The black Focal Aria Evo X Two-Way Center Channel Speaker can be easily combined with any of the other Aria series speakers to create an impressive surround sound system. Timber matched to obtain sonic coherence with a variety of configurations, the two-way design features two 6.5" Flax bass-midrange cones with TMD surround for neutral midrange with notable bass, and the 1" M-shaped inverted dome TAM tweeter with waveguide for smooth highs and lower directivity.

Along with the precision drivers, a rear-facing twin port lowers dynamic compression while increasing depth and impact. The Aria Evo X Center's cabinet is made from an ultra-rigid MDF construction, with leather front and black high-gloss finished non-parallel side panels to reduce vibration. The Aria Evo X Center is ideal for rooms measuring from 215 ft² and from a recommended listening distance of 10'. All Focal speaker drivers are developed and manufactured in France by Focal.

2-Way Speaker Design    1" M-Shaped Inverted Dome TAM Tweeter    Two 6.5" Flax Mid-Bass Drivers with TMD    57 Hz to 30 kHz Frequency Response    20 to 120W Recommended Amplifier Power    8-Ohm Nominal Impedance    Ultra-Rigid MDF Construction    Magnetic Grille

The M-shaped inverted dome TAM tweeter is the successor of the TNF tweeter from the previous Aria generation. It comprises an inverted dome cone made from an aluminium-magnesium alloy, which Focal has molded into the exclusive M shape. This innovative feature reproduces the treble more faithfully by going further into the high and low ends of the spectrum. Its directivity is even less that of the inverted dome tweeter, allowing for more flexibility in terms of listening position. Mechanically speaking, the M shape gives the dome much more rigidity, while reducing distortion even more.

More than 30 years of research and development into engineering a diaphragm that is light, rigid, well damped, and made of sustainable materials has lead Focal to the Flax sandwich or F cone. Flax is twice as light as fiberglass, because the fiber is hollow. It also has very-low elasticity, which makes it ideal to increase the flexural rigidity of the sandwich. To design a high-performance diaphragm, you have to optimize a complex set of criteria, which are for the most part contradictory. The composite solution using Flax in a sandwich structure with fiberglass skins is a very harmonious way of combining low mass with high internal damping, high velocity of sound, and high flexural rigidity.

The Flax cone is made in France exclusively by Focal since 2013. With its original design, the cone is entirely oriented towards acoustic performance. F cones are characterized by their natural sound, with low coloration, their richness of reproduction in the midrange register and their tighter bass.

The midrange speaker drivers of the Aria Evo X line boast the TMD. The Tuned Mass Damper (TMD) is a patented technology involving circular beads molded into the mass of the surround and judiciously sized and positioned. They stabilize how the surround behaves to avoid deformation of the cone and any negative impact on the dynamics, which leads to more faithfully reproduced midrange sound.

Founded in 1979, Focal continues to write its own history each day, driven by men and women who possess unique know-how. Focal is proud to manufacture exceptional products in their production workshops in Saint Étienne and cabinetry workshops in Bourbon-Lancy, France. Every day they honor this exclusive heritage, which has afforded Focal certification as a French Living Heritage Company and recognition worldwide.

Related Questions and Answers

Q: 1. will this work with the weebill S?

A: This battery is listed for use with the Weebil S.

Q: 2. Can the input form the amplifier be over 100 watt, e.g. 300 watts? So as long as the output is 100 watts on each channel?

A: As long as you are only sending the Pyle Pro PSS4 4 High Power Speaker Selector a maximum of 100W to the left and right amplifier inputs, it will be fine. Make sure you can set a maximum output wattage on your amplifier's outputs beforehand.

Q: 3. are these rechargeable?

A: Yes, the EVO Gimbals IMR-18650 High-Capacity Li-Ion 2600mAh Batteries (3-Pack) are rechargeable. A good option for a charger would be the ikan DLYFULL D4 Smart Charger, BH #IKICHSC4D4.

Q: 4. can this be used with 70V line amplifier?

A: No. This selector can handle 100W per speaker channel that run on 8 ohms.

Q: 5. Will these batteries work with the Nucleus-M follow focus system?

A: The EVO Gimbals IMR-18650 High-Capacity Li-Ion 2600mAh Batteries (3-Pack) (B&H# EVO50696) are compatible with the Tilta Nucleus-M Wireless Lens Control System (B&H# TINUCLEUSM). See below: https://bhpho.to/3RZDc2X

Q: 6. Would this work for my Rode video mic pro to set on a stage with an extension cable to my camera?

A: I agree it would work. I have mounted a Nikon d7000 with 18-105mm lens on it and had no problems. Given the weight and size of the Rode video mic there should be no problem mounting it to this tripod.

Q: 7. Does this come with rack mount ears?

A: The Pyle Pro PSPVC6 6-Channel High Power Speaker Selector does not come with rack mount ears.

Q: 8. Will this baateries work on Feiyutech A2000?

A: Gimbals like the Feiyu A2000 work with 18650 type batteries. However, there are a lot of inconsistencies with this type of battery and the size. However, the EVO Gimbals IMR-18650 High-Capacity Li-Ion 2600mAh Batteries should work with you gimbal. Please note your gimbal requires four batteries.

Q: 9. Can I use all 4 speaker outputs at once? Or do I have to select just one output?

A: You shouldn't. Its just a switch. Selecting multiple speaker sets lowers the Ohms (resistance/Impedence) on that channel, and it can overload the Amp (receiver), burning it out.

Q: 10. Will these batteries work with the Moza Air 2?

A: No, We only recommend using Moza brand batteries for their gimbal models. The EVO batteries may work but we do not guaranty this. Recommended battery is - Moza Li-Ion Battery for Moza Air 2 (4-Pack) BH #MOMCG7