camera transmitter have an off switch or does it not consume battery when not in use?

A: No, the following unit does not offer a on/ off switch.

Q: 6. If the battery is finished, does it works when powered with 5v 2a, or it needs more? What are the min and max power input values?

A: No, the Teradek Spark 4K Transmitter (B&H# TE101856) specifically requires a USB PD power source, as can be seen on pp. 2-3 of the manual: https://bhpho.to/3DW1q7u A good option for powering it in the field would be to use the Belkin Boost Charge USB Type-C Power Bank (20,000mAh, 30W) (B&H# BEBPB002BTBK): https://bhpho.to/3xeqtBk

Q: 7. How many Teradek Spark 4K transmitter/receiver sets can you use at the same time?

A: the unit will accommodate 4 sets in same location anything more than that we would suggest the following. Review the 4k bolt 750 series

Q: 8. Does the transmitter and receiver have to be line of sight?

A: Thanks to the 16 Wireless Channels, 2.4 GHz Frequency, it does not have to be line of sight.

Q: 9. does the work with 470ex ai bounce flash?

A: Yes this will work with the 470 EX flash.

Q: 10. Important question.. For how long can the unit operate continuously before it overheats?

A: B&H does not perform bench tests on products. According to manufacturer tests, the product has undergone testing that saw it running for over a week in standard operating conditions and no issues have been reported, including overheating.