Designed to enhance the accuracy and isolation of the TM-70T handheld tuner, the black CM-400 Contact Microphone from Korg offers superior tuning performance on a variety of instruments, including wind, brass, and stringed instruments. With its universal rubber-lined instrument clip, the CM-400 delivers faster, more precise tuning.

Designed for TM-70T Tuner    Mounts Directly to Instrument Surface    Increases Tuning Accuracy    Works with Most Instruments    Piezoelectric Element    Ultrastable Clip

The CM-400 is a clip-type contact microphone using piezoelectric elements that transmit vibrations directly to the tuner by attaching the microphone to your instrument. The CM-400 enables a more accurate tuning than the microphone on the tuner itself, and allows the tuner to detect the instrument's pitch more reliably, especially when practicing with a large group or in other environments where the signal is easily affected by other sounds.

The cable, which excels in efficient sound transmission, is made of a material with a soft and flexible wire sheath. The split shape of the joint between the clip and the cable reduces the load on the wire and makes it difficult for the cable to break.

The maximum width of the clip is 1.2", and the inner rubber part is designed to be attached to any instrument without leaving any mark or causing any damage. It can be attached easily and securely to a variety of instruments, such as the bells on wind instrument, the heads of bowed string instruments (such as a violin), guitar, bass and ukulele heads, and more.

Related Questions and Answers

Q: 1. is this made of plastic?

A: The Windtech CM 58 is a plastic mount. We do carry some similar products that are brass such as the Windtech CM57 and the Audio Technica AT8469.

Q: 2. Would this work with an Olympus WS-852 recorder? If not, is there an adapter that would work? And if not, is there another white lav mic you could recommend?

A: Lin K,The TM-10LW is designed to work with units that utilize stereo 1/8 microphone inputs and Sennheiser style screw lock connectors. Contact Olympus and ask them directly if this is what that particular model uses. Full details on the microphone that they might need are available here: a href= http://www.tascam.com/product/tm-10lw/ target= _blank http://www.tascam.com/product/tm-10lw//aThank you for your interest in TASCAM products

Q: 3. Will this work with Sennheiser wireless transmitters?

A: Yes, this mic has the same wiring and cuff as Sennheiser 3.5mm mics.

Q: 4. Will this work on the Sony FX3?

A: This mic will work with the Sony FX3 camera, by utilizing one of the XLR inputs on the included De 2 x XLR/TRS Adapter Handle. Be sure to engage "48+ Phantom Power."

Q: 5. Will this work with the Sony UWP-D21 Camera-Mount Wireless?

A: This mic is not wired correctly for a Sony wireless system. Here is a Sony compatible alternative, B&H # SEOLM2S.

Q: 6. How can this mic be connected to an iPhone with Lightning connector?

A: Since the Tascam TM-10L has a 3.5mm TRS locking connector, it will not connect securely to a non-locking 3.5mm TRS female connector on a standard Lightning adapter. As another option, you could use an XLR adapter like the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) which has a threaded 3.5mm TRS female connector and a built-in phantom power converter. The mic and XLR adapter can be connected to a mobile interface with an XLR mic input that is capable of supplying phantom power. An interface like the IK Multimedia iRig Pre HD Audio Interface with Mic Pre (B&H # IKIRIGPREHD) or the Saramonic SmartRig Di, Single-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices (B&H # SASMARTRIGDI) would do the job. It would be much easier to just use a different microphone that is designed for use with an iPhone such as the Saramonic LavMicro DI Broadcast Lavalier Microphone with Lightning Connector (B&H # SALAVMICRODI), the Saramonic LavMicro U1A Omnidirectional Lavalier Microphone with Lightning Connector for iOS Devices - 6.5' Cable (B&H # SALAVMICRU1A), the Comica Audio SIG.LAV V05 MI Omnidirectional Lavalier Microphone with Gain and Monitoring for iOS Devices - Lightning (B&H # COSIGLAVV05M), or the Vidpro XM-LT Omnidirectional Lavalier Microphone with Lightning Connector (B&H # VIXMLT). These are only a few of the Lightning-equipped microphones that are available.

Q: 7. Does this has black color version? and can i use it on Senheiser EW100 G2?

A: Item# TATM10LB is the black version. As far as I know, Tascam is using the same wiring configuration as Sennheiser. That being said, there is no way to guarantee compatibility with the Sennheiser wireless transmitters.

Q: 8. Will it work with the tentacle sync Track E?

A: Yes, the Tascam TM-10L and TM-10LW are compatible for use with the Tentacle Sync Track E.

Q: 9. Are there any adapters that can be used to make this work with an Olympus WS-852 recorder?

A: Unfortunately not. The Olympus WS-852 has one 3.5mm mic input. Due to the locking collar on the lav's connector it is very unlikely that it will make contact as the recorder would need to have the same connector.

Q: 10. How can i trigger the dry contacts to test everything is working correctly?

A: Please contact APC directly for testing and troubleshooting guidance: APC:Tel: 800-555-2725 or 877-800-4272Website: a href= http://www.apc.com/ target= _blank http://www.apc.com//a