Add a conference camera to your meeting room with this white NDI|HX 20x PTZ Cameras and V2 IP Controller Bundlefrom ikan. The camera features a 1/2.8" CMOS sensor and supports output up to a 1080p60 simultaneously over HDMI, SDI, and is fully licensed for NDI|HX communication. NewTek's NDI|HX allows you to utilize NDI protocols using less bandwidth than NDI.

The OTTICA features a 20x zoom with a 5.5 to 110mm wide-angle lens, which provides a range with a viewing angle of 3.3 to 54.7°, respectively. It supports 2400 to 7100K color temperature and 2D/3D noise reduction. There are HDMI, SDI, and RJ45 NDI video outputs that support up to 1080p60 video. It also includes a 3.5mm audio line input for embedding analog audio with your output. The camera can be powered via the included power adapter or via PoE (Power-over-Ethernet) over the RJ45 NDI port.

The pan, tilt, and zoom functions operate with virtual silence. It supports up to 255 presets using its RS-232 and RS-485 serial connections with a separately available controller, and it supports up to 10 presets using the included IR remote control. The camera also includes a wall-mount bracket, RS-232 cable, RS-485 terminal connector, and a cascade cable that facilitates daisy-chaining your RS-232 serial control if you use multiple cameras.

2 x OTTICA NDI|HX 1080p PTZ Cameras    OTTICA V2 IP PTZ Camera Controller    20x Optical Zoom, HDMI/SDI Output    Fully Licensed NDI|HX    IP, VISCA, and Pelco-D/P Control

1/2.8" CMOS sensor that captures up to 1080p60 video

HDMI, SDI, RJ45 Ethernet (NDI) video outputs

Fully licensed NDI|HX support

PoE (Power-over-Ethernet) support

Silent PTZ motor mechanism

5.5 to 110mm varifocal lens with 20x zoom and a 3.3 to 54.7° field of view

2D/3D noise reduction

Control PTZ using included IR remote control and PELCO-D, PELCO-P, and VISCA serial protocols

Powers with power adapter or via PoE

One 1/4"-20 mounting thread, wall mount included

Cascade connector included to support serial control of multiple cameras from one controller

Related Questions and Answers

Q: 1. Do this work with ClearOne Unite 200 camera ?

A: Yes, this controller is compatible with the ClearOne Unite 200 PTZ Camera.

Q: 2. Will this work correctly to control the AViPAS cameras over IP? Model AViPAS AV-3104IP

A: The short answer: Yes it can but we only recommend using this controller with PTZ Optics Cameras. While it is possible to use this controller with other NDI and IP cameras we cant guarantee full functionality (such as adjusting white balance color shading etc). Most of our customers that try to cross brands on IP based solutions (even in an instance like this where they both support VISCA over IP protocols) have experienced problems. For experienced IP professionals there are ways around the limitations to make this work with most IP based PTZ cameras. For people who are just starting out (or want a set up with low maintenance) we recommend matching PTZ cameras with controllers designed by the same manufacturer.

Q: 3. This camera have a built in microphone audio?

A: works well who is this?

Q: 4. Hi, this works for the OBSBOT Tail AIR?

A: Yes, the PTZCam View NDI PTZ Controller with NDI|HX Preview and Joystick Control works with the OBSBOT Tail AIR.

Q: 5. Question was answered but to wrong model. Does the JVC KY-PZ200 HD PTZ Remote 20x Zoom Camera allow you to output from both USB?

A: No, the USB-A Input on the JVC KY-PZ200 HD PTZ Remote Camera with 20x Optical Zoom is an input only.

Q: 6. Does this unit have a smoother Joystick with pan and tilt? The older units from PtzOptics are very "clunky"

A: Yes. The following unit offers a clean and smooth Full pan/tilt/zoom PTZ camera control with speed adjustments on the fly.

Q: 7. Do you have to have strong internet to use to connect cameras?

A: The connection between the remote and the cameras is a local network connection. Internet is not required for control.

Q: 8. Can this control the Canon CR-N300?

A: Both products are listed as having VISCA compatibility, however, the Canon camera is listed explicitly as having compatibility with the Canon branded RC-IP100.

Q: 9. Any Panasonic ptz compatibility, like ue80 or ue100 ?

A: The PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller Is not listed for use with Panasonic.

Q: 10. so video and control over ip?

A: This product is only a PTZ controller it can not process video. For example if you have 3 PTZ cameras this controller can command each of those cameras to Pan Tilt or Zoom but it does not have access to the IP video feed therefore it can not switch between video signals or broadcast the video signals to a destination. If you want to switch between, record, or broadcast video signals from IP cameras you will need to use a software such as vMix HD Live Production, Streaming & Mixing Software (B&H # VMSCSIVMIXHD MFR # SCSI-VMIX-HD)