Find your target in the dark, aim with your own customized reticles, and record the moments before, during, and after your shot with the ATN ThOR 5 640 5-40x Thermal Riflescope 60Hzfrom ATN. Along with a ballistic calculator and a laser rangefinder, the ThOR 5 features a customizable mil dot reticle and a reticle editor you can use to design your own crosshairs. Recoil-activated video captures the action 10 seconds before and 5 seconds after the shot. Dual-stream video capability allows you to stream over Wi-Fi while simultaneously recording on a microSD card. Imagery on the OLED display is shown in your choice of black hot, white hot, and color.

The weather-resistant scope looks and feels much like an optical riflescope, and mounts on your rifle's Picatinny rail with your choice of a pair of mounting rings or a one-piece, two-ring, quick detach mount, both included. Control buttons on the top are easy and intuitive, and eye relief is a comfortable 90mm.

640 x 480 Thermal Sensor    1024 x 768 OLED Display    Ballistic Calculator    Laser Rangefinder    Mil Dot Reticle, or Make Your Own    Recoil Activated 60 fps Video    Stream & Record Video at Same Time    Aluminum Housing/30mm Maintube

• 640 x 480 ATN generation 640 thermal core
• 60 Hz refresh rate

• 5-40x magnification
• 90mm eye relief

• Wi-Fi and Bluetooth connectivity
• microSD memory slot with a 4-64GB capacity
• USB Type-C port for charging and PC connection
• E-compass, 3D gyroscope, e-barometer, 3D accelerometer, microphone

• 1280 x 720 display
• 1280 x 720 at 60 fps recording resolution
• Recoil activated recording captures 10 seconds before shot and 5 seconds after
• Black hot, white hot, and color modes
• Dual Stream allows simultaneous streaming and recording

• Intuitive user interface, compact control pad on the top
• In-view sensor readouts and status indicators
• Smart Rangefinder feature estimates distances and adjusts point of impact
• Ballistic Calculator makes corrections for your firearm, caliber, ammunition, range, wind, and aiming angle
• Aluminum alloy construction
• 30mm maintube diameter
• Impact-resistant electronics

Related Questions and Answers

Q: 1. Is the KX-40x compatible with Kirk Arca style mounting plates?

A: Yes, it does. The standard is Arca, so it doesn't matter if the manufacturer is Kirk, RRS, etc. If the mounting plates are Arca compatible, it will work with the KX-40x ball head.

Q: 2. will this head hold my canon 600mm mk2 with 1.4x convertor and 1DXMK2 rig without creep?

A: It probably will, as long as it is not too cold, the wind is not too high, and your subject is not too vertical. I have a D500 with a 200-500 (no TC), and the head is usually very solid. It crept a bit during the lunar eclipse last month, but it was 2 degrees, with a 25 mile an hour wind and the moon was almost straight up. I still got several great images.

Q: 3. Will this ball head work on an INDURO CM34 CARBON 8X CM SER. 4-SEC MONOPOD?If so, does it simply screw into the top or does it connect into a quick release?

A: There is no quick release mechanism to attach the ball head to a tripod or monopod. It simply screws on with a standard mounting screw.

Q: 4. Why would I buy DR-40X instead of DR-40? Does -40X have everything in -40 ? Does -40X have more than -40 ?

A: While the DR-40 functions only as a portable digital audio recorder, the DR-40X also provides the option to function as a 2-channel audio interface with your computer. This would be a great consideration for podcasts. It also has an overdub recording option which is useful for musicians, where you can record a single voice or instrument and then record a 2nd audio track over the one that is already recorded. The DR-40X also has a multi-language menu, as well as a dictation mode which can be used to capture testimonials, reminders, or lectures and is made to work ideally with dictation software for transcription purposes.

Q: 5. hi, would this work well for macro work on manfrotto legs? - thanks

A: Yes, I use this ball head on a Manfrotto tripod with the center column that can be used as an arm. With the center column at 90 degrees to the tripod, I would not extend the camera to far from the center of the tripod as it can cause the tripod to tip over.

Q: 6. Does the new dr 40x allow me to record directly to my camcorder’s / dslr’s soundtrack in real time without having to sync later? If so, where is the “line out” of unit located?

A: There's a line out/ headphone output on the top left side of the recorder. This gives a line level out and your camera takes a microphone level signal, in order for the sound to come out clean in the recoding in your camera SD card you will need a attenuator cable such as the one in the link bellow https://www.bhphotovideo.com/c/product/746645-REG/Sescom_LN2MIC_ZOOMH4N_LN2MIC_ZOOMH4N_Line_to.html?sts=pi&pim=Y

Q: 7. Does it work with iPhone 13? I want to take videos with it not picture

A: Yes, the Apexel Premium Mobile Adjustable Real 20-40X Zoom Telephoto Lens, B&H # APL2040XJJ04, is compatible with iPhone 13.

Q: 8. Hello I have this ball head and would like to have suggestions for a quick release plate or any other stuff to be used for Nikon 200-500 lens? Thanks much

A: Add a Sirui ty-350 plate that balances your equipment

Q: 9. According to the info of In the Box , the quick release plate is included. But when I tried to check out, it prompted me to order the essential accessory of the quick release plate. Is the plate included or do I have to place the extra order? Also, does it fit the Oben tripod? Thank you.

A: The K-40x does come with a quick release plate, you do not need to purchase one separately unless you want a second plate. You can use the K-40x on a set of Oben legs, yes.

Q: 10. Is this ball head too big to have a tripod (in particular the sirui w-2204) reverse fold its legs around it?

A: I don't have the tripod that you mention in particular, but I have a similar, the Feisol CT-3442 Tournament Rapid, and the legs are able to reverse fold down, and the whole setup fits into the carrying bag.