Sunwayfoto T3640Cs-D+Sm-76 Carbon Fiber Hunting Tripod

Sunwayfoto T3640cs-d+sm-76 Carbon Fiber Hunting Tripod

Product Code: eq151089
Availability: In Stock

$1,587.00 $2,317.02

Qty

19 reviews Write a review

Description
Reviews (19)

The Sunwayfoto T3640CS-D+SM-76 Carbon Fiber Hunting Tripodfrom Sunwayfoto T3640CS-D+SM-76 Carbon Fiber Hunting Tripodis built for the field, providing stability at all ranges, from close-range shots to long-range targets. The tripod ball head combo is specially designed for hunting and shooting. Manufactured using advanced technology for maximum precision and quality, this carbon fiber tripod reduces your load and helps hold a rifle steady for long periods of time. It provides a working height of 8.8 to 68.1" and has a load capacity of 88.2 lb.

Load Capacity: 88.2 lb Working Height Range: 8.8-68.1" Folded Length: 28" Weighs 6.3 lb 4-Section Carbon Fiber Legs, Twist Locks 47.5° Tilting Angle Lever Lock 3-Leg Angle Stops Rubber Feet and Stainless Steel Spikes

General
Folded Length	28" / 71.1 cm
Adjustable Height Range	8.8-68.1" / 22.3-172.9 cm
Diameter	Folded Diameter: 5.8" / 14.7"
Pan Angle	23°, 55°, 85°
Leg Sections	4
Physical
Load Capacity	88.2 lb / 40 kg
Material of Construction	Carbon Fiber
Dimensions	Not Specified by Manufacturer
Weight	6.3 lb / 2.9 kg

Rubber feet provides stability on smooth surfaces and protects the floor from scratches.

Compatible with M-LOK QR plates, Picatinny, and Arca adapters.

Carbon fiber leg tube diameters of 1.6/1.4/1.3/1.1" ensure stable support.

3-leg angle stops at 23, 55, and 85°.

The tripod ships with stainless steel spikes for outdoor shooting whether it is on soft ground or sand.

There are vent holes inside the leg tubes that ensure efficient air inflow and exhaust when pulling or pushing back the leg tubes in order to extend and fold the tripod swiftly and smoothly.

Lever lock design ensures swift locking and easy operation.

Ball head embedded in the apex of the tripod offers a low center of gravity and provides better stability.

The 47.5° tilting angle prevents the tripod from side tumbling due to over loaded equipment.

Related Questions and Answers

Q: 1. This looks like it would be an awesome tripod for astrophotograpy as it has no center column - but would the leveler cause any stability issues?

A: The leveler on the Benro Mammoth Carbon Fiber Tripod is very stable.

Q: 2. I purchased one of these and the top came with a 3/8" to 1/4" adapter already installed. However, I cannot remove the adapter so that I can use it to mount a camera with a 1/4" screw mount. Has anyone else had this problem?

A: Yes, the threaded stud has a spring loaded 3/8" collar, when pressed down, reveals a 1/4-20" thread.

Q: 3. What is the actual load capacity of this tripod - the description has different numbers - 33 pounds and 50 pounds - which is correct?

A: Benro Mammoth Carbon Fiber Tripod has a load capacity of 55 lbs.

Q: 4. What is the folded length?

A: The Sunwayfoto T2540CT Traveler-Series Reverse Folding Carbon Fiber Tripod Folds down to 17.7" / 45 cm.

Q: 5. Does this have screw in feet so I can use spikes?

A: No it does not sadly.

Q: 6. Can I attach the Manfrotto MVH500AH fluid head?

A: Yes

Q: 7. The unit ships with a 3/8" adapter and acorn nut installed on the top section. How do you remove the 3/8" threaded adapter on the top section to expose the 1/4"x20 threaded post?

A: The top thread on the Sunwayfoto ET-01 Carbon Fiber Tripod Extension Tube is reversible. One side is 3/8th inch and the other is 1/4 inch.

Q: 8. What type of rifle clamp will fit on the ball head? Is it universal or is it specific to brand?

A: The Sunwayfoto T3240CS 4-Section Carbon Fiber Shooting Tripod (BH # SUT3240CS) fits M-LOK QR Plates & Arca Adapters. 3/8 & 1/4" sockets are available for additional gear. This should work: Leofoto GS-3 Rifle Clamp (B&H # LEGS3): https://bhpho.to/4egLME4

Q: 9. Can I attach the This XPRO 3-Way, Pan-and-Tilt Head to this tripod?

A: The Manfrotto 190go! Carbon Fiber M-Series Tripod has a 3/8"-16 stud and the Manfrotto XPRO 3-Way, Pan-and-Tilt Head has a 3/8"-16 socket. So you could attach the head without an adapter.

Q: 10. Could the spike be removed and use with Gitzo or RRS craw feet for using on ice lake surface?

A: The feet are interchangable, but where other manufactures use 3/8-16 imperial thread (or 1/4-20 with 3LT), Sirui have used M10x1 on this tripod. To fit alternative feet (I was after longer spikes) I used the 3LT feet (for the smaller thread) and got a thread adaptor machined. You may be able to find an adaptor off-the-shelf, but be aware there are M10x1 and M10x1.25 standards which may both be labelled as M10 Fine .

David	19/09/2024
[4] Works smooth. Came with an adapter for 1/4 tripod mount to get webcam up to eye level on crowded desktop. Had to order 3/8F to 1/4M adapter to mount webcam on top. Other than wishing it came with the adapter, great price for very useful item. 5

Robert D.	26/08/2024
[Carbon Fiber] In Florida we do a lot of bird photography in nature centers like Wakodahatchee or Green Cay. Basically boardwalks with guard rails through swampy areas. I screw the top of tube directly into the foot of my long lenses, adjust the lenght and place the bottom of the adjustable extension tube on top of the railing to provide substantial support for the considerable weight of the Nikon D850 with battery grip, with long lenses like my 600mm f/4 and 1.4 XT/c. For prolonged shooting at stationary subjects ( like nesting or courting birds) it provides a much more stabile support than a monopod and is certainly more maneuverable than either a monopod or tripod. I leave the tube attached while I walk around the boardwalk. Of course, it depends on how tall you are. At 6' it is ideal for me, but the tube would be too long for someone considerable shorter. Also I found inserting a rubberized foot on the bottom of the tube increased the stability of the rig. I use an extra rubber foot from a RRS tripod that screws directly into the bottom of the tube, but anything from a hardware store would do. I think you will find this will work if you do similar shooting. 5

Clint	17/08/2024
[Carbon Fiber] Definitely an improvement over my slik 700 and fiesol cb50d ballead. Improved stability and much less weight. 5

Mitch	01/08/2024
[Carbon Fiber] Very nicely made tripod. Surprisingly sturdy. 5

Clinton	29/07/2024
[4] Lightweight and works really well for our live video webcasts. 5

Warren J.	14/07/2024
[28" / 71.1 cm] I now own three(3) of these Travel tripods. In my first review I stated that they were a "0" Series tripod? They actually might be a "1" Series tripod? (I own several different brand "2" Series tripods. And the leg diameter on them is larger than this tripod. So I really don't understand why the #T2540? The "2" usually stands for the top leg's diameter; and "4" usually stands for "4" leg sections. Either way? These are really nice; strong, lightweight, compact carbon fiber tripods. I am a Birding Guide: and I am now using these tripods with three Maven #C1 65mm Spotting scopes. Obviously: they have worked out very well for me. As I have now purchased three(3) of them. An excellent dollar value at B&H Photos selling price! So far; I can highly recommend them. [A years use in all kinds of weather condition's, and constantly being setup, and taken down will tell how rugged they actually are?] ! 5

Miroslav	13/07/2024
[28" / 71.1 cm] Have 4 manfrotto tripods since 2009 5

Richard	09/07/2024
[28" / 71.1 cm] Really nice tripod. It locks in a 22lb precision rifle no problem and holds it rock solid. The quick release levers are very convenient. The ball head is a little smaller than I expected but it's still really strong. If you can afford it I'd recommend spending and extra $110 and getting the master series with a 65 IB head. 5

Warren J.	03/07/2024
[28" / 71.1 cm] Excellent little "0" Series tripod. Purchased for use with a small Kowa TSN-501 55mm spotting scope for children to use at Birding - Eagle Festival's. A nice, very lightweight outfit. Well made out of high end materials! Fit and finish is excellent! An excellent dollar value at B&H Photo's selling price! So pleased with its quality, workmanship, and fit & finish! I hope to be ordering a second one within the next few months for a second Kowa 55mm spotting scope I own. 5